INFO: Using directory: "1"
INFO: Using existing c-file: ./ILL_H53_D16.c
INFO: Using existing binary: ./ILL_H53_D16.out
INFO: ===
Simulation 'ILL_H53_D16' (ILL_H53_D16.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1).
Instrument: ILL_H53 (H53@ILL cold guide on HCS).
Instrument: ILL_H53 (H53@ILL cold guide on HCS).
Instrument: ILL_H53 (H53@ILL cold guide on HCS).
Instrument: ILL_H53 (H53@ILL cold guide on HCS).
Instrument: ILL_H53 (H53@ILL cold guide on HCS).
Instrument: ILL_H53 (H53@ILL cold guide on HCS).
ILL_H53_D16: Detailed D16 configuration on H53@ILL
* Incoming beam: lambda=4.7 +/- 0.05 [Angs] EI=3.703 [meV]  KI=1.337 [Angs-1] Vi=841.709 [m/s]
Instrument: ILL_H53 (H53@ILL cold guide on HCS).
ILL_H53_D16: Detailed D16 configuration on H53@ILL
* Incoming beam: lambda=4.7 +/- 0.05 [Angs] EI=3.703 [meV]  KI=1.337 [Angs-1] Vi=841.709 [m/s]
* Monochromator:  DM=3.355 [Angs] RV=3.922 [m] curved, take-off THETA_M=88.92 [deg]
* MILAND Detector: entrance window radius=0.36 [m] thickness=0.01 [m] gap=0.08 [m]
Instrument: ILL_H53 (H53@ILL cold guide on HCS).
ILL_H53_D16: Detailed D16 configuration on H53@ILL
Instrument: ILL_H53 (H53@ILL cold guide on HCS).
ILL_H53_D16: Detailed D16 configuration on H53@ILL
* Incoming beam: lambda=4.7 +/- 0.05 [Angs] EI=3.703 [meV]  KI=1.337 [Angs-1] Vi=841.709 [m/s]
* Monochromator:  DM=3.355 [Angs] RV=3.922 [m] curved, take-off THETA_M=88.92 [deg]
* MILAND Detector: entrance window radius=0.36 [m] thickness=0.01 [m] gap=0.08 [m]
Instrument: ILL_H53 (H53@ILL cold guide on HCS).
ILL_H53_D16: Detailed D16 configuration on H53@ILL
* Incoming beam: lambda=4.7 +/- 0.05 [Angs] EI=3.703 [meV]  KI=1.337 [Angs-1] Vi=841.709 [m/s]
* Monochromator:  DM=3.355 [Angs] RV=3.922 [m] curved, take-off THETA_M=88.92 [deg]
* MILAND Detector: entrance window radius=0.36 [m] thickness=0.01 [m] gap=0.08 [m]
Instrument: ILL_H53 (H53@ILL cold guide on HCS).
ILL_H53_D16: Detailed D16 configuration on H53@ILL
* Incoming beam: lambda=4.7 +/- 0.05 [Angs] EI=3.703 [meV]  KI=1.337 [Angs-1] Vi=841.709 [m/s]
* Monochromator:  DM=3.355 [Angs] RV=3.922 [m] curved, take-off THETA_M=88.92 [deg]
* MILAND Detector: entrance window radius=0.36 [m] thickness=0.01 [m] gap=0.08 [m]
Instrument: ILL_H53 (H53@ILL cold guide on HCS).
ILL_H53_D16: Detailed D16 configuration on H53@ILL
* Incoming beam: lambda=4.7 +/- 0.05 [Angs] EI=3.703 [meV]  KI=1.337 [Angs-1] Vi=841.709 [m/s]
* Monochromator:  DM=3.355 [Angs] RV=3.922 [m] curved, take-off THETA_M=88.92 [deg]
* MILAND Detector: entrance window radius=0.36 [m] thickness=0.01 [m] gap=0.08 [m]
Instrument: ILL_H53 (H53@ILL cold guide on HCS).
ILL_H53_D16: Detailed D16 configuration on H53@ILL
* Incoming beam: lambda=4.7 +/- 0.05 [Angs] EI=3.703 [meV]  KI=1.337 [Angs-1] Vi=841.709 [m/s]
* Monochromator:  DM=3.355 [Angs] RV=3.922 [m] curved, take-off THETA_M=88.92 [deg]
* MILAND Detector: entrance window radius=0.36 [m] thickness=0.01 [m] gap=0.08 [m]
Instrument: ILL_H53 (H53@ILL cold guide on HCS).
