INFO: Using directory: "2" INFO: Using existing c-file: ./Tomography.c INFO: Using existing binary: ./Tomography.out INFO: === WARNING: --mpi=20 given, ignoring --scan_split=auto (scan points run serially via MPI) INFO: Running Scanner, result file is "2/mccode.dat" LinearInterval from N=72 and intervals={'omega': ['0', '355']} INFO: Scan base seed: 1000 INFO: omega: 0 INFO: Output step into scan directory 2/0 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/0]. Time: 0 [s] Finally [Tomography: 2/0]. Time: 0 [s] Finally [Tomography: 2/0]. Time: 0 [s] Finally [Tomography: 2/0]. Time: 0 [s] Finally [Tomography: 2/0]. Time: 0 [s] Finally [Tomography: 2/0]. Time: 0 [s] Finally [Tomography: 2/0]. Time: 0 [s] Finally [Tomography: 2/0]. Time: 0 [s] Finally [Tomography: 2/0]. Time: 0 [s] Finally [Tomography: 2/0]. Time: 0 [s] Finally [Tomography: 2/0]. Time: 0 [s] Finally [Tomography: 2/0]. Time: 0 [s] Detector: monitor_I=1.03262e-09 monitor_ERR=7.93132e-13 monitor_N=1.87586e+06 "monitor_1793332141.x_y" Finally [Tomography: 2/0]. Time: 0 [s] Finally [Tomography: 2/0]. Time: 0 [s] Finally [Tomography: 2/0]. Time: 0 [s] Finally [Tomography: 2/0]. Time: 0 [s] Finally [Tomography: 2/0]. Time: 0 [s] Finally [Tomography: 2/0]. Time: 0 [s] Finally [Tomography: 2/0]. Time: 0 [s] Finally [Tomography: 2/0]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write headers INFO: Wrote headers INFO: Write step detectors line into 2/mccode.dat INFO: omega: 5 INFO: Output step into scan directory 2/1 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/1]. Time: 0 [s] Finally [Tomography: 2/1]. Time: 0 [s] Finally [Tomography: 2/1]. Time: 0 [s] Finally [Tomography: 2/1]. Time: 0 [s] Finally [Tomography: 2/1]. Time: 0 [s] Finally [Tomography: 2/1]. Time: 0 [s] Finally [Tomography: 2/1]. Time: 0 [s] Finally [Tomography: 2/1]. Time: 0 [s] Finally [Tomography: 2/1]. Time: 0 [s] Finally [Tomography: 2/1]. Time: 0 [s] Finally [Tomography: 2/1]. Time: 0 [s] Finally [Tomography: 2/1]. Time: 0 [s] Finally [Tomography: 2/1]. Time: 0 [s] Finally [Tomography: 2/1]. Time: 0 [s] Finally [Tomography: 2/1]. Time: 0 [s] Finally [Tomography: 2/1]. Time: 0 [s] Finally [Tomography: 2/1]. Time: 0 [s] Finally [Tomography: 2/1]. Time: 0 [s] Detector: monitor_I=1.02947e-09 monitor_ERR=7.91919e-13 monitor_N=1.87411e+06 "monitor_1793332142.x_y" Finally [Tomography: 2/1]. Time: 0 [s] Finally [Tomography: 2/1]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 10 INFO: Output step into scan directory 2/2 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] Detector: monitor_I=1.02064e-09 monitor_ERR=7.8851e-13 monitor_N=1.87442e+06 "monitor_1793332142.x_y" Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 15 INFO: Output step into scan directory 2/3 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/3]. Time: 0 [s] Finally [Tomography: 2/3]. Time: 0 [s] Finally [Tomography: 2/3]. Time: 0 [s] Finally [Tomography: 2/3]. Time: 0 [s] Finally [Tomography: 2/3]. Time: 0 [s] Finally [Tomography: 2/3]. Time: 0 [s] Finally [Tomography: 2/3]. Time: 0 [s] Finally [Tomography: 2/3]. Time: 0 [s] Finally [Tomography: 2/3]. Time: 0 [s] Finally [Tomography: 2/3]. Time: 0 [s] Finally [Tomography: 2/3]. Time: 0 [s] Finally [Tomography: 2/3]. Time: 0 [s] Finally [Tomography: 2/3]. Time: 0 [s] Finally [Tomography: 2/3]. Time: 0 [s] Finally [Tomography: 2/3]. Time: 0 [s] Finally [Tomography: 2/3]. Time: 0 [s] Finally [Tomography: 2/3]. Time: 0 [s] Finally [Tomography: 2/3]. Time: 0 [s] Finally [Tomography: 2/3]. Time: 0 [s] Detector: monitor_I=1.01229e-09 monitor_ERR=7.85271e-13 monitor_N=1.87479e+06 "monitor_1793332143.x_y" Finally [Tomography: 2/3]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 20 INFO: Output step into scan directory 2/4 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 [Tomography] Initialize Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/4]. Time: 0 [s] Finally [Tomography: 2/4]. Time: 0 [s] Finally [Tomography: 2/4]. Time: 0 [s] Finally [Tomography: 2/4]. Time: 0 [s] Finally [Tomography: 2/4]. Time: 0 [s] Finally [Tomography: 2/4]. Time: 0 [s] Finally [Tomography: 2/4]. Time: 0 [s] Finally [Tomography: 2/4]. Time: 0 [s] Finally [Tomography: 2/4]. Time: 0 [s] Finally [Tomography: 2/4]. Time: 0 [s] Finally [Tomography: 2/4]. Time: 0 [s] Finally [Tomography: 2/4]. Time: 0 [s] Finally [Tomography: 2/4]. Time: 0 [s] Finally [Tomography: 2/4]. Time: 0 [s] Finally [Tomography: 2/4]. Time: 0 [s] Finally [Tomography: 2/4]. Time: 0 [s] Detector: monitor_I=1.00774e-09 monitor_ERR=7.83503e-13 monitor_N=1.87578e+06 "monitor_1793332144.x_y" Finally [Tomography: 2/4]. Time: 0 [s] Finally [Tomography: 2/4]. Time: 0 [s] Finally [Tomography: 2/4]. Time: 0 [s] Finally [Tomography: 2/4]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 25 INFO: Output step into scan directory 2/5 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 [Tomography] Initialize Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] Detector: monitor_I=1.00504e-09 monitor_ERR=7.82451e-13 monitor_N=1.87431e+06 "monitor_1793332144.x_y" Finally [Tomography: 2/5]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 30 INFO: Output step into scan directory 2/6 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/6]. Time: 1 [s] Finally [Tomography: 2/6]. Time: 1 [s] Finally [Tomography: 2/6]. Time: 1 [s] Finally [Tomography: 2/6]. Time: 1 [s] Finally [Tomography: 2/6]. Time: 1 [s] Finally [Tomography: 2/6]. Time: 1 [s] Finally [Tomography: 2/6]. Time: 1 [s] Finally [Tomography: 2/6]. Time: 1 [s] Finally [Tomography: 2/6]. Time: 1 [s] Finally [Tomography: 2/6]. Time: 1 [s] Finally [Tomography: 2/6]. Time: 1 [s] Finally [Tomography: 2/6]. Time: 1 [s] Finally [Tomography: 2/6]. Time: 1 [s] Finally [Tomography: 2/6]. Time: 1 [s] Finally [Tomography: 2/6]. Time: 1 [s] Finally [Tomography: 2/6]. Time: 1 [s] Detector: monitor_I=1.00344e-09 monitor_ERR=7.81824e-13 monitor_N=1.87392e+06 "monitor_1793332145.x_y" Finally [Tomography: 2/6]. Time: 1 [s] Finally [Tomography: 2/6]. Time: 1 [s] Finally [Tomography: 2/6]. Time: 1 [s] Finally [Tomography: 2/6]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 35 INFO: Output step into scan directory 2/7 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 [Tomography] Initialize Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] Detector: monitor_I=1.00153e-09 monitor_ERR=7.81077e-13 monitor_N=1.87391e+06 "monitor_1793332146.x_y" Finally [Tomography: 2/7]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 40 INFO: Output step into scan directory 2/8 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/8]. Time: 0 [s] Finally [Tomography: 2/8]. Time: 0 [s] Finally [Tomography: 2/8]. Time: 0 [s] Finally [Tomography: 2/8]. Time: 0 [s] Finally [Tomography: 2/8]. Time: 0 [s] Finally [Tomography: 2/8]. Time: 0 [s] Finally [Tomography: 2/8]. Time: 0 [s] Finally [Tomography: 2/8]. Time: 0 [s] Finally [Tomography: 2/8]. Time: 0 [s] Finally [Tomography: 2/8]. Time: 0 [s] Finally [Tomography: 2/8]. Time: 0 [s] Finally [Tomography: 2/8]. Time: 0 [s] Finally [Tomography: 2/8]. Time: 0 [s] Finally [Tomography: 2/8]. Time: 0 [s] Finally [Tomography: 2/8]. Time: 0 [s] Finally [Tomography: 2/8]. Time: 0 [s] Finally [Tomography: 2/8]. Time: 0 [s] Finally [Tomography: 2/8]. Time: 0 [s] Finally [Tomography: 2/8]. Time: 0 [s] Detector: monitor_I=1.00183e-09 monitor_ERR=7.81193e-13 monitor_N=1.87318e+06 "monitor_1793332147.x_y" Finally [Tomography: 2/8]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 45 INFO: Output step into scan directory 2/9 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] Detector: monitor_I=1.00257e-09 monitor_ERR=7.81482e-13 monitor_N=1.8739e+06 "monitor_1793332147.x_y" Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 50 INFO: Output step into scan directory 2/10 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Detector: monitor_I=1.00377e-09 monitor_ERR=7.8195e-13 monitor_N=1.87552e+06 "monitor_1793332148.x_y" Finally [Tomography: 2/10]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 55 INFO: Output step into scan directory 2/11 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/11]. Time: 0 [s] Finally [Tomography: 2/11]. Time: 0 [s] Finally [Tomography: 2/11]. Time: 0 [s] Finally [Tomography: 2/11]. Time: 0 [s] Finally [Tomography: 2/11]. Time: 0 [s] Finally [Tomography: 2/11]. Time: 0 [s] Finally [Tomography: 2/11]. Time: 0 [s] Finally [Tomography: 2/11]. Time: 0 [s] Finally [Tomography: 2/11]. Time: 0 [s] Finally [Tomography: 2/11]. Time: 0 [s] Finally [Tomography: 2/11]. Time: 0 [s] Finally [Tomography: 2/11]. Time: 0 [s] Finally [Tomography: 2/11]. Time: 0 [s] Finally [Tomography: 2/11]. Time: 0 [s] Finally [Tomography: 2/11]. Time: 0 [s] Finally [Tomography: 2/11]. Time: 0 [s] Detector: monitor_I=1.00135e-09 monitor_ERR=7.81007e-13 monitor_N=1.87167e+06 "monitor_1793332149.x_y" Finally [Tomography: 2/11]. Time: 0 [s] Finally [Tomography: 2/11]. Time: 0 [s] Finally [Tomography: 2/11]. Time: 0 [s] Finally [Tomography: 2/11]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 60 INFO: Output step into scan directory 2/12 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Detector: monitor_I=1.00208e-09 monitor_ERR=7.81292e-13 monitor_N=1.87319e+06 "monitor_1793332149.x_y" Finally [Tomography: 2/12]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 65 INFO: Output step into scan directory 2/13 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] Detector: monitor_I=1.00223e-09 monitor_ERR=7.8135e-13 monitor_N=1.87366e+06 "monitor_1793332150.x_y" Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 70 INFO: Output step into scan directory 2/14 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] Detector: monitor_I=1.00386e-09 monitor_ERR=7.81983e-13 monitor_N=1.87508e+06 "monitor_1793332151.x_y" Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 75 INFO: Output step into scan directory 2/15 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/15]. Time: 0 [s] Finally [Tomography: 2/15]. Time: 0 [s] Finally [Tomography: 2/15]. Time: 0 [s] Finally [Tomography: 2/15]. Time: 0 [s] Finally [Tomography: 2/15]. Time: 0 [s] Detector: monitor_I=1.00454e-09 monitor_ERR=7.82251e-13 monitor_N=1.87604e+06 "monitor_1793332152.x_y" Finally [Tomography: 2/15]. Time: 0 [s] Finally [Tomography: 2/15]. Time: 0 [s] Finally [Tomography: 2/15]. Time: 0 [s] Finally [Tomography: 2/15]. Time: 0 [s] Finally [Tomography: 2/15]. Time: 0 [s] Finally [Tomography: 2/15]. Time: 0 [s] Finally [Tomography: 2/15]. Time: 0 [s] Finally [Tomography: 2/15]. Time: 0 [s] Finally [Tomography: 2/15]. Time: 0 [s] Finally [Tomography: 2/15]. Time: 0 [s] Finally [Tomography: 2/15]. Time: 0 [s] Finally [Tomography: 2/15]. Time: 0 [s] Finally [Tomography: 2/15]. Time: 0 [s] Finally [Tomography: 2/15]. Time: 0 [s] Finally [Tomography: 2/15]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 80 INFO: Output step into scan directory 2/16 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/16]. Time: 0 [s] Finally [Tomography: 2/16]. Time: 0 [s] Finally [Tomography: 2/16]. Time: 0 [s] Finally [Tomography: 2/16]. Time: 0 [s] Finally [Tomography: 2/16]. Time: 0 [s] Finally [Tomography: 2/16]. Time: 0 [s] Finally [Tomography: 2/16]. Time: 0 [s] Finally [Tomography: 2/16]. Time: 0 [s] Finally [Tomography: 2/16]. Time: 0 [s] Finally [Tomography: 2/16]. Time: 0 [s] Finally [Tomography: 2/16]. Time: 0 [s] Finally [Tomography: 2/16]. Time: 0 [s] Finally [Tomography: 2/16]. Time: 0 [s] Finally [Tomography: 2/16]. Time: 0 [s] Finally [Tomography: 2/16]. Time: 0 [s] Finally [Tomography: 2/16]. Time: 0 [s] Detector: monitor_I=1.00404e-09 monitor_ERR=7.82055e-13 monitor_N=1.87332e+06 "monitor_1793332153.x_y" Finally [Tomography: 2/16]. Time: 0 [s] Finally [Tomography: 2/16]. Time: 0 [s] Finally [Tomography: 2/16]. Time: 0 [s] Finally [Tomography: 2/16]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 85 INFO: Output step into scan directory 2/17 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/17]. Time: 0 [s] Finally [Tomography: 2/17]. Time: 0 [s] Finally [Tomography: 2/17]. Time: 0 [s] Detector: monitor_I=1.00662e-09 monitor_ERR=7.83062e-13 monitor_N=1.8745e+06 "monitor_1793332154.x_y" Finally [Tomography: 2/17]. Time: 0 [s] Finally [Tomography: 2/17]. Time: 0 [s] Finally [Tomography: 2/17]. Time: 0 [s] Finally [Tomography: 2/17]. Time: 0 [s] Finally [Tomography: 2/17]. Time: 0 [s] Finally [Tomography: 2/17]. Time: 0 [s] Finally [Tomography: 2/17]. Time: 0 [s] Finally [Tomography: 2/17]. Time: 0 [s] Finally [Tomography: 