INFO: Using directory: "2" INFO: Using existing c-file: ./Tomography.c INFO: Using existing binary: ./Tomography.out INFO: === INFO: Running Scanner, result file is "2/mccode.dat" LinearInterval from N=72 and intervals={'omega': ['0', '355']} INFO: Scan base seed: 1000 INFO: omega: 0 INFO: Output step into scan directory 2/0 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/0]. Time: 1 [s] Finally [Tomography: 2/0]. Time: 1 [s] Finally [Tomography: 2/0]. Time: 1 [s] Finally [Tomography: 2/0]. Time: 1 [s] Finally [Tomography: 2/0]. Time: 1 [s] Finally [Tomography: 2/0]. Time: 1 [s] Finally [Tomography: 2/0]. Time: 1 [s] Finally [Tomography: 2/0]. Time: 1 [s] Finally [Tomography: 2/0]. Time: 1 [s] Finally [Tomography: 2/0]. Time: 1 [s] Finally [Tomography: 2/0]. Time: 1 [s] Finally [Tomography: 2/0]. Time: 1 [s] Finally [Tomography: 2/0]. Time: 1 [s] Finally [Tomography: 2/0]. Time: 1 [s] Finally [Tomography: 2/0]. Time: 1 [s] Finally [Tomography: 2/0]. Time: 1 [s] Finally [Tomography: 2/0]. Time: 1 [s] Finally [Tomography: 2/0]. Time: 1 [s] Finally [Tomography: 2/0]. Time: 1 [s] Detector: monitor_I=9.41519e-10 monitor_ERR=1.51474e-12 monitor_N=468914 "monitor_1791616095.x_y" Finally [Tomography: 2/0]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write headers INFO: Wrote headers INFO: Write step detectors line into 2/mccode.dat INFO: omega: 5 INFO: Output step into scan directory 2/1 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/1]. Time: 1 [s] Finally [Tomography: 2/1]. Time: 1 [s] Finally [Tomography: 2/1]. Time: 1 [s] Finally [Tomography: 2/1]. Time: 1 [s] Finally [Tomography: 2/1]. Time: 1 [s] Finally [Tomography: 2/1]. Time: 1 [s] Finally [Tomography: 2/1]. Time: 1 [s] Finally [Tomography: 2/1]. Time: 1 [s] Finally [Tomography: 2/1]. Time: 1 [s] Finally [Tomography: 2/1]. Time: 1 [s] Finally [Tomography: 2/1]. Time: 1 [s] Finally [Tomography: 2/1]. Time: 1 [s] Finally [Tomography: 2/1]. Time: 1 [s] Finally [Tomography: 2/1]. Time: 1 [s] Finally [Tomography: 2/1]. Time: 1 [s] Finally [Tomography: 2/1]. Time: 1 [s] Finally [Tomography: 2/1]. Time: 1 [s] Finally [Tomography: 2/1]. Time: 1 [s] Detector: monitor_I=9.28126e-10 monitor_ERR=1.50392e-12 monitor_N=469105 "monitor_1791616096.x_y" Finally [Tomography: 2/1]. Time: 1 [s] Finally [Tomography: 2/1]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 10 INFO: Output step into scan directory 2/2 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] Detector: monitor_I=9.14228e-10 monitor_ERR=1.49262e-12 monitor_N=468647 "monitor_1791616098.x_y" Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] Finally [Tomography: 2/2]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 15 INFO: Output step into scan directory 2/3 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/3]. Time: 1 [s] Finally [Tomography: 2/3]. Time: 1 [s] Finally [Tomography: 2/3]. Time: 1 [s] Finally [Tomography: 2/3]. Time: 1 [s] Finally [Tomography: 2/3]. Time: 1 [s] Finally [Tomography: 2/3]. Time: 1 [s] Finally [Tomography: 2/3]. Time: 1 [s] Finally [Tomography: 2/3]. Time: 1 [s] Finally [Tomography: 2/3]. Time: 1 [s] Finally [Tomography: 2/3]. Time: 1 [s] Detector: monitor_I=9.03698e-10 monitor_ERR=1.484e-12 monitor_N=469535 "monitor_1791616099.x_y" Finally [Tomography: 2/3]. Time: 1 [s] Finally [Tomography: 2/3]. Time: 1 [s] Finally [Tomography: 2/3]. Time: 1 [s] Finally [Tomography: 2/3]. Time: 1 [s] Finally [Tomography: 2/3]. Time: 1 [s] Finally [Tomography: 2/3]. Time: 1 [s] Finally [Tomography: 2/3]. Time: 1 [s] Finally [Tomography: 2/3]. Time: 1 [s] Finally [Tomography: 2/3]. Time: 1 [s] Finally [Tomography: 2/3]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 20 INFO: Output step into scan directory 2/4 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/4]. Time: 1 [s] Finally [Tomography: 2/4]. Time: 1 [s] Finally [Tomography: 2/4]. Time: 1 [s] Finally [Tomography: 2/4]. Time: 1 [s] Finally [Tomography: 2/4]. Time: 1 [s] Finally [Tomography: 2/4]. Time: 1 [s] Finally [Tomography: 2/4]. Time: 1 [s] Finally [Tomography: 2/4]. Time: 1 [s] Finally [Tomography: 2/4]. Time: 1 [s] Finally [Tomography: 2/4]. Time: 1 [s] Finally [Tomography: 2/4]. Time: 1 [s] Finally [Tomography: 2/4]. Time: 1 [s] Finally [Tomography: 2/4]. Time: 1 [s] Finally [Tomography: 2/4]. Time: 1 [s] Finally [Tomography: 2/4]. Time: 1 [s] Detector: monitor_I=8.91942e-10 monitor_ERR=1.47432e-12 monitor_N=468499 "monitor_1791616101.x_y" Finally [Tomography: 2/4]. Time: 1 [s] Finally [Tomography: 2/4]. Time: 1 [s] Finally [Tomography: 2/4]. Time: 1 [s] Finally [Tomography: 2/4]. Time: 1 [s] Finally [Tomography: 2/4]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 25 INFO: Output step into scan directory 2/5 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] Detector: monitor_I=8.87519e-10 monitor_ERR=1.47066e-12 monitor_N=468873 "monitor_1791616102.x_y" Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] Finally [Tomography: 2/5]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 30 INFO: Output step into scan directory 2/6 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/6]. Time: 2 [s] Finally [Tomography: 2/6]. Time: 2 [s] Finally [Tomography: 2/6]. Time: 2 [s] Finally [Tomography: 2/6]. Time: 2 [s] Finally [Tomography: 2/6]. Time: 2 [s] Finally [Tomography: 2/6]. Time: 2 [s] Finally [Tomography: 2/6]. Time: 2 [s] Finally [Tomography: 2/6]. Time: 2 [s] Finally [Tomography: 2/6]. Time: 2 [s] Finally [Tomography: 2/6]. Time: 2 [s] Finally [Tomography: 2/6]. Time: 2 [s] Finally [Tomography: 2/6]. Time: 2 [s] Finally [Tomography: 2/6]. Time: 2 [s] Finally [Tomography: 2/6]. Time: 2 [s] Finally [Tomography: 2/6]. Time: 2 [s] Finally [Tomography: 2/6]. Time: 2 [s] Finally [Tomography: 2/6]. Time: 2 [s] Finally [Tomography: 2/6]. Time: 2 [s] Finally [Tomography: 2/6]. Time: 2 [s] Detector: monitor_I=8.86398e-10 monitor_ERR=1.46973e-12 monitor_N=468500 "monitor_1791616103.x_y" Finally [Tomography: 2/6]. Time: 2 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 35 INFO: Output step into scan directory 2/7 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] Detector: monitor_I=8.87658e-10 monitor_ERR=1.47077e-12 monitor_N=469083 "monitor_1791616105.x_y" Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] Finally [Tomography: 2/7]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 40 INFO: Output step into scan directory 2/8 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/8]. Time: 1 [s] Finally [Tomography: 2/8]. Time: 1 [s] Finally [Tomography: 2/8]. Time: 1 [s] Finally [Tomography: 2/8]. Time: 1 [s] Finally [Tomography: 2/8]. Time: 1 [s] Finally [Tomography: 2/8]. Time: 1 [s] Finally [Tomography: 2/8]. Time: 1 [s] Finally [Tomography: 2/8]. Time: 1 [s] Finally [Tomography: 2/8]. Time: 1 [s] Finally [Tomography: 2/8]. Time: 1 [s] Finally [Tomography: 2/8]. Time: 1 [s] Finally [Tomography: 2/8]. Time: 1 [s] Finally [Tomography: 2/8]. Time: 1 [s] Finally [Tomography: 2/8]. Time: 1 [s] Finally [Tomography: 2/8]. Time: 1 [s] Finally [Tomography: 2/8]. Time: 1 [s] Detector: monitor_I=8.89535e-10 monitor_ERR=1.47233e-12 monitor_N=469446 "monitor_1791616106.x_y" Finally [Tomography: 2/8]. Time: 1 [s] Finally [Tomography: 2/8]. Time: 1 [s] Finally [Tomography: 2/8]. Time: 1 [s] Finally [Tomography: 2/8]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 45 INFO: Output step into scan directory 2/9 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] Detector: monitor_I=8.83157e-10 monitor_ERR=1.46704e-12 monitor_N=467729 "monitor_1791616108.x_y" Finally [Tomography: 2/9]. Time: 1 [s] Finally [Tomography: 2/9]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 50 INFO: Output step into scan directory 2/10 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Finally [Tomography: 2/10]. Time: 1 [s] Detector: monitor_I=8.81887e-10 monitor_ERR=1.46598e-12 monitor_N=468605 "monitor_1791616109.x_y" Finally [Tomography: 2/10]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 55 INFO: Output step into scan directory 2/11 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/11]. Time: 1 [s] Finally [Tomography: 2/11]. Time: 1 [s] Finally [Tomography: 2/11]. Time: 1 [s] Finally [Tomography: 2/11]. Time: 1 [s] Finally [Tomography: 2/11]. Time: 1 [s] Finally [Tomography: 2/11]. Time: 1 [s] Finally [Tomography: 2/11]. Time: 1 [s] Finally [Tomography: 2/11]. Time: 1 [s] Finally [Tomography: 2/11]. Time: 1 [s] Finally [Tomography: 2/11]. Time: 1 [s] Finally [Tomography: 2/11]. Time: 1 [s] Finally [Tomography: 2/11]. Time: 1 [s] Finally [Tomography: 2/11]. Time: 1 [s] Finally [Tomography: 2/11]. Time: 1 [s] Finally [Tomography: 2/11]. Time: 1 [s] Finally [Tomography: 2/11]. Time: 1 [s] Finally [Tomography: 2/11]. Time: 1 [s] Detector: monitor_I=8.81147e-10 monitor_ERR=1.46537e-12 monitor_N=468745 "monitor_1791616110.x_y" Finally [Tomography: 2/11]. Time: 1 [s] Finally [Tomography: 2/11]. Time: 1 [s] Finally [Tomography: 2/11]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 60 INFO: Output step into scan directory 2/12 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Finally [Tomography: 2/12]. Time: 1 [s] Detector: monitor_I=8.82002e-10 monitor_ERR=1.46608e-12 monitor_N=468555 "monitor_1791616112.x_y" Finally [Tomography: 2/12]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 65 INFO: Output step into scan directory 2/13 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] Detector: monitor_I=8.8391e-10 monitor_ERR=1.46766e-12 monitor_N=468046 "monitor_1791616113.x_y" Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] Finally [Tomography: 2/13]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 70 INFO: Output step into scan directory 2/14 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] Detector: monitor_I=8.87804e-10 monitor_ERR=1.47089e-12 monitor_N=467938 "monitor_1791616114.x_y" Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] Finally [Tomography: 2/14]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 75 INFO: Output step into scan directory 2/15 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off [Tomography] Initialize [Tomography] Initialize Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/15]. Time: 1 [s] Finally [Tomography: 2/15]. Time: 1 [s] Finally [Tomography: 2/15]. Time: 1 [s] Finally [Tomography: 2/15]. Time: 1 [s] Finally [Tomography: 2/15]. Time: 1 [s] Finally [Tomography: 2/15]. Time: 1 [s] Finally [Tomography: 2/15]. Time: 1 [s] Finally [Tomography: 2/15]. Time: 1 [s] Finally [Tomography: 2/15]. Time: 1 [s] Finally [Tomography: 2/15]. Time: 1 [s] Finally [Tomography: 2/15]. Time: 1 [s] Finally [Tomography: 2/15]. Time: 1 [s] Finally [Tomography: 2/15]. Time: 1 [s] Finally [Tomography: 2/15]. Time: 1 [s] Finally [Tomography: 2/15]. Time: 1 [s] Finally [Tomography: 2/15]. Time: 1 [s] Finally [Tomography: 2/15]. Time: 1 [s] Finally [Tomography: 2/15]. Time: 1 [s] Finally [Tomography: 2/15]. Time: 1 [s] Detector: monitor_I=8.9251e-10 monitor_ERR=1.47479e-12 monitor_N=468694 "monitor_1791616115.x_y" Finally [Tomography: 2/15]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 80 INFO: Output step into scan directory 2/16 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/16]. Time: 1 [s] Finally [Tomography: 2/16]. Time: 1 [s] Finally [Tomography: 2/16]. Time: 1 [s] Finally [Tomography: 2/16]. Time: 1 [s] Finally [Tomography: 2/16]. Time: 1 [s] Finally [Tomography: 2/16]. Time: 1 [s] Finally [Tomography: 2/16]. Time: 1 [s] Finally [Tomography: 2/16]. Time: 1 [s] Finally [Tomography: 2/16]. Time: 1 [s] Finally [Tomography: 2/16]. Time: 1 [s] Finally [Tomography: 2/16]. Time: 1 [s] Finally [Tomography: 2/16]. Time: 1 [s] Detector: monitor_I=9.00995e-10 monitor_ERR=1.48178e-12 monitor_N=469210 "monitor_1791616116.x_y" Finally [Tomography: 2/16]. Time: 1 [s] Finally [Tomography: 2/16]. Time: 1 [s] Finally [Tomography: 2/16]. Time: 1 [s] Finally [Tomography: 2/16]. Time: 1 [s] Finally [Tomography: 2/16]. Time: 1 [s] Finally [Tomography: 2/16]. Time: 1 [s] Finally [Tomography: 2/16]. Time: 1 [s] Finally [Tomography: 2/16]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 85 INFO: Output step into scan directory 2/17 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Detector: monitor_I=9.11023e-10 monitor_ERR=1.49e-12 monitor_N=468479 "monitor_1791616118.x_y" Finally [Tomography: 2/17]. Time: 1 [s] Finally [Tomography: 2/17]. Time: 1 [s] Finally [Tomography: 2/17]. Time: 1 [s] Finally [Tomography: 2/17]. Time: 1 [s] Finally [Tomography: 2/17]. Time: 1 [s] Finally [Tomography: 2/17]. Time: 1 [s] Finally [Tomography: 2/17]. Time: 1 [s] Finally [Tomography: 2/17]. Time: 1 [s] Finally [Tomography: 2/17]. Time: 1 [s] Finally [Tomography: 2/17]. Time: 1 [s] Finally [Tomography: 2/17]. Time: 1 [s] Finally [Tomography: 2/17]. Time: 1 [s] Finally [Tomography: 2/17]. Time: 1 [s] Finally [Tomography: 2/17]. Time: 1 [s] Finally [Tomography: 2/17]. Time: 1 [s] Finally [Tomography: 2/17]. Time: 1 [s] Finally [Tomography: 2/17]. Time: 1 [s] Finally [Tomography: 2/17]. Time: 1 [s] Finally [Tomography: 2/17]. Time: 1 [s] Finally [Tomography: 2/17]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 