ILL_H53_D16: Detailed D16 configuration on H53@ILL
* Incoming beam: lambda=4.7 +/- 0.05 [Angs] EI=3.703 [meV]  KI=1.337 [Angs-1] Vi=841.709 [m/s]
* Monochromator:  DM=3.355 [Angs] RV=3.922 [m] curved, take-off THETA_M=88.92 [deg]
* MILAND Detector: entrance window radius=0.36 [m] thickness=0.01 [m] gap=0.08 [m]
Instrument: ILL_H53 (H53@ILL cold guide on HCS).
ILL_H53_D16: Detailed D16 configuration on H53@ILL
* Incoming beam: lambda=4.7 +/- 0.05 [Angs] EI=3.703 [meV]  KI=1.337 [Angs-1] Vi=841.709 [m/s]
* Monochromator:  DM=3.355 [Angs] RV=3.922 [m] curved, take-off THETA_M=88.92 [deg]
* MILAND Detector: entrance window radius=0.36 [m] thickness=0.01 [m] gap=0.08 [m]
Instrument: ILL_H53 (H53@ILL cold guide on HCS).
ILL_H53_D16: Detailed D16 configuration on H53@ILL
* Incoming beam: lambda=4.7 +/- 0.05 [Angs] EI=3.703 [meV]  KI=1.337 [Angs-1] Vi=841.709 [m/s]
* Monochromator:  DM=3.355 [Angs] RV=3.922 [m] curved, take-off THETA_M=88.92 [deg]
* MILAND Detector: entrance window radius=0.36 [m] thickness=0.01 [m] gap=0.08 [m]
Instrument: ILL_H53 (H53@ILL cold guide on HCS).
ILL_H53_D16: Detailed D16 configuration on H53@ILL
* Incoming beam: lambda=4.7 +/- 0.05 [Angs] EI=3.703 [meV]  KI=1.337 [Angs-1] Vi=841.709 [m/s]
* Monochromator:  DM=3.355 [Angs] RV=3.922 [m] curved, take-off THETA_M=88.92 [deg]
* MILAND Detector: entrance window radius=0.36 [m] thickness=0.01 [m] gap=0.08 [m]
Instrument: ILL_H53 (H53@ILL cold guide on HCS).
ILL_H53_D16: Detailed D16 configuration on H53@ILL
* Incoming beam: lambda=4.7 +/- 0.05 [Angs] EI=3.703 [meV]  KI=1.337 [Angs-1] Vi=841.709 [m/s]
* Monochromator:  DM=3.355 [Angs] RV=3.922 [m] curved, take-off THETA_M=88.92 [deg]
* MILAND Detector: entrance window radius=0.36 [m] thickness=0.01 [m] gap=0.08 [m]
Instrument: ILL_H53 (H53@ILL cold guide on HCS).
ILL_H53_D16: Detailed D16 configuration on H53@ILL
* Incoming beam: lambda=4.7 +/- 0.05 [Angs] EI=3.703 [meV]  KI=1.337 [Angs-1] Vi=841.709 [m/s]
* Monochromator:  DM=3.355 [Angs] RV=3.922 [m] curved, take-off THETA_M=88.92 [deg]
* MILAND Detector: entrance window radius=0.36 [m] thickness=0.01 [m] gap=0.08 [m]
ILL_H53_D16: Detailed D16 configuration on H53@ILL
* Incoming beam: lambda=4.7 +/- 0.05 [Angs] EI=3.703 [meV]  KI=1.337 [Angs-1] Vi=841.709 [m/s]
* Monochromator:  DM=3.355 [Angs] RV=3.922 [m] curved, take-off THETA_M=88.92 [deg]
* MILAND Detector: entrance window radius=0.36 [m] thickness=0.01 [m] gap=0.08 [m]
ILL_H53_D16: Detailed D16 configuration on H53@ILL
* Incoming beam: lambda=4.7 +/- 0.05 [Angs] EI=3.703 [meV]  KI=1.337 [Angs-1] Vi=841.709 [m/s]
* Monochromator:  DM=3.355 [Angs] RV=3.922 [m] curved, take-off THETA_M=88.92 [deg]
* MILAND Detector: entrance window radius=0.36 [m] thickness=0.01 [m] gap=0.08 [m]
ILL_H53_D16: Detailed D16 configuration on H53@ILL
* Incoming beam: lambda=4.7 +/- 0.05 [Angs] EI=3.703 [meV]  KI=1.337 [Angs-1] Vi=841.709 [m/s]
* Monochromator:  DM=3.355 [Angs] RV=3.922 [m] curved, take-off THETA_M=88.92 [deg]
* MILAND Detector: entrance window radius=0.36 [m] thickness=0.01 [m] gap=0.08 [m]
ILL_H53_D16: Detailed D16 configuration on H53@ILL
* Incoming beam: lambda=4.7 +/- 0.05 [Angs] EI=3.703 [meV]  KI=1.337 [Angs-1] Vi=841.709 [m/s]
* Monochromator:  DM=3.355 [Angs] RV=3.922 [m] curved, take-off THETA_M=88.92 [deg]
* MILAND Detector: entrance window radius=0.36 [m] thickness=0.01 [m] gap=0.08 [m]