2/17]. Time: 0 [s] Finally [Tomography: 2/17]. Time: 0 [s] Finally [Tomography: 2/17]. Time: 0 [s] Finally [Tomography: 2/17]. Time: 0 [s] Finally [Tomography: 2/17]. Time: 0 [s] Finally [Tomography: 2/17]. Time: 0 [s] Finally [Tomography: 2/17]. Time: 0 [s] Finally [Tomography: 2/17]. Time: 0 [s] Finally [Tomography: 2/17]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 90 INFO: Output step into scan directory 2/18 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] Detector: monitor_I=1.00837e-09 monitor_ERR=7.83741e-13 monitor_N=1.87603e+06 "monitor_1793332154.x_y" Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 95 INFO: Output step into scan directory 2/19 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] Detector: monitor_I=1.00757e-09 monitor_ERR=7.83431e-13 monitor_N=1.87528e+06 "monitor_1793332155.x_y" Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 100 INFO: Output step into scan directory 2/20 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/20]. Time: 0 [s] Finally [Tomography: 2/20]. Time: 0 [s] Finally [Tomography: 2/20]. Time: 0 [s] Finally [Tomography: 2/20]. Time: 0 [s] Finally [Tomography: 2/20]. Time: 0 [s] Finally [Tomography: 2/20]. Time: 0 [s] Finally [Tomography: 2/20]. Time: 0 [s] Finally [Tomography: 2/20]. Time: 0 [s] Finally [Tomography: 2/20]. Time: 0 [s] Finally [Tomography: 2/20]. Time: 0 [s] Finally [Tomography: 2/20]. Time: 0 [s] Finally [Tomography: 2/20]. Time: 0 [s] Finally [Tomography: 2/20]. Time: 0 [s] Finally [Tomography: 2/20]. Time: 0 [s] Finally [Tomography: 2/20]. Time: 0 [s] Finally [Tomography: 2/20]. Time: 0 [s] Detector: monitor_I=1.00658e-09 monitor_ERR=7.83045e-13 monitor_N=1.875e+06 "monitor_1793332156.x_y" Finally [Tomography: 2/20]. Time: 0 [s] Finally [Tomography: 2/20]. Time: 0 [s] Finally [Tomography: 2/20]. Time: 0 [s] Finally [Tomography: 2/20]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 105 INFO: Output step into scan directory 2/21 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] Detector: monitor_I=1.00426e-09 monitor_ERR=7.82141e-13 monitor_N=1.87417e+06 "monitor_1793332156.x_y" Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 110 INFO: Output step into scan directory 2/22 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/22]. Time: 0 [s] Finally [Tomography: 2/22]. Time: 0 [s] Finally [Tomography: 2/22]. Time: 0 [s] Finally [Tomography: 2/22]. Time: 0 [s] Finally [Tomography: 2/22]. Time: 0 [s] Finally [Tomography: 2/22]. Time: 0 [s] Finally [Tomography: 2/22]. Time: 0 [s] Finally [Tomography: 2/22]. Time: 0 [s] Finally [Tomography: 2/22]. Time: 0 [s] Finally [Tomography: 2/22]. Time: 0 [s] Finally [Tomography: 2/22]. Time: 0 [s] Finally [Tomography: 2/22]. Time: 0 [s] Finally [Tomography: 2/22]. Time: 0 [s] Finally [Tomography: 2/22]. Time: 0 [s] Finally [Tomography: 2/22]. Time: 0 [s] Finally [Tomography: 2/22]. Time: 0 [s] Finally [Tomography: 2/22]. Time: 0 [s] Finally [Tomography: 2/22]. Time: 0 [s] Detector: monitor_I=1.00323e-09 monitor_ERR=7.81737e-13 monitor_N=1.87408e+06 "monitor_1793332157.x_y" Finally [Tomography: 2/22]. Time: 0 [s] Finally [Tomography: 2/22]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 115 INFO: Output step into scan directory 2/23 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] Detector: monitor_I=1.00377e-09 monitor_ERR=7.8195e-13 monitor_N=1.87613e+06 "monitor_1793332158.x_y" Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 120 INFO: Output step into scan directory 2/24 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/24]. Time: 1 [s] Finally [Tomography: 2/24]. Time: 1 [s] Finally [Tomography: 2/24]. Time: 1 [s] Finally [Tomography: 2/24]. Time: 1 [s] Finally [Tomography: 2/24]. Time: 1 [s] Finally [Tomography: 2/24]. Time: 1 [s] Finally [Tomography: 2/24]. Time: 1 [s] Finally [Tomography: 2/24]. Time: 1 [s] Finally [Tomography: 2/24]. Time: 1 [s] Finally [Tomography: 2/24]. Time: 1 [s] Finally [Tomography: 2/24]. Time: 1 [s] Finally [Tomography: 2/24]. Time: 1 [s] Detector: monitor_I=1.00223e-09 monitor_ERR=7.8135e-13 monitor_N=1.87331e+06 "monitor_1793332158.x_y" Finally [Tomography: 2/24]. Time: 1 [s] Finally [Tomography: 2/24]. Time: 1 [s] Finally [Tomography: 2/24]. Time: 1 [s] Finally [Tomography: 2/24]. Time: 1 [s] Finally [Tomography: 2/24]. Time: 1 [s] Finally [Tomography: 2/24]. Time: 1 [s] Finally [Tomography: 2/24]. Time: 1 [s] Finally [Tomography: 2/24]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 125 INFO: Output step into scan directory 2/25 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] Detector: monitor_I=1.00274e-09 monitor_ERR=7.81546e-13 monitor_N=1.87474e+06 "monitor_1793332159.x_y" Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 130 INFO: Output step into scan directory 2/26 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] Detector: monitor_I=1.00221e-09 monitor_ERR=7.81339e-13 monitor_N=1.87373e+06 "monitor_1793332160.x_y" Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 135 INFO: Output step into scan directory 2/27 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/27]. Time: 0 [s] Finally [Tomography: 2/27]. Time: 0 [s] Finally [Tomography: 2/27]. Time: 0 [s] Finally [Tomography: 2/27]. Time: 0 [s] Finally [Tomography: 2/27]. Time: 0 [s] Finally [Tomography: 2/27]. Time: 0 [s] Finally [Tomography: 2/27]. Time: 0 [s] Finally [Tomography: 2/27]. Time: 0 [s] Finally [Tomography: 2/27]. Time: 0 [s] Finally [Tomography: 2/27]. Time: 0 [s] Finally [Tomography: 2/27]. Time: 0 [s] Finally [Tomography: 2/27]. Time: 0 [s] Finally [Tomography: 2/27]. Time: 0 [s] Finally [Tomography: 2/27]. Time: 0 [s] Finally [Tomography: 2/27]. Time: 0 [s] Finally [Tomography: 2/27]. Time: 0 [s] Detector: monitor_I=1.00227e-09 monitor_ERR=7.81365e-13 monitor_N=1.87419e+06 "monitor_1793332161.x_y" Finally [Tomography: 2/27]. Time: 0 [s] Finally [Tomography: 2/27]. Time: 0 [s] Finally [Tomography: 2/27]. Time: 0 [s] Finally [Tomography: 2/27]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 140 INFO: Output step into scan directory 2/28 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off [Tomography] Initialize Number of vertices: 327 [Tomography] Initialize Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/28]. Time: 0 [s] Finally [Tomography: 