90 INFO: Output step into scan directory 2/18 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] Detector: monitor_I=9.22789e-10 monitor_ERR=1.49959e-12 monitor_N=468260 "monitor_1791616119.x_y" Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] Finally [Tomography: 2/18]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 95 INFO: Output step into scan directory 2/19 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] Finally [Tomography: 2/19]. Time: 1 [s] Detector: monitor_I=9.10075e-10 monitor_ERR=1.48923e-12 monitor_N=468518 "monitor_1791616120.x_y" Finally [Tomography: 2/19]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 100 INFO: Output step into scan directory 2/20 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/20]. Time: 1 [s] Finally [Tomography: 2/20]. Time: 1 [s] Finally [Tomography: 2/20]. Time: 1 [s] Finally [Tomography: 2/20]. Time: 1 [s] Finally [Tomography: 2/20]. Time: 1 [s] Finally [Tomography: 2/20]. Time: 1 [s] Finally [Tomography: 2/20]. Time: 1 [s] Finally [Tomography: 2/20]. Time: 1 [s] Finally [Tomography: 2/20]. Time: 1 [s] Finally [Tomography: 2/20]. Time: 1 [s] Finally [Tomography: 2/20]. Time: 1 [s] Finally [Tomography: 2/20]. Time: 1 [s] Finally [Tomography: 2/20]. Time: 1 [s] Finally [Tomography: 2/20]. Time: 1 [s] Finally [Tomography: 2/20]. Time: 1 [s] Finally [Tomography: 2/20]. Time: 1 [s] Finally [Tomography: 2/20]. Time: 1 [s] Finally [Tomography: 2/20]. Time: 1 [s] Finally [Tomography: 2/20]. Time: 1 [s] Detector: monitor_I=9.01293e-10 monitor_ERR=1.48202e-12 monitor_N=469227 "monitor_1791616121.x_y" Finally [Tomography: 2/20]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 105 INFO: Output step into scan directory 2/21 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] Finally [Tomography: 2/21]. Time: 1 [s] Detector: monitor_I=8.91002e-10 monitor_ERR=1.47354e-12 monitor_N=468144 "monitor_1791616122.x_y" Finally [Tomography: 2/21]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 110 INFO: Output step into scan directory 2/22 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/22]. Time: 1 [s] Finally [Tomography: 2/22]. Time: 1 [s] Finally [Tomography: 2/22]. Time: 1 [s] Finally [Tomography: 2/22]. Time: 1 [s] Finally [Tomography: 2/22]. Time: 1 [s] Finally [Tomography: 2/22]. Time: 1 [s] Finally [Tomography: 2/22]. Time: 1 [s] Finally [Tomography: 2/22]. Time: 1 [s] Finally [Tomography: 2/22]. Time: 1 [s] Finally [Tomography: 2/22]. Time: 1 [s] Finally [Tomography: 2/22]. Time: 1 [s] Finally [Tomography: 2/22]. Time: 1 [s] Finally [Tomography: 2/22]. Time: 1 [s] Finally [Tomography: 2/22]. Time: 1 [s] Finally [Tomography: 2/22]. Time: 1 [s] Finally [Tomography: 2/22]. Time: 1 [s] Finally [Tomography: 2/22]. Time: 1 [s] Finally [Tomography: 2/22]. Time: 1 [s] Finally [Tomography: 2/22]. Time: 1 [s] Detector: monitor_I=8.87193e-10 monitor_ERR=1.47039e-12 monitor_N=468833 "monitor_1791616123.x_y" Finally [Tomography: 2/22]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 115 INFO: Output step into scan directory 2/23 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] Finally [Tomography: 2/23]. Time: 0 [s] Detector: monitor_I=8.84624e-10 monitor_ERR=1.46826e-12 monitor_N=468224 "monitor_1791616125.x_y" Finally [Tomography: 2/23]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 120 INFO: Output step into scan directory 2/24 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/24]. Time: 0 [s] Finally [Tomography: 2/24]. Time: 0 [s] Finally [Tomography: 2/24]. Time: 0 [s] Finally [Tomography: 2/24]. Time: 0 [s] Finally [Tomography: 2/24]. Time: 0 [s] Finally [Tomography: 2/24]. Time: 0 [s] Finally [Tomography: 2/24]. Time: 0 [s] Finally [Tomography: 2/24]. Time: 0 [s] Finally [Tomography: 2/24]. Time: 0 [s] Finally [Tomography: 2/24]. Time: 0 [s] Finally [Tomography: 2/24]. Time: 0 [s] Finally [Tomography: 2/24]. Time: 0 [s] Finally [Tomography: 2/24]. Time: 0 [s] Finally [Tomography: 2/24]. Time: 0 [s] Finally [Tomography: 2/24]. Time: 0 [s] Finally [Tomography: 2/24]. Time: 0 [s] Finally [Tomography: 2/24]. Time: 0 [s] Finally [Tomography: 2/24]. Time: 0 [s] Finally [Tomography: 2/24]. Time: 0 [s] Detector: monitor_I=8.80857e-10 monitor_ERR=1.46513e-12 monitor_N=468225 "monitor_1791616126.x_y" Finally [Tomography: 2/24]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 125 INFO: Output step into scan directory 2/25 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] Finally [Tomography: 2/25]. Time: 1 [s] Detector: monitor_I=8.81322e-10 monitor_ERR=1.46551e-12 monitor_N=467988 "monitor_1791616127.x_y" Finally [Tomography: 2/25]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 130 INFO: Output step into scan directory 2/26 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] Finally [Tomography: 2/26]. Time: 1 [s] Detector: monitor_I=8.83123e-10 monitor_ERR=1.46701e-12 monitor_N=468552 "monitor_1791616128.x_y" Finally [Tomography: 2/26]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 135 INFO: Output step into scan directory 2/27 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/27]. Time: 1 [s] Finally [Tomography: 2/27]. Time: 1 [s] Finally [Tomography: 2/27]. Time: 1 [s] Finally [Tomography: 2/27]. Time: 1 [s] Finally [Tomography: 2/27]. Time: 1 [s] Finally [Tomography: 2/27]. Time: 1 [s] Finally [Tomography: 2/27]. Time: 1 [s] Finally [Tomography: 2/27]. Time: 1 [s] Finally [Tomography: 2/27]. Time: 1 [s] Finally [Tomography: 2/27]. Time: 1 [s] Finally [Tomography: 2/27]. Time: 1 [s] Finally [Tomography: 2/27]. Time: 1 [s] Finally [Tomography: 2/27]. Time: 1 [s] Detector: monitor_I=8.88804e-10 monitor_ERR=1.47172e-12 monitor_N=468873 "monitor_1791616129.x_y" Finally [Tomography: 2/27]. Time: 1 [s] Finally [Tomography: 2/27]. Time: 1 [s] Finally [Tomography: 2/27]. Time: 1 [s] Finally [Tomography: 2/27]. Time: 1 [s] Finally [Tomography: 2/27]. Time: 1 [s] Finally [Tomography: 2/27]. Time: 1 [s] Finally [Tomography: 2/27]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 140 INFO: Output step into scan directory 2/28 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/28]. Time: 1 [s] Finally [Tomography: 2/28]. Time: 1 [s] Finally [Tomography: 2/28]. Time: 1 [s] Finally [Tomography: 2/28]. Time: 1 [s] Finally [Tomography: 2/28]. Time: 1 [s] Finally [Tomography: 2/28]. Time: 1 [s] Finally [Tomography: 2/28]. Time: 1 [s] Finally [Tomography: 2/28]. Time: 1 [s] Finally [Tomography: 2/28]. Time: 1 [s] Finally [Tomography: 2/28]. Time: 1 [s] Finally [Tomography: 2/28]. Time: 1 [s] Finally [Tomography: 2/28]. Time: 1 [s] Finally [Tomography: 2/28]. Time: 1 [s] Finally [Tomography: 2/28]. Time: 1 [s] Finally [Tomography: 2/28]. Time: 1 [s] Finally [Tomography: 2/28]. Time: 1 [s] Finally [Tomography: 2/28]. Time: 1 [s] Finally [Tomography: 2/28]. Time: 1 [s] Finally [Tomography: 2/28]. Time: 1 [s] Detector: monitor_I=8.90651e-10 monitor_ERR=1.47325e-12 monitor_N=469035 "monitor_1791616130.x_y" Finally [Tomography: 2/28]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 145 INFO: Output step into scan directory 2/29 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] Detector: monitor_I=8.88653e-10 monitor_ERR=1.47159e-12 monitor_N=468770 "monitor_1791616131.x_y" Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] Finally [Tomography: 2/29]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 150 INFO: Output step into scan directory 2/30 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] Detector: monitor_I=8.89522e-10 monitor_ERR=1.47232e-12 monitor_N=469220 "monitor_1791616133.x_y" Finally [Tomography: 2/30]. Time: 1 [s] Finally [Tomography: 2/30]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 155 INFO: Output step into scan directory 2/31 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/31]. Time: 1 [s] Finally [Tomography: 2/31]. Time: 1 [s] Finally [Tomography: 2/31]. Time: 1 [s] Finally [Tomography: 2/31]. Time: 1 [s] Finally [Tomography: 2/31]. Time: 1 [s] Finally [Tomography: 2/31]. Time: 1 [s] Finally [Tomography: 2/31]. Time: 1 [s] Finally [Tomography: 2/31]. Time: 1 [s] Finally [Tomography: 2/31]. Time: 1 [s] Finally [Tomography: 2/31]. Time: 1 [s] Finally [Tomography: 2/31]. Time: 1 [s] Finally [Tomography: 2/31]. Time: 1 [s] Finally [Tomography: 2/31]. Time: 1 [s] Finally [Tomography: 2/31]. Time: 1 [s] Finally [Tomography: 2/31]. Time: 1 [s] Finally [Tomography: 2/31]. Time: 1 [s] Finally [Tomography: 2/31]. Time: 1 [s] Finally [Tomography: 2/31]. Time: 1 [s] Finally [Tomography: 2/31]. Time: 1 [s] Detector: monitor_I=8.87605e-10 monitor_ERR=1.47073e-12 monitor_N=468316 "monitor_1791616134.x_y" Finally [Tomography: 2/31]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 160 INFO: Output step into scan directory 2/32 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/32]. Time: 1 [s] Finally [Tomography: 2/32]. Time: 1 [s] Finally [Tomography: 2/32]. Time: 1 [s] Finally [Tomography: 2/32]. Time: 1 [s] Finally [Tomography: 2/32]. Time: 1 [s] Finally [Tomography: 2/32]. Time: 1 [s] Finally [Tomography: 2/32]. Time: 1 [s] Finally [Tomography: 2/32]. Time: 1 [s] Finally [Tomography: 2/32]. Time: 1 [s] Finally [Tomography: 2/32]. Time: 1 [s] Finally [Tomography: 2/32]. Time: 1 [s] Finally [Tomography: 2/32]. Time: 1 [s] Finally [Tomography: 2/32]. Time: 1 [s] Finally [Tomography: 2/32]. Time: 1 [s] Finally [Tomography: 2/32]. Time: 1 [s] Finally [Tomography: 2/32]. Time: 1 [s] Detector: monitor_I=8.95222e-10 monitor_ERR=1.47702e-12 monitor_N=468800 "monitor_1791616135.x_y" Finally [Tomography: 2/32]. Time: 1 [s] Finally [Tomography: 2/32]. Time: 1 [s] Finally [Tomography: 2/32]. Time: 1 [s] Finally [Tomography: 2/32]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 165 INFO: Output step into scan directory 2/33 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/33]. Time: 2 [s] Finally [Tomography: 2/33]. Time: 2 [s] Finally [Tomography: 2/33]. Time: 2 [s] Finally [Tomography: 2/33]. Time: 2 [s] Finally [Tomography: 2/33]. Time: 2 [s] Finally [Tomography: 2/33]. Time: 2 [s] Finally [Tomography: 2/33]. Time: 2 [s] Finally [Tomography: 2/33]. Time: 2 [s] Finally [Tomography: 2/33]. Time: 2 [s] Finally [Tomography: 2/33]. Time: 2 [s] Finally [Tomography: 2/33]. Time: 2 [s] Finally [Tomography: 2/33]. Time: 2 [s] Finally [Tomography: 2/33]. Time: 2 [s] Finally [Tomography: 2/33]. Time: 2 [s] Finally [Tomography: 2/33]. Time: 2 [s] Finally [Tomography: 2/33]. Time: 2 [s] Finally [Tomography: 2/33]. Time: 2 [s] Detector: monitor_I=9.02577e-10 monitor_ERR=1.48308e-12 monitor_N=469084 "monitor_1791616136.x_y" Finally [Tomography: 2/33]. Time: 2 [s] Finally [Tomography: 2/33]. Time: 2 [s] Finally [Tomography: 2/33]. Time: 2 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 170 INFO: Output step into scan directory 2/34 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off [Tomography] Initialize Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Finally [Tomography: 2/34]. Time: 1 [s] Detector: monitor_I=9.14272e-10 monitor_ERR=1.49266e-12 monitor_N=467894 "monitor_1791616138.x_y" Finally [Tomography: 2/34]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 175 INFO: Output step into scan directory 2/35 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/35]. Time: 1 [s] Finally [Tomography: 2/35]. Time: 1 [s] Finally [Tomography: 2/35]. Time: 1 [s] Finally [Tomography: 2/35]. Time: 1 [s] Finally [Tomography: 2/35]. Time: 1 [s] Finally [Tomography: 2/35]. Time: 1 [s] Finally [Tomography: 2/35]. Time: 1 [s] Finally [Tomography: 2/35]. Time: 1 [s] Finally [Tomography: 2/35]. Time: 1 [s] Finally [Tomography: 2/35]. Time: 1 [s] Finally [Tomography: 2/35]. Time: 1 [s] Finally [Tomography: 2/35]. Time: 1 [s] Finally [Tomography: 2/35]. Time: 1 [s] Finally [Tomography: 2/35]. Time: 1 [s] Finally [Tomography: 2/35]. Time: 1 [s] Finally [Tomography: 2/35]. Time: 1 [s] Finally [Tomography: 2/35]. Time: 1 [s] Detector: monitor_I=9.26327e-10 monitor_ERR=1.50247e-12 monitor_N=467628 "monitor_1791616139.x_y" Finally [Tomography: 2/35]. Time: 1 [s] Finally [Tomography: 2/35]. Time: 1 [s] Finally [Tomography: 2/35]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 180 INFO: Output step into scan directory 2/36 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/36]. Time: 2 [s] Finally [Tomography: 2/36]. Time: 2 [s] Finally [Tomography: 2/36]. Time: 2 [s] Finally [Tomography: 2/36]. Time: 2 [s] Finally [Tomography: 2/36]. Time: 2 [s] Finally [Tomography: 2/36]. Time: 2 [s] Finally [Tomography: 2/36]. Time: 2 [s] Finally [Tomography: 2/36]. Time: 2 [s] Finally [Tomography: 2/36]. Time: 2 [s] Finally [Tomography: 2/36]. Time: 2 [s] Finally [Tomography: 2/36]. Time: 2 [s] Finally [Tomography: 2/36]. Time: 2 [s] Finally [Tomography: 2/36]. Time: 2 [s] Finally [Tomography: 2/36]. Time: 2 [s] Finally [Tomography: 2/36]. Time: 2 [s] Finally [Tomography: 2/36]. Time: 2 [s] Finally [Tomography: 2/36]. Time: 2 [s] Finally [Tomography: 2/36]. Time: 2 [s] Finally [Tomography: 2/36]. Time: 2 [s] Detector: monitor_I=9.39908e-10 monitor_ERR=1.51344e-12 monitor_N=468270 "monitor_1791616140.x_y" Finally [Tomography: 2/36]. Time: 2 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 185 INFO: Output step into scan directory 2/37 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] Detector: monitor_I=9.26222e-10 monitor_ERR=1.50238e-12 monitor_N=467835 "monitor_1791616142.x_y" Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] Finally [Tomography: 2/37]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 190 INFO: Output step into scan directory 2/38 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/38]. Time: 1 [s] Finally [Tomography: 2/38]. Time: 1 [s] Finally [Tomography: 2/38]. Time: 1 [s] Finally [Tomography: 2/38]. Time: 1 [s] Finally [Tomography: 2/38]. Time: 1 [s] Finally [Tomography: 2/38]. Time: 1 [s] Finally [Tomography: 2/38]. Time: 1 [s] Finally [Tomography: 2/38]. Time: 1 [s] Finally [Tomography: 2/38]. Time: 1 [s] Finally [Tomography: 2/38]. Time: 1 [s] Finally [Tomography: 2/38]. Time: 1 [s] Finally [Tomography: 2/38]. Time: 1 [s] Finally [Tomography: 2/38]. Time: 1 [s] Finally [Tomography: 2/38]. Time: 1 [s] Finally [Tomography: 2/38]. Time: 1 [s] Finally [Tomography: 2/38]. Time: 1 [s] Finally [Tomography: 2/38]. Time: 1 [s] Finally [Tomography: 2/38]. Time: 1 [s] Detector: monitor_I=9.14801e-10 monitor_ERR=1.49309e-12 monitor_N=468797 "monitor_1791616143.x_y" Finally [Tomography: 2/38]. Time: 1 [s] Finally [Tomography: 2/38]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 195 INFO: Output step into scan directory 2/39 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] Detector: monitor_I=9.03057e-10 monitor_ERR=1.48347e-12 monitor_N=468765 "monitor_1791616145.x_y" Finally [Tomography: 2/39]. Time: 1 [s] Finally [Tomography: 2/39]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 200 INFO: Output step into scan directory 2/40 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] Detector: monitor_I=8.94545e-10 monitor_ERR=1.47647e-12 monitor_N=468964 "monitor_1791616146.x_y" Finally [Tomography: 2/40]. Time: 1 [s] Finally [Tomography: 2/40]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 205 INFO: Output step into scan directory 2/41 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off [Tomography] Initialize [Tomography] Initialize Number of vertices: 327 [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/41]. Time: 1 [s] Finally [Tomography: 2/41]. Time: 1 [s] Finally [Tomography: 2/41]. Time: 1 [s] Finally [Tomography: 2/41]. Time: 1 [s] Finally [Tomography: 2/41]. Time: 1 [s] Finally [Tomography: 2/41]. Time: 1 [s] Finally [Tomography: 2/41]. Time: 1 [s] Finally [Tomography: 2/41]. Time: 1 [s] Finally [Tomography: 2/41]. Time: 1 [s] Finally [Tomography: 2/41]. Time: 1 [s] Finally [Tomography: 2/41]. Time: 1 [s] Finally [Tomography: 2/41]. Time: 1 [s] Finally [Tomography: 2/41]. Time: 1 [s] Finally [Tomography: 2/41]. Time: 1 [s] Finally [Tomography: 2/41]. Time: 1 [s] Finally [Tomography: 2/41]. Time: 1 [s] Finally [Tomography: 2/41]. Time: 1 [s] Finally [Tomography: 2/41]. Time: 1 [s] Finally [Tomography: 2/41]. Time: 1 [s] Detector: monitor_I=8.8797e-10 monitor_ERR=1.47103e-12 monitor_N=467973 "monitor_1791616147.x_y" Finally [Tomography: 2/41]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 210 INFO: Output step into scan directory 2/42 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 [Tomography] Initialize [Tomography] Initialize Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/42]. Time: 1 [s] Finally [Tomography: 2/42]. Time: 1 [s] Finally [Tomography: 2/42]. Time: 1 [s] Finally [Tomography: 2/42]. Time: 1 [s] Finally [Tomography: 2/42]. Time: 1 [s] Finally [Tomography: 2/42]. Time: 1 [s] Finally [Tomography: 2/42]. Time: 1 [s] Finally [Tomography: 2/42]. Time: 1 [s] Finally [Tomography: 2/42]. Time: 1 [s] Finally [Tomography: 2/42]. Time: 1 [s] Finally [Tomography: 2/42]. Time: 1 [s] Finally [Tomography: 2/42]. Time: 1 [s] Finally [Tomography: 2/42]. Time: 1 [s] Finally [Tomography: 2/42]. Time: 1 [s] Finally [Tomography: 2/42]. Time: 1 [s] Finally [Tomography: 2/42]. Time: 1 [s] Finally [Tomography: 2/42]. Time: 1 [s] Finally [Tomography: 2/42]. Time: 1 [s] Detector: monitor_I=8.86588e-10 monitor_ERR=1.46988e-12 monitor_N=468342 "monitor_1791616149.x_y" Finally [Tomography: 2/42]. Time: 1 [s] Finally [Tomography: 2/42]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 215 INFO: Output step into scan directory 2/43 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] Detector: monitor_I=8.89854e-10 monitor_ERR=1.47259e-12 monitor_N=468646 "monitor_1791616150.x_y" Finally [Tomography: 2/43]. Time: 1 [s] Finally [Tomography: 2/43]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 220 INFO: Output step into scan directory 2/44 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] Detector: monitor_I=8.88346e-10 monitor_ERR=1.47134e-12 monitor_N=468363 "monitor_1791616151.x_y" Finally [Tomography: 2/44]. Time: 1 [s] Finally [Tomography: 2/44]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 225 INFO: Output step into scan directory 2/45 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off [Tomography] Initialize [Tomography] Initialize Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/45]. Time: 1 [s] Finally [Tomography: 2/45]. Time: 1 [s] Finally [Tomography: 2/45]. Time: 1 [s] Finally [Tomography: 2/45]. Time: 1 [s] Finally [Tomography: 2/45]. Time: 1 [s] Finally [Tomography: 2/45]. Time: 1 [s] Finally [Tomography: 2/45]. Time: 1 [s] Finally [Tomography: 2/45]. Time: 1 [s] Finally [Tomography: 2/45]. Time: 1 [s] Finally [Tomography: 2/45]. Time: 1 [s] Finally [Tomography: 2/45]. Time: 1 [s] Finally [Tomography: 2/45]. Time: 1 [s] Finally [Tomography: 2/45]. Time: 1 [s] Finally [Tomography: 2/45]. Time: 1 [s] Finally [Tomography: 2/45]. Time: 1 [s] Finally [Tomography: 2/45]. Time: 1 [s] Finally [Tomography: 2/45]. Time: 1 [s] Finally [Tomography: 2/45]. Time: 1 [s] Finally [Tomography: 2/45]. Time: 1 [s] Detector: monitor_I=8.89028e-10 monitor_ERR=1.47191e-12 monitor_N=468602 "monitor_1791616152.x_y" Finally [Tomography: 2/45]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 230 INFO: Output step into scan directory 2/46 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] Finally [Tomography: 2/46]. Time: 1 [s] Detector: monitor_I=8.83152e-10 monitor_ERR=1.46703e-12 monitor_N=468023 "monitor_1791616153.x_y" Finally [Tomography: 2/46]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 235 INFO: Output step into scan directory 2/47 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/47]. Time: 0 [s] Finally [Tomography: 