ILL_H53_D16: Detailed D16 configuration on H53@ILL
* Incoming beam: lambda=4.7 +/- 0.05 [Angs] EI=3.703 [meV]  KI=1.337 [Angs-1] Vi=841.709 [m/s]
* Monochromator:  DM=3.355 [Angs] RV=3.922 [m] curved, take-off THETA_M=88.92 [deg]
* MILAND Detector: entrance window radius=0.36 [m] thickness=0.01 [m] gap=0.08 [m]
* Monochromator:  DM=3.355 [Angs] RV=3.922 [m] curved, take-off THETA_M=88.92 [deg]
* MILAND Detector: entrance window radius=0.36 [m] thickness=0.01 [m] gap=0.08 [m]
* Incoming beam: lambda=4.7 +/- 0.05 [Angs] EI=3.703 [meV]  KI=1.337 [Angs-1] Vi=841.709 [m/s]
* Monochromator:  DM=3.355 [Angs] RV=3.922 [m] curved, take-off THETA_M=88.92 [deg]
* MILAND Detector: entrance window radius=0.36 [m] thickness=0.01 [m] gap=0.08 [m]
Instrument: ILL_H53 (H53@ILL cold guide on HCS).
ILL_H53_D16: Detailed D16 configuration on H53@ILL
* Incoming beam: lambda=4.7 +/- 0.05 [Angs] EI=3.703 [meV]  KI=1.337 [Angs-1] Vi=841.709 [m/s]
* Monochromator:  DM=3.355 [Angs] RV=3.922 [m] curved, take-off THETA_M=88.92 [deg]
* MILAND Detector: entrance window radius=0.36 [m] thickness=0.01 [m] gap=0.08 [m]
[ILL_H53_D16] Initialize
Source_gen: component HCS (square 0.1 x 0.1)
            focusing distance dist=2.155 area=0.06 x 0.12
            spectra 4.650 to 4.750 AA (3.626 to 3.784 meV)
            T1=40.1 K (4.865 AA), T2=145.8 K (2.552 AA), T3=413.5 K (1.515 AA)
  Flux is dPhi/dlambda in [n/s/cm2].
Al_window Al_window1 WARNING: Using simple lo-fi transmission model.
 - Replace with PowderN or NCrystal for bragg edges etc.
Al_window Al_window2 WARNING: Using simple lo-fi transmission model.
 - Replace with PowderN or NCrystal for bragg edges etc.
Al_window Al_window3 WARNING: Using simple lo-fi transmission model.
 - Replace with PowderN or NCrystal for bragg edges etc.
Al_window Al_window4 WARNING: Using simple lo-fi transmission model.
 - Replace with PowderN or NCrystal for bragg edges etc.
Al_window Al_window5 WARNING: Using simple lo-fi transmission model.
 - Replace with PowderN or NCrystal for bragg edges etc.
Al_window Al_window6 WARNING: Using simple lo-fi transmission model.
 - Replace with PowderN or NCrystal for bragg edges etc.
Al_window Al_window7 WARNING: Using simple lo-fi transmission model.
 - Replace with PowderN or NCrystal for bragg edges etc.
Al_window Al_window8 WARNING: Using simple lo-fi transmission model.
 - Replace with PowderN or NCrystal for bragg edges etc.
Al_window Al_window9 WARNING: Using simple lo-fi transmission model.
 - Replace with PowderN or NCrystal for bragg edges etc.
Al_window H53_COM_In WARNING: Using simple lo-fi transmission model.
 - Replace with PowderN or NCrystal for bragg edges etc.
Al_window H53_COM_Out WARNING: Using simple lo-fi transmission model.
 - Replace with PowderN or NCrystal for bragg edges etc.
Al_window H53_C1_In WARNING: Using simple lo-fi transmission model.
 - Replace with PowderN or NCrystal for bragg edges etc.
Al_window H53_C1_Out WARNING: Using simple lo-fi transmission model.
 - Replace with PowderN or NCrystal for bragg edges etc.
Al_window H53_C2_In WARNING: Using simple lo-fi transmission model.
 - Replace with PowderN or NCrystal for bragg edges etc.
Al_window H53_C2_Out WARNING: Using simple lo-fi transmission model.
 - Replace with PowderN or NCrystal for bragg edges etc.
Al_window H53_C3_In WARNING: Using simple lo-fi transmission model.