2/28]. Time: 0 [s] Finally [Tomography: 2/28]. Time: 0 [s] Finally [Tomography: 2/28]. Time: 0 [s] Finally [Tomography: 2/28]. Time: 0 [s] Finally [Tomography: 2/28]. Time: 0 [s] Finally [Tomography: 2/28]. Time: 0 [s] Finally [Tomography: 2/28]. Time: 0 [s] Finally [Tomography: 2/28]. Time: 0 [s] Finally [Tomography: 2/28]. Time: 0 [s] Finally [Tomography: 2/28]. Time: 0 [s] Finally [Tomography: 2/28]. Time: 0 [s] Finally [Tomography: 2/28]. Time: 0 [s] Finally [Tomography: 2/28]. Time: 0 [s] Finally [Tomography: 2/28]. Time: 0 [s] Detector: monitor_I=1.00261e-09 monitor_ERR=7.81497e-13 monitor_N=1.87471e+06 "monitor_1793332162.x_y" Finally [Tomography: 2/28]. Time: 0 [s] Finally [Tomography: 2/28]. Time: 0 [s] Finally [Tomography: 2/28]. Time: 0 [s] Finally [Tomography: 2/28]. Time: 0 [s] Finally [Tomography: 2/28]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 145 INFO: Output step into scan directory 2/29 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 [Tomography] Initialize Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] [Tomography] Initialize *** TRACE end *** Save [Tomography] Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] Detector: monitor_I=1.00265e-09 monitor_ERR=7.81514e-13 monitor_N=1.87528e+06 "monitor_1793332162.x_y" Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 150 INFO: Output step into scan directory 2/30 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] Detector: monitor_I=1.0015e-09 monitor_ERR=7.81066e-13 monitor_N=1.87326e+06 "monitor_1793332163.x_y" Finally [Tomography: 2/30]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 155 INFO: Output step into scan directory 2/31 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Number of vertices: 327 [Tomography] Initialize Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/31]. Time: 0 [s] Finally [Tomography: 2/31]. Time: 0 [s] Finally [Tomography: 2/31]. Time: 0 [s] Finally [Tomography: 2/31]. Time: 0 [s] Finally [Tomography: 2/31]. Time: 0 [s] Finally [Tomography: 2/31]. Time: 0 [s] Finally [Tomography: 2/31]. Time: 0 [s] Finally [Tomography: 2/31]. Time: 0 [s] Finally [Tomography: 2/31]. Time: 0 [s] Finally [Tomography: 2/31]. Time: 0 [s] Finally [Tomography: 2/31]. Time: 0 [s] Finally [Tomography: 2/31]. Time: 0 [s] Finally [Tomography: 2/31]. Time: 0 [s] Finally [Tomography: 2/31]. Time: 0 [s] Finally [Tomography: 2/31]. Time: 0 [s] Finally [Tomography: 2/31]. Time: 0 [s] Finally [Tomography: 2/31]. Time: 0 [s] Finally [Tomography: 2/31]. Time: 0 [s] Detector: monitor_I=1.00326e-09 monitor_ERR=7.81756e-13 monitor_N=1.87407e+06 "monitor_1793332164.x_y" Finally [Tomography: 2/31]. Time: 0 [s] Finally [Tomography: 2/31]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 160 INFO: Output step into scan directory 2/32 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/32]. Time: 0 [s] Finally [Tomography: 2/32]. Time: 0 [s] Finally [Tomography: 2/32]. Time: 0 [s] Finally [Tomography: 2/32]. Time: 0 [s] Finally [Tomography: 2/32]. Time: 0 [s] Finally [Tomography: 2/32]. Time: 0 [s] Finally [Tomography: 2/32]. Time: 0 [s] Finally [Tomography: 2/32]. Time: 0 [s] Finally [Tomography: 2/32]. Time: 0 [s] Finally [Tomography: 2/32]. Time: 0 [s] Finally [Tomography: 2/32]. Time: 0 [s] Finally [Tomography: 2/32]. Time: 0 [s] Finally [Tomography: 2/32]. Time: 0 [s] Finally [Tomography: 2/32]. Time: 0 [s] Finally [Tomography: 2/32]. Time: 0 [s] Finally [Tomography: 2/32]. Time: 0 [s] Finally [Tomography: 2/32]. Time: 0 [s] Detector: monitor_I=1.00593e-09 monitor_ERR=7.82798e-13 monitor_N=1.87454e+06 "monitor_1793332165.x_y" Finally [Tomography: 2/32]. Time: 0 [s] Finally [Tomography: 2/32]. Time: 0 [s] Finally [Tomography: 2/32]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 165 INFO: Output step into scan directory 2/33 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/33]. Time: 1 [s] Finally [Tomography: 2/33]. Time: 1 [s] Finally [Tomography: 2/33]. Time: 1 [s] Finally [Tomography: 2/33]. Time: 1 [s] Finally [Tomography: 2/33]. Time: 1 [s] Finally [Tomography: 2/33]. Time: 1 [s] Finally [Tomography: 2/33]. Time: 1 [s] Finally [Tomography: 2/33]. Time: 1 [s] Finally [Tomography: 2/33]. Time: 1 [s] Finally [Tomography: 2/33]. Time: 1 [s] Finally [Tomography: 2/33]. Time: 1 [s] Finally [Tomography: 2/33]. Time: 1 [s] Finally [Tomography: 2/33]. Time: 1 [s] Finally [Tomography: 2/33]. Time: 1 [s] Finally [Tomography: 2/33]. Time: 1 [s] Detector: monitor_I=1.00807e-09 monitor_ERR=7.83633e-13 monitor_N=1.8749e+06 "monitor_1793332165.x_y" Finally [Tomography: 2/33]. Time: 1 [s] Finally [Tomography: 2/33]. Time: 1 [s] Finally [Tomography: 2/33]. Time: 1 [s] Finally [Tomography: 2/33]. Time: 1 [s] Finally [Tomography: 2/33]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 170 INFO: Output step into scan directory 2/34 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Detector: monitor_I=1.01306e-09 monitor_ERR=7.85574e-13 monitor_N=1.87442e+06 "monitor_1793332166.x_y" Finally [Tomography: 2/34]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 175 INFO: Output step into scan directory 2/35 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/35]. Time: 0 [s] Finally [Tomography: 2/35]. Time: 0 [s] Detector: monitor_I=1.02204e-09 monitor_ERR=7.89053e-13 monitor_N=1.87441e+06 "monitor_1793332167.x_y" Finally [Tomography: 2/35]. Time: 0 [s] Finally [Tomography: 2/35]. Time: 0 [s] Finally [Tomography: 2/35]. Time: 0 [s] Finally [Tomography: 2/35]. Time: 0 [s] Finally [Tomography: 2/35]. Time: 0 [s] Finally [Tomography: 2/35]. Time: 0 [s] Finally [Tomography: 2/35]. Time: 0 [s] Finally [Tomography: 2/35]. Time: 0 [s] Finally [Tomography: 2/35]. Time: 0 [s] Finally [Tomography: 2/35]. Time: 0 [s] Finally [Tomography: 2/35]. Time: 0 [s] Finally [Tomography: 2/35]. Time: 0 [s] Finally [Tomography: 2/35]. Time: 0 [s] Finally [Tomography: 2/35]. Time: 0 [s] Finally [Tomography: 2/35]. Time: 0 [s] Finally [Tomography: 2/35]. Time: 0 [s] Finally [Tomography: 2/35]. Time: 0 [s] Finally [Tomography: 2/35]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 180 INFO: Output step into scan directory 2/36 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize *** TRACE end *** Save [Tomography] Finally [Tomography: 2/36]. Time: 1 [s] Finally [Tomography: 2/36]. Time: 1 [s] Finally [Tomography: 2/36]. Time: 1 [s] Finally [Tomography: 2/36]. Time: 1 [s] Finally [Tomography: 2/36]. Time: 1 [s] Finally [Tomography: 2/36]. Time: 1 [s] Finally [Tomography: 2/36]. Time: 1 [s] Finally [Tomography: 2/36]. Time: 1 [s] Finally [Tomography: 2/36]. Time: 1 [s] Finally [Tomography: 2/36]. Time: 1 [s] Finally [Tomography: 2/36]. Time: 1 [s] Finally [Tomography: 2/36]. Time: 1 [s] Finally [Tomography: 2/36]. Time: 1 [s] Finally [Tomography: 2/36]. Time: 1 [s] Finally [Tomography: 2/36]. Time: 1 [s] Finally [Tomography: 2/36]. Time: 1 [s] Finally [Tomography: 2/36]. Time: 1 [s] Finally [Tomography: 2/36]. Time: 1 [s] Finally [Tomography: 2/36]. Time: 1 [s] Detector: monitor_I=1.0307e-09 monitor_ERR=7.92392e-13 monitor_N=1.87396e+06 "monitor_1793332167.x_y" Finally [Tomography: 2/36]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 185 INFO: Output step into scan directory 2/37 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] Detector: monitor_I=1.03027e-09 monitor_ERR=7.92225e-13 monitor_N=1.87491e+06 "monitor_1793332168.x_y" Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 190 INFO: Output step into scan directory 2/38 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/38]. Time: 0 [s] Finally [Tomography: 2/38]. Time: 0 [s] Finally [Tomography: 2/38]. Time: 0 [s] Finally [Tomography: 2/38]. Time: 0 [s] Finally [Tomography: 2/38]. Time: 0 [s] Finally [Tomography: 2/38]. Time: 0 [s] Detector: monitor_I=1.0209e-09 monitor_ERR=7.88612e-13 monitor_N=1.87514e+06 "monitor_1793332169.x_y" Finally [Tomography: 2/38]. Time: 0 [s] Finally [Tomography: 2/38]. Time: 0 [s] Finally [Tomography: 2/38]. Time: 0 [s] Finally [Tomography: 2/38]. Time: 0 [s] Finally [Tomography: 2/38]. Time: 0 [s] Finally [Tomography: 2/38]. Time: 0 [s] Finally [Tomography: 2/38]. Time: 0 [s] Finally [Tomography: 2/38]. Time: 0 [s] Finally [Tomography: 2/38]. Time: 0 [s] Finally [Tomography: 2/38]. Time: 0 [s] Finally [Tomography: 2/38]. Time: 0 [s] Finally [Tomography: 2/38]. Time: 0 [s] Finally [Tomography: 2/38]. Time: 0 [s] Finally [Tomography: 2/38]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 195 INFO: Output step into scan directory 2/39 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] Detector: monitor_I=1.01294e-09 monitor_ERR=7.85525e-13 monitor_N=1.8757e+06 "monitor_1793332169.x_y" Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 200 INFO: Output step into scan directory 2/40 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] Detector: monitor_I=1.00725e-09 monitor_ERR=7.83311e-13 monitor_N=1.87478e+06 "monitor_1793332170.x_y" Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 205 INFO: Output step into scan directory 2/41 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/41]. Time: 0 [s] Finally [Tomography: 2/41]. Time: 0 [s] Finally [Tomography: 2/41]. Time: 0 [s] Finally [Tomography: 2/41]. Time: 0 [s] Finally [Tomography: 2/41]. Time: 0 [s] Finally [Tomography: 2/41]. Time: 0 [s] Finally [Tomography: 2/41]. Time: 0 [s] Finally [Tomography: 2/41]. Time: 0 [s] Finally [Tomography: 2/41]. Time: 0 [s] Finally [Tomography: 2/41]. Time: 0 [s] Finally [Tomography: 2/41]. Time: 0 [s] Finally [Tomography: 2/41]. Time: 0 [s] Finally [Tomography: 2/41]. Time: 0 [s] Finally [Tomography: 2/41]. Time: 0 [s] Detector: monitor_I=1.00432e-09 monitor_ERR=7.82171e-13 monitor_N=1.87432e+06 "monitor_1793332171.x_y" Finally [Tomography: 2/41]. Time: 0 [s] Finally [Tomography: 2/41]. Time: 0 [s] Finally [Tomography: 2/41]. Time: 0 [s] Finally [Tomography: 2/41]. Time: 0 [s] Finally [Tomography: 2/41]. Time: 0 [s] Finally [Tomography: 2/41]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 210 INFO: Output step into scan directory 2/42 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/42]. Time: 0 [s] Finally [Tomography: 2/42]. Time: 0 [s] Finally [Tomography: 2/42]. Time: 0 [s] Finally [Tomography: 2/42]. Time: 0 [s] Finally [Tomography: 2/42]. Time: 0 [s] Finally [Tomography: 2/42]. Time: 0 [s] Finally [Tomography: 2/42]. Time: 0 [s] Finally [Tomography: 2/42]. Time: 0 [s] Finally [Tomography: 2/42]. Time: 0 [s] Finally [Tomography: 2/42]. Time: 0 [s] Finally [Tomography: 2/42]. Time: 0 [s] Finally [Tomography: 2/42]. Time: 0 [s] Finally [Tomography: 2/42]. Time: 0 [s] Finally [Tomography: 2/42]. Time: 0 [s] Finally [Tomography: 2/42]. Time: 0 [s] Detector: monitor_I=1.00187e-09 monitor_ERR=7.81214e-13 monitor_N=1.87257e+06 "monitor_1793332172.x_y" Finally [Tomography: 2/42]. Time: 0 [s] Finally [Tomography: 2/42]. Time: 0 [s] Finally [Tomography: 2/42]. Time: 0 [s] Finally [Tomography: 2/42]. Time: 0 [s] Finally [Tomography: 2/42]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 215 INFO: Output step into scan directory 2/43 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] Detector: monitor_I=1.00207e-09 monitor_ERR=7.81289e-13 monitor_N=1.87622e+06 "monitor_1793332172.x_y" Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 220 INFO: Output step into scan directory 2/44 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] Detector: monitor_I=1.00115e-09 monitor_ERR=7.80928e-13 monitor_N=1.87474e+06 "monitor_1793332173.x_y" Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 225 INFO: Output step into scan directory 2/45 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/45]. Time: 0 [s] Finally [Tomography: 2/45]. Time: 0 [s] Finally [Tomography: 2/45]. Time: 0 [s] Finally [Tomography: 2/45]. Time: 0 [s] Finally [Tomography: 2/45]. Time: 0 [s] Finally [Tomography: 2/45]. Time: 0 [s] Finally [Tomography: 2/45]. Time: 0 [s] Finally [Tomography: 2/45]. Time: 0 [s] Finally [Tomography: 2/45]. Time: 0 [s] Finally [Tomography: 2/45]. Time: 0 [s] Finally [Tomography: 2/45]. Time: 0 [s] Finally [Tomography: 2/45]. Time: 0 [s] Finally [Tomography: 2/45]. Time: 0 [s] Finally [Tomography: 2/45]. Time: 0 [s] Detector: monitor_I=1.00114e-09 monitor_ERR=7.80922e-13 monitor_N=1.87375e+06 "monitor_1793332174.x_y" Finally [Tomography: 2/45]. Time: 0 [s] Finally [Tomography: 2/45]. Time: 0 [s] Finally [Tomography: 2/45]. Time: 0 [s] Finally [Tomography: 2/45]. Time: 0 [s] Finally [Tomography: 2/45]. Time: 0 [s] Finally [Tomography: 2/45]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 