2/47]. Time: 0 [s] Finally [Tomography: 2/47]. Time: 0 [s] Finally [Tomography: 2/47]. Time: 0 [s] Finally [Tomography: 2/47]. Time: 0 [s] Finally [Tomography: 2/47]. Time: 0 [s] Finally [Tomography: 2/47]. Time: 0 [s] Finally [Tomography: 2/47]. Time: 0 [s] Finally [Tomography: 2/47]. Time: 0 [s] Finally [Tomography: 2/47]. Time: 0 [s] Finally [Tomography: 2/47]. Time: 0 [s] Finally [Tomography: 2/47]. Time: 0 [s] Finally [Tomography: 2/47]. Time: 0 [s] Finally [Tomography: 2/47]. Time: 0 [s] Finally [Tomography: 2/47]. Time: 0 [s] Finally [Tomography: 2/47]. Time: 0 [s] Finally [Tomography: 2/47]. Time: 0 [s] Finally [Tomography: 2/47]. Time: 0 [s] Finally [Tomography: 2/47]. Time: 0 [s] Detector: monitor_I=8.80974e-10 monitor_ERR=1.46522e-12 monitor_N=467508 "monitor_1791616155.x_y" Finally [Tomography: 2/47]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 240 INFO: Output step into scan directory 2/48 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] Detector: monitor_I=8.8142e-10 monitor_ERR=1.46559e-12 monitor_N=467562 "monitor_1791616156.x_y" Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] Finally [Tomography: 2/48]. Time: 0 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 245 INFO: Output step into scan directory 2/49 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 [Tomography] Initialize Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/49]. Time: 1 [s] Finally [Tomography: 2/49]. Time: 1 [s] Finally [Tomography: 2/49]. Time: 1 [s] Finally [Tomography: 2/49]. Time: 1 [s] Finally [Tomography: 2/49]. Time: 1 [s] Finally [Tomography: 2/49]. Time: 1 [s] Finally [Tomography: 2/49]. Time: 1 [s] Finally [Tomography: 2/49]. Time: 1 [s] Finally [Tomography: 2/49]. Time: 1 [s] Finally [Tomography: 2/49]. Time: 1 [s] Finally [Tomography: 2/49]. Time: 1 [s] Finally [Tomography: 2/49]. Time: 1 [s] Finally [Tomography: 2/49]. Time: 1 [s] Finally [Tomography: 2/49]. Time: 1 [s] Finally [Tomography: 2/49]. Time: 1 [s] Finally [Tomography: 2/49]. Time: 1 [s] Detector: monitor_I=8.84926e-10 monitor_ERR=1.46851e-12 monitor_N=467821 "monitor_1791616157.x_y" Finally [Tomography: 2/49]. Time: 1 [s] Finally [Tomography: 2/49]. Time: 1 [s] Finally [Tomography: 2/49]. Time: 1 [s] Finally [Tomography: 2/49]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 250 INFO: Output step into scan directory 2/50 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off [Tomography] Initialize [Tomography] Initialize Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] Detector: monitor_I=8.87285e-10 monitor_ERR=1.47046e-12 monitor_N=467645 "monitor_1791616158.x_y" Finally [Tomography: 2/50]. Time: 1 [s] Finally [Tomography: 2/50]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 255 INFO: Output step into scan directory 2/51 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/51]. Time: 1 [s] Finally [Tomography: 2/51]. Time: 1 [s] Finally [Tomography: 2/51]. Time: 1 [s] Finally [Tomography: 2/51]. Time: 1 [s] Finally [Tomography: 2/51]. Time: 1 [s] Finally [Tomography: 2/51]. Time: 1 [s] Finally [Tomography: 2/51]. Time: 1 [s] Finally [Tomography: 2/51]. Time: 1 [s] Finally [Tomography: 2/51]. Time: 1 [s] Finally [Tomography: 2/51]. Time: 1 [s] Finally [Tomography: 2/51]. Time: 1 [s] Finally [Tomography: 2/51]. Time: 1 [s] Finally [Tomography: 2/51]. Time: 1 [s] Finally [Tomography: 2/51]. Time: 1 [s] Finally [Tomography: 2/51]. Time: 1 [s] Finally [Tomography: 2/51]. Time: 1 [s] Finally [Tomography: 2/51]. Time: 1 [s] Finally [Tomography: 2/51]. Time: 1 [s] Finally [Tomography: 2/51]. Time: 1 [s] Detector: monitor_I=8.93205e-10 monitor_ERR=1.47536e-12 monitor_N=469190 "monitor_1791616159.x_y" Finally [Tomography: 2/51]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 260 INFO: Output step into scan directory 2/52 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/52]. Time: 1 [s] Finally [Tomography: 2/52]. Time: 1 [s] Finally [Tomography: 2/52]. Time: 1 [s] Finally [Tomography: 2/52]. Time: 1 [s] Finally [Tomography: 2/52]. Time: 1 [s] Finally [Tomography: 2/52]. Time: 1 [s] Finally [Tomography: 2/52]. Time: 1 [s] Finally [Tomography: 2/52]. Time: 1 [s] Finally [Tomography: 2/52]. Time: 1 [s] Finally [Tomography: 2/52]. Time: 1 [s] Finally [Tomography: 2/52]. Time: 1 [s] Finally [Tomography: 2/52]. Time: 1 [s] Finally [Tomography: 2/52]. Time: 1 [s] Finally [Tomography: 2/52]. Time: 1 [s] Finally [Tomography: 2/52]. Time: 1 [s] Detector: monitor_I=9.01358e-10 monitor_ERR=1.48208e-12 monitor_N=469115 "monitor_1791616160.x_y" Finally [Tomography: 2/52]. Time: 1 [s] Finally [Tomography: 2/52]. Time: 1 [s] Finally [Tomography: 2/52]. Time: 1 [s] Finally [Tomography: 2/52]. Time: 1 [s] Finally [Tomography: 2/52]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 265 INFO: Output step into scan directory 2/53 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] Detector: monitor_I=9.10009e-10 monitor_ERR=1.48917e-12 monitor_N=467954 "monitor_1791616161.x_y" Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] Finally [Tomography: 2/53]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 270 INFO: Output step into scan directory 2/54 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 [Tomography] Initialize Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/54]. Time: 1 [s] Finally [Tomography: 2/54]. Time: 1 [s] Finally [Tomography: 2/54]. Time: 1 [s] Finally [Tomography: 2/54]. Time: 1 [s] Finally [Tomography: 2/54]. Time: 1 [s] Finally [Tomography: 2/54]. Time: 1 [s] Finally [Tomography: 2/54]. Time: 1 [s] Finally [Tomography: 2/54]. Time: 1 [s] Finally [Tomography: 2/54]. Time: 1 [s] Finally [Tomography: 2/54]. Time: 1 [s] Finally [Tomography: 2/54]. Time: 1 [s] Finally [Tomography: 2/54]. Time: 1 [s] Finally [Tomography: 2/54]. Time: 1 [s] Finally [Tomography: 2/54]. Time: 1 [s] Finally [Tomography: 2/54]. Time: 1 [s] Finally [Tomography: 2/54]. Time: 1 [s] Finally [Tomography: 2/54]. Time: 1 [s] Finally [Tomography: 2/54]. Time: 1 [s] Finally [Tomography: 2/54]. Time: 1 [s] Detector: monitor_I=9.2293e-10 monitor_ERR=1.49971e-12 monitor_N=468248 "monitor_1791616162.x_y" Finally [Tomography: 2/54]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 275 INFO: Output step into scan directory 2/55 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/55]. Time: 1 [s] Finally [Tomography: 2/55]. Time: 1 [s] Finally [Tomography: 2/55]. Time: 1 [s] Finally [Tomography: 2/55]. Time: 1 [s] Finally [Tomography: 2/55]. Time: 1 [s] Finally [Tomography: 2/55]. Time: 1 [s] Finally [Tomography: 2/55]. Time: 1 [s] Finally [Tomography: 2/55]. Time: 1 [s] Finally [Tomography: 2/55]. Time: 1 [s] Finally [Tomography: 2/55]. Time: 1 [s] Finally [Tomography: 2/55]. Time: 1 [s] Finally [Tomography: 2/55]. Time: 1 [s] Finally [Tomography: 2/55]. Time: 1 [s] Finally [Tomography: 2/55]. Time: 1 [s] Finally [Tomography: 2/55]. Time: 1 [s] Finally [Tomography: 2/55]. Time: 1 [s] Finally [Tomography: 2/55]. Time: 1 [s] Finally [Tomography: 2/55]. Time: 1 [s] Finally [Tomography: 2/55]. Time: 1 [s] Detector: monitor_I=9.09178e-10 monitor_ERR=1.48849e-12 monitor_N=467690 "monitor_1791616163.x_y" Finally [Tomography: 2/55]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 280 INFO: Output step into scan directory 2/56 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Finally [Tomography: 2/56]. Time: 1 [s] Detector: monitor_I=8.97864e-10 monitor_ERR=1.4792e-12 monitor_N=468448 "monitor_1791616165.x_y" Finally [Tomography: 2/56]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 285 INFO: Output step into scan directory 2/57 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 [Tomography] Initialize [Tomography] Initialize Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] Detector: monitor_I=8.92166e-10 monitor_ERR=1.4745e-12 monitor_N=468867 "monitor_1791616166.x_y" Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] Finally [Tomography: 2/57]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 290 INFO: Output step into scan directory 2/58 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/58]. Time: 1 [s] Finally [Tomography: 2/58]. Time: 1 [s] Finally [Tomography: 2/58]. Time: 1 [s] Finally [Tomography: 2/58]. Time: 1 [s] Finally [Tomography: 2/58]. Time: 1 [s] Finally [Tomography: 2/58]. Time: 1 [s] Finally [Tomography: 2/58]. Time: 1 [s] Finally [Tomography: 2/58]. Time: 1 [s] Finally [Tomography: 2/58]. Time: 1 [s] Finally [Tomography: 2/58]. Time: 1 [s] Finally [Tomography: 2/58]. Time: 1 [s] Finally [Tomography: 2/58]. Time: 1 [s] Finally [Tomography: 2/58]. Time: 1 [s] Finally [Tomography: 2/58]. Time: 1 [s] Finally [Tomography: 2/58]. Time: 1 [s] Finally [Tomography: 2/58]. Time: 1 [s] Finally [Tomography: 2/58]. Time: 1 [s] Finally [Tomography: 2/58]. Time: 1 [s] Finally [Tomography: 2/58]. Time: 1 [s] Detector: monitor_I=8.85375e-10 monitor_ERR=1.46888e-12 monitor_N=467771 "monitor_1791616167.x_y" Finally [Tomography: 2/58]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 295 INFO: Output step into scan directory 2/59 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] Detector: monitor_I=8.82762e-10 monitor_ERR=1.46671e-12 monitor_N=468376 "monitor_1791616168.x_y" Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] Finally [Tomography: 2/59]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 300 INFO: Output step into scan directory 2/60 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/60]. Time: 2 [s] Finally [Tomography: 2/60]. Time: 2 [s] Finally [Tomography: 2/60]. Time: 2 [s] Finally [Tomography: 2/60]. Time: 2 [s] Finally [Tomography: 2/60]. Time: 2 [s] Finally [Tomography: 2/60]. Time: 2 [s] Finally [Tomography: 2/60]. Time: 2 [s] Finally [Tomography: 2/60]. Time: 2 [s] Finally [Tomography: 2/60]. Time: 2 [s] Finally [Tomography: 2/60]. Time: 2 [s] Finally [Tomography: 2/60]. Time: 2 [s] Finally [Tomography: 2/60]. Time: 2 [s] Finally [Tomography: 2/60]. Time: 2 [s] Finally [Tomography: 2/60]. Time: 2 [s] Finally [Tomography: 2/60]. Time: 2 [s] Finally [Tomography: 2/60]. Time: 2 [s] Finally [Tomography: 2/60]. Time: 2 [s] Finally [Tomography: 2/60]. Time: 2 [s] Finally [Tomography: 2/60]. Time: 2 [s] Detector: monitor_I=8.81278e-10 monitor_ERR=1.46548e-12 monitor_N=468972 "monitor_1791616169.x_y" Finally [Tomography: 2/60]. Time: 2 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 305 INFO: Output step into scan directory 2/61 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 [Tomography] Initialize Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] Detector: monitor_I=8.83313e-10 monitor_ERR=1.46717e-12 monitor_N=469820 "monitor_1791616171.x_y" Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] Finally [Tomography: 2/61]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 310 INFO: Output step into scan directory 2/62 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/62]. Time: 1 [s] Finally [Tomography: 2/62]. Time: 1 [s] Finally [Tomography: 2/62]. Time: 1 [s] Finally [Tomography: 2/62]. Time: 1 [s] Finally [Tomography: 2/62]. Time: 1 [s] Finally [Tomography: 2/62]. Time: 1 [s] Finally [Tomography: 2/62]. Time: 1 [s] Finally [Tomography: 2/62]. Time: 1 [s] Finally [Tomography: 2/62]. Time: 1 [s] Finally [Tomography: 2/62]. Time: 1 [s] Finally [Tomography: 2/62]. Time: 1 [s] Finally [Tomography: 2/62]. Time: 1 [s] Finally [Tomography: 2/62]. Time: 1 [s] Finally [Tomography: 2/62]. Time: 1 [s] Finally [Tomography: 2/62]. Time: 1 [s] Finally [Tomography: 2/62]. Time: 1 [s] Finally [Tomography: 2/62]. Time: 1 [s] Finally [Tomography: 2/62]. Time: 1 [s] Finally [Tomography: 2/62]. Time: 1 [s] Detector: monitor_I=8.83932e-10 monitor_ERR=1.46768e-12 monitor_N=468893 "monitor_1791616172.x_y" Finally [Tomography: 2/62]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 315 INFO: Output step into scan directory 2/63 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/63]. Time: 1 [s] Finally [Tomography: 2/63]. Time: 1 [s] Finally [Tomography: 2/63]. Time: 1 [s] Finally [Tomography: 2/63]. Time: 1 [s] Finally [Tomography: 2/63]. Time: 1 [s] Finally [Tomography: 2/63]. Time: 1 [s] Finally [Tomography: 2/63]. Time: 1 [s] Finally [Tomography: 2/63]. Time: 1 [s] Finally [Tomography: 2/63]. Time: 1 [s] Finally [Tomography: 2/63]. Time: 1 [s] Finally [Tomography: 2/63]. Time: 1 [s] Finally [Tomography: 2/63]. Time: 1 [s] Finally [Tomography: 2/63]. Time: 1 [s] Finally [Tomography: 2/63]. Time: 1 [s] Detector: monitor_I=8.83138e-10 monitor_ERR=1.46702e-12 monitor_N=467737 "monitor_1791616173.x_y" Finally [Tomography: 2/63]. Time: 1 [s] Finally [Tomography: 2/63]. Time: 1 [s] Finally [Tomography: 2/63]. Time: 1 [s] Finally [Tomography: 2/63]. Time: 1 [s] Finally [Tomography: 2/63]. Time: 1 [s] Finally [Tomography: 2/63]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 320 INFO: Output step into scan directory 2/64 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] Finally [Tomography: 2/64]. Time: 1 [s] Detector: monitor_I=8.89971e-10 monitor_ERR=1.47269e-12 monitor_N=469520 "monitor_1791616175.x_y" Finally [Tomography: 2/64]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 325 INFO: Output step into scan directory 2/65 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Number of vertices: 327 [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/65]. Time: 1 [s] Finally [Tomography: 2/65]. Time: 1 [s] Finally [Tomography: 2/65]. Time: 1 [s] Finally [Tomography: 2/65]. Time: 1 [s] Finally [Tomography: 2/65]. Time: 1 [s] Finally [Tomography: 2/65]. Time: 1 [s] Finally [Tomography: 2/65]. Time: 1 [s] Finally [Tomography: 2/65]. Time: 1 [s] Finally [Tomography: 2/65]. Time: 1 [s] Finally [Tomography: 2/65]. Time: 1 [s] Finally [Tomography: 2/65]. Time: 1 [s] Finally [Tomography: 2/65]. Time: 1 [s] Finally [Tomography: 2/65]. Time: 1 [s] Finally [Tomography: 2/65]. Time: 1 [s] Finally [Tomography: 2/65]. Time: 1 [s] Finally [Tomography: 2/65]. Time: 1 [s] Finally [Tomography: 2/65]. Time: 1 [s] Finally [Tomography: 2/65]. Time: 1 [s] Detector: monitor_I=8.87195e-10 monitor_ERR=1.47039e-12 monitor_N=468726 "monitor_1791616176.x_y" Finally [Tomography: 2/65]. Time: 1 [s] Finally [Tomography: 2/65]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 330 INFO: Output step into scan directory 2/66 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/66]. Time: 2 [s] Finally [Tomography: 2/66]. Time: 2 [s] Finally [Tomography: 2/66]. Time: 2 [s] Finally [Tomography: 2/66]. Time: 2 [s] Finally [Tomography: 2/66]. Time: 2 [s] Finally [Tomography: 2/66]. Time: 2 [s] Finally [Tomography: 2/66]. Time: 2 [s] Finally [Tomography: 2/66]. Time: 2 [s] Finally [Tomography: 2/66]. Time: 2 [s] Detector: monitor_I=8.84985e-10 monitor_ERR=1.46856e-12 monitor_N=468509 "monitor_1791616177.x_y" Finally [Tomography: 2/66]. Time: 2 [s] Finally [Tomography: 2/66]. Time: 2 [s] Finally [Tomography: 2/66]. Time: 2 [s] Finally [Tomography: 2/66]. Time: 2 [s] Finally [Tomography: 2/66]. Time: 2 [s] Finally [Tomography: 2/66]. Time: 2 [s] Finally [Tomography: 2/66]. Time: 2 [s] Finally [Tomography: 2/66]. Time: 2 [s] Finally [Tomography: 2/66]. Time: 2 [s] Finally [Tomography: 2/66]. Time: 2 [s] Finally [Tomography: 2/66]. Time: 2 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 335 INFO: Output step into scan directory 2/67 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] Detector: monitor_I=8.86803e-10 monitor_ERR=1.47006e-12 monitor_N=469064 "monitor_1791616179.x_y" Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] Finally [Tomography: 2/67]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 340 INFO: Output step into scan directory 2/68 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Number of vertices: 327 [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/68]. Time: 1 [s] Finally [Tomography: 2/68]. Time: 1 [s] Finally [Tomography: 2/68]. Time: 1 [s] Finally [Tomography: 2/68]. Time: 1 [s] Finally [Tomography: 2/68]. Time: 1 [s] Finally [Tomography: 2/68]. Time: 1 [s] Finally [Tomography: 2/68]. Time: 1 [s] Finally [Tomography: 2/68]. Time: 1 [s] Finally [Tomography: 2/68]. Time: 1 [s] Finally [Tomography: 2/68]. Time: 1 [s] Finally [Tomography: 2/68]. Time: 1 [s] Detector: monitor_I=8.93597e-10 monitor_ERR=1.47568e-12 monitor_N=468700 "monitor_1791616180.x_y" Finally [Tomography: 2/68]. Time: 1 [s] Finally [Tomography: 2/68]. Time: 1 [s] Finally [Tomography: 2/68]. Time: 1 [s] Finally [Tomography: 2/68]. Time: 1 [s] Finally [Tomography: 2/68]. Time: 1 [s] Finally [Tomography: 2/68]. Time: 1 [s] Finally [Tomography: 2/68]. Time: 1 [s] Finally [Tomography: 2/68]. Time: 1 [s] Finally [Tomography: 2/68]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 345 INFO: Output step into scan directory 2/69 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/69]. Time: 1 [s] Finally [Tomography: 2/69]. Time: 1 [s] Finally [Tomography: 2/69]. Time: 1 [s] Finally [Tomography: 2/69]. Time: 1 [s] Finally [Tomography: 2/69]. Time: 1 [s] Finally [Tomography: 2/69]. Time: 1 [s] Finally [Tomography: 2/69]. Time: 1 [s] Finally [Tomography: 2/69]. Time: 1 [s] Finally [Tomography: 2/69]. Time: 1 [s] Finally [Tomography: 2/69]. Time: 1 [s] Finally [Tomography: 2/69]. Time: 1 [s] Finally [Tomography: 2/69]. Time: 1 [s] Finally [Tomography: 2/69]. Time: 1 [s] Finally [Tomography: 2/69]. Time: 1 [s] Finally [Tomography: 2/69]. Time: 1 [s] Finally [Tomography: 2/69]. Time: 1 [s] Finally [Tomography: 2/69]. Time: 1 [s] Finally [Tomography: 2/69]. Time: 1 [s] Finally [Tomography: 2/69]. Time: 1 [s] Detector: monitor_I=9.01795e-10 monitor_ERR=1.48244e-12 monitor_N=468210 "monitor_1791616182.x_y" Finally [Tomography: 2/69]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 350 INFO: Output step into scan directory 2/70 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] Finally [Tomography: 2/70]. Time: 1 [s] Detector: monitor_I=9.10324e-10 monitor_ERR=1.48943e-12 monitor_N=467197 "monitor_1791616183.x_y" Finally [Tomography: 2/70]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: omega: 355 INFO: Output step into scan directory 2/71 Simulation 'Tomography' (Tomography.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize [Tomography] Initialize Loading geometry file (OFF/PLY): socket.off Number of vertices: 327 Number of polygons: 678 Bounding box dimensions for geometry socket.off: Length=0.100000 (0.050%) Width= 0.100000 (0.050%) Depth= 0.075000 (0.050%) Incoherent: sample: Vc=13.827 [Angs] sigma_abs=100 [barn] sigma_inc=5.08 [barn] *** TRACE end *** Save [Tomography] Finally [Tomography: 2/71]. Time: 1 [s] Finally [Tomography: 2/71]. Time: 1 [s] Finally [Tomography: 2/71]. Time: 1 [s] Finally [Tomography: 2/71]. Time: 1 [s] Finally [Tomography: 2/71]. Time: 1 [s] Finally [Tomography: 2/71]. Time: 1 [s] Finally [Tomography: 2/71]. Time: 1 [s] Finally [Tomography: 2/71]. Time: 1 [s] Finally [Tomography: 2/71]. Time: 1 [s] Finally [Tomography: 2/71]. Time: 1 [s] Finally [Tomography: 2/71]. Time: 1 [s] Finally [Tomography: 2/71]. Time: 1 [s] Finally [Tomography: 2/71]. Time: 1 [s] Finally [Tomography: 2/71]. Time: 1 [s] Finally [Tomography: 2/71]. Time: 1 [s] Finally [Tomography: 2/71]. Time: 1 [s] Detector: monitor_I=9.27516e-10 monitor_ERR=1.50343e-12 monitor_N=468227 "monitor_1791616185.x_y" Finally [Tomography: 2/71]. Time: 1 [s] Finally [Tomography: 2/71]. Time: 1 [s] Finally [Tomography: 2/71]. Time: 1 [s] Finally [Tomography: 2/71]. Time: 1 [s] INFO: Finish running step, get detectors INFO: Got detectors INFO: Write step detectors line into 2/mccode.dat INFO: Scan complete: all 72 point(s) succeeded. INFO: Placing instr file copy Tomography.instr in dataset 2 INFO: Placing generated c-code copy Tomography.c in dataset 2