230 INFO: Output step into scan directory 2/46 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off [Tomography] Initialize Number of vertices: 327 [Tomography] Initialize Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] Detector: monitor_I=1.001e-09 monitor_ERR=7.80868e-13 monitor_N=1.8746e+06 "monitor_1793332174.x_y" Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 235 INFO: Output step into scan directory 2/47 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/47]. Time: 1 [s] Finally [Tomography: 2/47]. Time: 1 [s] Finally [Tomography: 2/47]. Time: 1 [s] Finally [Tomography: 2/47]. Time: 1 [s] Finally [Tomography: 2/47]. Time: 1 [s] Finally [Tomography: 2/47]. Time: 1 [s] Finally [Tomography: 2/47]. Time: 1 [s] Finally [Tomography: 2/47]. Time: 1 [s] Finally [Tomography: 2/47]. Time: 1 [s] Finally [Tomography: 2/47]. Time: 1 [s] Finally [Tomography: 2/47]. Time: 1 [s] Finally [Tomography: 2/47]. Time: 1 [s] Finally [Tomography: 2/47]. Time: 1 [s] Finally [Tomography: 2/47]. Time: 1 [s] Finally [Tomography: 2/47]. Time: 1 [s] Finally [Tomography: 2/47]. Time: 1 [s] Finally [Tomography: 2/47]. Time: 1 [s] Detector: monitor_I=1.00087e-09 monitor_ERR=7.80819e-13 monitor_N=1.87258e+06 "monitor_1793332175.x_y" Finally [Tomography: 2/47]. Time: 1 [s] Finally [Tomography: 2/47]. Time: 1 [s] Finally [Tomography: 2/47]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 240 INFO: Output step into scan directory 2/48 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Detector: monitor_I=1.00133e-09 monitor_ERR=7.80995e-13 monitor_N=1.87513e+06 "monitor_1793332176.x_y" Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 245 INFO: Output step into scan directory 2/49 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/49]. Time: 0 [s] Finally [Tomography: 2/49]. Time: 0 [s] Finally [Tomography: 2/49]. Time: 0 [s] Finally [Tomography: 2/49]. Time: 0 [s] Finally [Tomography: 2/49]. Time: 0 [s] Finally [Tomography: 2/49]. Time: 0 [s] Finally [Tomography: 2/49]. Time: 0 [s] Finally [Tomography: 2/49]. Time: 0 [s] Finally [Tomography: 2/49]. Time: 0 [s] Finally [Tomography: 2/49]. Time: 0 [s] Finally [Tomography: 2/49]. Time: 0 [s] Finally [Tomography: 2/49]. Time: 0 [s] Finally [Tomography: 2/49]. Time: 0 [s] Finally [Tomography: 2/49]. Time: 0 [s] Finally [Tomography: 2/49]. Time: 0 [s] Finally [Tomography: 2/49]. Time: 0 [s] Finally [Tomography: 2/49]. Time: 0 [s] Finally [Tomography: 2/49]. Time: 0 [s] Finally [Tomography: 2/49]. Time: 0 [s] Detector: monitor_I=1.00176e-09 monitor_ERR=7.81166e-13 monitor_N=1.87542e+06 "monitor_1793332177.x_y" Finally [Tomography: 2/49]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 250 INFO: Output step into scan directory 2/50 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] Detector: monitor_I=1.00232e-09 monitor_ERR=7.81384e-13 monitor_N=1.87435e+06 "monitor_1793332177.x_y" Finally [Tomography: 2/50]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 255 INFO: Output step into scan directory 2/51 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/51]. Time: 0 [s] Finally [Tomography: 2/51]. Time: 0 [s] Finally [Tomography: 2/51]. Time: 0 [s] Finally [Tomography: 2/51]. Time: 0 [s] Finally [Tomography: 2/51]. Time: 0 [s] Finally [Tomography: 2/51]. Time: 0 [s] Finally [Tomography: 2/51]. Time: 0 [s] Finally [Tomography: 2/51]. Time: 0 [s] Finally [Tomography: 2/51]. Time: 0 [s] Finally [Tomography: 2/51]. Time: 0 [s] Finally [Tomography: 2/51]. Time: 0 [s] Finally [Tomography: 2/51]. Time: 0 [s] Finally [Tomography: 2/51]. Time: 0 [s] Finally [Tomography: 2/51]. Time: 0 [s] Finally [Tomography: 2/51]. Time: 0 [s] Finally [Tomography: 2/51]. Time: 0 [s] Finally [Tomography: 2/51]. Time: 0 [s] Finally [Tomography: 2/51]. Time: 0 [s] Detector: monitor_I=1.00255e-09 monitor_ERR=7.81475e-13 monitor_N=1.8741e+06 "monitor_1793332178.x_y" Finally [Tomography: 2/51]. Time: 0 [s] Finally [Tomography: 2/51]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 260 INFO: Output step into scan directory 2/52 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/52]. Time: 0 [s] Finally [Tomography: 2/52]. Time: 0 [s] Finally [Tomography: 2/52]. Time: 0 [s] Finally [Tomography: 2/52]. Time: 0 [s] Finally [Tomography: 2/52]. Time: 0 [s] Finally [Tomography: 2/52]. Time: 0 [s] Finally [Tomography: 2/52]. Time: 0 [s] Finally [Tomography: 2/52]. Time: 0 [s] Finally [Tomography: 2/52]. Time: 0 [s] Finally [Tomography: 2/52]. Time: 0 [s] Finally [Tomography: 2/52]. Time: 0 [s] Finally [Tomography: 2/52]. Time: 0 [s] Finally [Tomography: 2/52]. Time: 0 [s] Finally [Tomography: 2/52]. Time: 0 [s] Finally [Tomography: 2/52]. Time: 0 [s] Finally [Tomography: 2/52]. Time: 0 [s] Finally [Tomography: 2/52]. Time: 0 [s] Finally [Tomography: 2/52]. Time: 0 [s] Finally [Tomography: 2/52]. Time: 0 [s] Detector: monitor_I=1.00397e-09 monitor_ERR=7.82027e-13 monitor_N=1.87456e+06 "monitor_1793332179.x_y" Finally [Tomography: 2/52]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 265 INFO: Output step into scan directory 2/53 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] Detector: monitor_I=1.00552e-09 monitor_ERR=7.82633e-13 monitor_N=1.8731e+06 "monitor_1793332179.x_y" Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 270 INFO: Output step into scan directory 2/54 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/54]. Time: 0 [s] Finally [Tomography: 2/54]. Time: 0 [s] Finally [Tomography: 2/54]. Time: 0 [s] Finally [Tomography: 2/54]. Time: 0 [s] Finally [Tomography: 2/54]. Time: 0 [s] Finally [Tomography: 2/54]. Time: 0 [s] Finally [Tomography: 2/54]. Time: 0 [s] Finally [Tomography: 2/54]. Time: 0 [s] Finally [Tomography: 2/54]. Time: 0 [s] Finally [Tomography: 2/54]. Time: 0 [s] Finally [Tomography: 2/54]. Time: 0 [s] Finally [Tomography: 2/54]. Time: 0 [s] Finally [Tomography: 2/54]. Time: 0 [s] Finally [Tomography: 2/54]. Time: 0 [s] Finally [Tomography: 2/54]. Time: 0 [s] Finally [Tomography: 2/54]. Time: 0 [s] Finally [Tomography: 2/54]. Time: 0 [s] Detector: monitor_I=1.00744e-09 monitor_ERR=7.83379e-13 monitor_N=1.87622e+06 "monitor_1793332180.x_y" Finally [Tomography: 2/54]. Time: 0 [s] Finally [Tomography: 2/54]. Time: 0 [s] Finally [Tomography: 2/54]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 275 INFO: Output step into scan directory 2/55 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/55]. Time: 0 [s] Finally [Tomography: 2/55]. Time: 0 [s] Finally [Tomography: 2/55]. Time: 0 [s] Finally [Tomography: 2/55]. Time: 0 [s] Finally [Tomography: 2/55]. Time: 0 [s] Finally [Tomography: 2/55]. Time: 0 [s] Finally [Tomography: 2/55]. Time: 0 [s] Finally [Tomography: 2/55]. Time: 0 [s] Finally [Tomography: 2/55]. Time: 0 [s] Finally [Tomography: 2/55]. Time: 0 [s] Finally [Tomography: 2/55]. Time: 0 [s] Finally [Tomography: 2/55]. Time: 0 [s] Finally [Tomography: 2/55]. Time: 0 [s] Detector: monitor_I=1.00721e-09 monitor_ERR=7.83293e-13 monitor_N=1.87502e+06 "monitor_1793332181.x_y" Finally [Tomography: 2/55]. Time: 0 [s] Finally [Tomography: 2/55]. Time: 0 [s] Finally [Tomography: 2/55]. Time: 0 [s] Finally [Tomography: 2/55]. Time: 0 [s] Finally [Tomography: 2/55]. Time: 0 [s] Finally [Tomography: 2/55]. Time: 0 [s] Finally [Tomography: 2/55]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 280 INFO: Output step into scan directory 2/56 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Detector: monitor_I=1.00678e-09 monitor_ERR=7.83124e-13 monitor_N=1.8757e+06 "monitor_1793332181.x_y" Finally [Tomography: 2/56]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 285 INFO: Output step into scan directory 2/57 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] Detector: monitor_I=1.00452e-09 monitor_ERR=7.82243e-13 monitor_N=1.87526e+06 "monitor_1793332182.x_y" Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 290 INFO: Output step into scan directory 2/58 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Detector: monitor_I=1.0027e-09 monitor_ERR=7.81534e-13 monitor_N=1.87338e+06 "monitor_1793332183.x_y" Finally [Tomography: 2/58]. Time: 0 [s] Finally [Tomography: 2/58]. Time: 0 [s] Finally [Tomography: 2/58]. Time: 0 [s] Finally [Tomography: 2/58]. Time: 0 [s] Finally [Tomography: 2/58]. Time: 0 [s] Finally [Tomography: 2/58]. Time: 0 [s] Finally [Tomography: 2/58]. Time: 0 [s] Finally [Tomography: 2/58]. Time: 0 [s] Finally [Tomography: 2/58]. Time: 0 [s] Finally [Tomography: 2/58]. Time: 0 [s] Finally [Tomography: 2/58]. Time: 0 [s] Finally [Tomography: 2/58]. Time: 0 [s] Finally [Tomography: 2/58]. Time: 0 [s] Finally [Tomography: 2/58]. Time: 0 [s] Finally [Tomography: 2/58]. Time: 0 [s] Finally [Tomography: 2/58]. Time: 0 [s] Finally [Tomography: 2/58]. Time: 0 [s] Finally [Tomography: 2/58]. Time: 0 [s] Finally [Tomography: 2/58]. Time: 0 [s] Finally [Tomography: 2/58]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 295 INFO: Output step into scan directory 2/59 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] Detector: monitor_I=1.00177e-09 monitor_ERR=7.8117e-13 monitor_N=1.87317e+06 "monitor_1793332183.x_y" Finally [Tomography: 2/59]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 300 INFO: Output step into scan directory 2/60 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/60]. Time: 1 [s] Finally [Tomography: 2/60]. Time: 1 [s] Finally [Tomography: 2/60]. Time: 1 [s] Finally [Tomography: 2/60]. Time: 1 [s] Finally [Tomography: 2/60]. Time: 1 [s] Finally [Tomography: 2/60]. Time: 1 [s] Finally [Tomography: 2/60]. Time: 1 [s] Finally [Tomography: 2/60]. Time: 1 [s] Finally [Tomography: 2/60]. Time: 1 [s] Finally [Tomography: 2/60]. Time: 1 [s] Finally [Tomography: 2/60]. Time: 1 [s] Finally [Tomography: 2/60]. Time: 1 [s] Finally [Tomography: 2/60]. Time: 1 [s] Finally [Tomography: 2/60]. Time: 1 [s] Finally [Tomography: 2/60]. Time: 1 [s] Finally [Tomography: 2/60]. Time: 1 [s] Finally [Tomography: 2/60]. Time: 1 [s] Finally [Tomography: 2/60]. Time: 1 [s] Finally [Tomography: 2/60]. Time: 1 [s] Detector: monitor_I=1.00154e-09 monitor_ERR=7.8108e-13 monitor_N=1.87467e+06 "monitor_1793332184.x_y" Finally [Tomography: 2/60]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 305 INFO: Output step into scan directory 2/61 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] Detector: monitor_I=1.00141e-09 monitor_ERR=7.81027e-13 monitor_N=1.87348e+06 "monitor_1793332185.x_y" Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 310 INFO: Output step into scan directory 2/62 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/62]. Time: 0 [s] Finally [Tomography: 2/62]. Time: 0 [s] Finally [Tomography: 2/62]. Time: 0 [s] Finally [Tomography: 2/62]. Time: 0 [s] Finally [Tomography: 2/62]. Time: 0 [s] Finally [Tomography: 2/62]. Time: 0 [s] Finally [Tomography: 2/62]. Time: 0 [s] Finally [Tomography: 2/62]. Time: 0 [s] Finally [Tomography: 2/62]. Time: 0 [s] Finally [Tomography: 2/62]. Time: 0 [s] Finally [Tomography: 2/62]. Time: 0 [s] Finally [Tomography: 2/62]. Time: 0 [s] Finally [Tomography: 2/62]. Time: 0 [s] Finally [Tomography: 2/62]. Time: 0 [s] Finally [Tomography: 2/62]. Time: 0 [s] Finally [Tomography: 2/62]. Time: 0 [s] Finally [Tomography: 2/62]. Time: 0 [s] Finally [Tomography: 2/62]. Time: 0 [s] Detector: monitor_I=1.00154e-09 monitor_ERR=7.81077e-13 monitor_N=1.87374e+06 "monitor_1793332186.x_y" Finally [Tomography: 2/62]. Time: 0 [s] Finally [Tomography: 2/62]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 315 INFO: Output step into scan directory 2/63 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/63]. Time: 0 [s] Finally [Tomography: 2/63]. Time: 0 [s] Finally [Tomography: 2/63]. Time: 0 [s] Finally [Tomography: 2/63]. Time: 0 [s] Finally [Tomography: 2/63]. Time: 0 [s] Finally [Tomography: 2/63]. Time: 0 [s] Finally [Tomography: 2/63]. Time: 0 [s] Finally [Tomography: 2/63]. Time: 0 [s] Finally [Tomography: 2/63]. Time: 0 [s] Finally [Tomography: 2/63]. Time: 0 [s] Finally [Tomography: 2/63]. Time: 0 [s] Finally [Tomography: 2/63]. Time: 0 [s] Finally [Tomography: 2/63]. Time: 0 [s] Finally [Tomography: 2/63]. Time: 0 [s] Finally [Tomography: 2/63]. Time: 0 [s] Finally [Tomography: 2/63]. Time: 0 [s] Finally [Tomography: 2/63]. Time: 0 [s] Finally [Tomography: 2/63]. Time: 0 [s] Finally [Tomography: 2/63]. Time: 0 [s] Detector: monitor_I=1.00217e-09 monitor_ERR=7.81325e-13 monitor_N=1.87523e+06 "monitor_1793332187.x_y" Finally [Tomography: 2/63]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 320 INFO: Output step into scan directory 2/64 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] Detector: monitor_I=1.00217e-09 monitor_ERR=7.81325e-13 monitor_N=1.87501e+06 "monitor_1793332187.x_y" Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 325 INFO: Output step into scan directory 2/65 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 [Tomography] Initialize [Tomography] Initialize Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/65]. Time: 0 [s] Finally [Tomography: 2/65]. Time: 0 [s] Finally [Tomography: 2/65]. Time: 0 [s] Finally [Tomography: 2/65]. Time: 0 [s] Finally [Tomography: 2/65]. Time: 0 [s] Finally [Tomography: 2/65]. Time: 0 [s] Finally [Tomography: 2/65]. Time: 0 [s] Finally [Tomography: 2/65]. Time: 0 [s] Finally [Tomography: 2/65]. Time: 0 [s] Finally [Tomography: 2/65]. Time: 0 [s] Finally [Tomography: 2/65]. Time: 0 [s] Finally [Tomography: 2/65]. Time: 0 [s] Finally [Tomography: 2/65]. Time: 0 [s] Finally [Tomography: 2/65]. Time: 0 [s] Detector: monitor_I=1.00137e-09 monitor_ERR=7.81014e-13 monitor_N=1.87499e+06 "monitor_1793332188.x_y" Finally [Tomography: 2/65]. Time: 0 [s] Finally [Tomography: 2/65]. Time: 0 [s] Finally [Tomography: 2/65]. Time: 0 [s] Finally [Tomography: 2/65]. Time: 0 [s] Finally [Tomography: 2/65]. Time: 0 [s] Finally [Tomography: 2/65]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 330 INFO: Output step into scan directory 2/66 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] [Tomography] Initialize *** TRACE end *** Save [Tomography] Finally [Tomography: 2/66]. Time: 0 [s] Finally [Tomography: 2/66]. Time: 0 [s] Finally [Tomography: 2/66]. Time: 0 [s] Finally [Tomography: 2/66]. Time: 0 [s] Finally [Tomography: 2/66]. Time: 0 [s] Finally [Tomography: 2/66]. Time: 0 [s] Finally [Tomography: 2/66]. Time: 0 [s] Finally [Tomography: 2/66]. Time: 0 [s] Finally [Tomography: 2/66]. Time: 0 [s] Finally [Tomography: 2/66]. Time: 0 [s] Finally [Tomography: 2/66]. Time: 0 [s] Finally [Tomography: 2/66]. Time: 0 [s] Finally [Tomography: 2/66]. Time: 0 [s] Finally [Tomography: 2/66]. Time: 0 [s] Detector: monitor_I=1.00186e-09 monitor_ERR=7.81205e-13 monitor_N=1.87544e+06 "monitor_1793332189.x_y" Finally [Tomography: 2/66]. Time: 0 [s] Finally [Tomography: 2/66]. Time: 0 [s] Finally [Tomography: 2/66]. Time: 0 [s] Finally [Tomography: 2/66]. Time: 0 [s] Finally [Tomography: 2/66]. Time: 0 [s] Finally [Tomography: 2/66]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 335 INFO: Output step into scan directory 2/67 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] Detector: monitor_I=1.00366e-09 monitor_ERR=7.81912e-13 monitor_N=1.87526e+06 "monitor_1793332189.x_y" Finally [Tomography: 2/67]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 340 INFO: Output step into scan directory 2/68 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/68]. Time: 0 [s] Finally [Tomography: 2/68]. Time: 0 [s] Finally [Tomography: 2/68]. Time: 0 [s] Finally [Tomography: 2/68]. Time: 0 [s] Finally [Tomography: 2/68]. Time: 0 [s] Finally [Tomography: 2/68]. Time: 0 [s] Finally [Tomography: 2/68]. Time: 0 [s] Finally [Tomography: 2/68]. Time: 0 [s] Finally [Tomography: 2/68]. Time: 0 [s] Finally [Tomography: 2/68]. Time: 0 [s] Finally [Tomography: 2/68]. Time: 0 [s] Finally [Tomography: 2/68]. Time: 0 [s] Finally [Tomography: 2/68]. Time: 0 [s] Finally [Tomography: 2/68]. Time: 0 [s] Finally [Tomography: 2/68]. Time: 0 [s] Finally [Tomography: 2/68]. Time: 0 [s] Finally [Tomography: 2/68]. Time: 0 [s] Finally [Tomography: 2/68]. Time: 0 [s] Detector: monitor_I=1.00564e-09 monitor_ERR=7.82682e-13 monitor_N=1.87619e+06 "monitor_1793332190.x_y" Finally [Tomography: 2/68]. Time: 0 [s] Finally [Tomography: 2/68]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 345 INFO: Output step into scan directory 2/69 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/69]. Time: 0 [s] Finally [Tomography: 2/69]. Time: 0 [s] Finally [Tomography: 2/69]. Time: 0 [s] Finally [Tomography: 2/69]. Time: 0 [s] Finally [Tomography: 2/69]. Time: 0 [s] Finally [Tomography: 2/69]. Time: 0 [s] Finally [Tomography: 2/69]. Time: 0 [s] Finally [Tomography: 2/69]. Time: 0 [s] Finally [Tomography: 2/69]. Time: 0 [s] Finally [Tomography: 2/69]. Time: 0 [s] Finally [Tomography: 2/69]. Time: 0 [s] Finally [Tomography: 2/69]. Time: 0 [s] Finally [Tomography: 2/69]. Time: 0 [s] Finally [Tomography: 2/69]. Time: 0 [s] Finally [Tomography: 2/69]. Time: 0 [s] Finally [Tomography: 2/69]. Time: 0 [s] Finally [Tomography: 2/69]. Time: 0 [s] Finally [Tomography: 2/69]. Time: 0 [s] Detector: monitor_I=1.00823e-09 monitor_ERR=7.83694e-13 monitor_N=1.87477e+06 "monitor_1793332191.x_y" Finally [Tomography: 2/69]. Time: 0 [s] Finally [Tomography: 2/69]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 350 INFO: Output step into scan directory 2/70 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] Detector: monitor_I=1.01405e-09 monitor_ERR=7.85956e-13 monitor_N=1.87568e+06 "monitor_1793332191.x_y" Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 355 INFO: Output step into scan directory 2/71 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=1 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/71]. Time: 0 [s] Finally [Tomography: 2/71]. Time: 0 [s] Finally [Tomography: 2/71]. Time: 0 [s] Finally [Tomography: 2/71]. Time: 0 [s] Finally [Tomography: 2/71]. Time: 0 [s] Finally [Tomography: 2/71]. Time: 0 [s] Finally [Tomography: 2/71]. Time: 0 [s] Finally [Tomography: 2/71]. Time: 0 [s] Finally [Tomography: 2/71]. Time: 0 [s] Finally [Tomography: 2/71]. Time: 0 [s] Finally [Tomography: 2/71]. Time: 0 [s] Finally [Tomography: 2/71]. Time: 0 [s] Finally [Tomography: 2/71]. Time: 0 [s] Finally [Tomography: 2/71]. Time: 0 [s] Finally [Tomography: 2/71]. Time: 0 [s] Finally [Tomography: 2/71]. Time: 0 [s] Finally [Tomography: 2/71]. Time: 0 [s] Finally [Tomography: 2/71]. Time: 0 [s] Finally [Tomography: 2/71]. Time: 0 [s] Detector: monitor_I=1.02409e-09 monitor_ERR=7.89844e-13 monitor_N=1.87587e+06 "monitor_1793332192.x_y" Finally [Tomography: 2/71]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: Scan complete: all 72 point(s) succeeded. INFO: Placing instr file copy Tomography.instr in dataset 2 INFO: Placing generated c-code copy Tomography.c in dataset 2