 - Replace with PowderN or NCrystal for bragg edges etc.
Al_window H53_C3_Out WARNING: Using simple lo-fi transmission model.
 - Replace with PowderN or NCrystal for bragg edges etc.
Al_window H53_P1_In WARNING: Using simple lo-fi transmission model.
 - Replace with PowderN or NCrystal for bragg edges etc.
Al_window H53_P1_Out WARNING: Using simple lo-fi transmission model.
 - Replace with PowderN or NCrystal for bragg edges etc.
Al_window H53_P2_In WARNING: Using simple lo-fi transmission model.
 - Replace with PowderN or NCrystal for bragg edges etc.
Al_window H53_P2_Out WARNING: Using simple lo-fi transmission model.
 - Replace with PowderN or NCrystal for bragg edges etc.
Al_window H53_P3_In WARNING: Using simple lo-fi transmission model.
 - Replace with PowderN or NCrystal for bragg edges etc.
[ILL_H53_D16] Initialize
Al_window H53_P3_Out WARNING: Using simple lo-fi transmission model.
 - Replace with PowderN or NCrystal for bragg edges etc.
Al_window H53_P4_In WARNING: Using simple lo-fi transmission model.
 - Replace with PowderN or NCrystal for bragg edges etc.
Al_window H53_P4_Out WARNING: Using simple lo-fi transmission model.
 - Replace with PowderN or NCrystal for bragg edges etc.
Al_window H53_P5_In WARNING: Using simple lo-fi transmission model.
 - Replace with PowderN or NCrystal for bragg edges etc.
Al_window H53_P5_Out WARNING: Using simple lo-fi transmission model.
 - Replace with PowderN or NCrystal for bragg edges etc.
Monitor_nD: Mono_XY is using automatic limits option 'auto' together with MPI.
WARNING     this may create incorrect distributions (but integrated flux will be right).
Monitor_nD: D16_flux is using automatic limits option 'auto' together with MPI.
WARNING     this may create incorrect distributions (but integrated flux will be right).
[ILL_H53_D16] Initialize
Opening input file '/u/data/pkwi/McStas/mcstas/3.x-dev/data/Na2Ca3Al2F14.laz' (Table_Read_Offset)
[ILL_H53_D16] Initialize
[ILL_H53_D16] Initialize
[ILL_H53_D16] Initialize
[ILL_H53_D16] Initialize
[ILL_H53_D16] Initialize
[ILL_H53_D16] Initialize
[ILL_H53_D16] Initialize
[ILL_H53_D16] Initialize
[ILL_H53_D16] Initialize
[ILL_H53_D16] Initialize
[ILL_H53_D16] Initialize
[ILL_H53_D16] Initialize
[ILL_H53_D16] Initialize
[ILL_H53_D16] Initialize
[ILL_H53_D16] Initialize
[ILL_H53_D16] Initialize
[ILL_H53_D16] Initialize
Table from file 'Na2Ca3Al2F14.laz' (block 1) is 841 x 18 (x=1:20), constant step. interpolation: linear
  '# TITLE *-Na2Ca3Al2F14-[I213] Courbion, G.;Ferey, G.[1988] Standard NAC cal ...'
PowderN: SampleP: Reading 841 rows from Na2Ca3Al2F14.laz
Sans_spheres: SampleC: The target is not defined. Using direct beam (Z-axis).
PowderN: SampleP: Read 841 reflections from file 'Na2Ca3Al2F14.laz'
PowderN: SampleP: Vc=1079.1 [Angs] sigma_abs=11.7856 [barn] sigma_inc=13.6704 [barn] reflections=Na2Ca3Al2F14.laz
Sans_spheres: SampleC: The target is not defined. Using direct beam (Z-axis).
PowderN: Det_input: Concentric mode - remember to include the 'opposite' copy of this component !
WARNING  The equivalent, 'opposite' comp should have concentric=0
Opening input file '/u/data/pkwi/McStas/mcstas/3.x-dev/data/Al.lau' (Table_Read_Offset)
Sans_spheres: SampleC: The target is not defined. Using direct beam (Z-axis).
Sans_spheres: SampleC: The target is not defined. Using direct beam (Z-axis).
Sans_spheres: SampleC: The target is not defined. Using direct beam (Z-axis).
Sans_spheres: SampleC: The target is not defined. Using direct beam (Z-axis).
Sans_spheres: SampleC: The target is not defined. Using direct beam (Z-axis).
Sans_spheres: SampleC: The target is not defined. Using direct beam (Z-axis).
Sans_spheres: SampleC: The target is not defined. Using direct beam (Z-axis).
Sans_spheres: SampleC: The target is not defined. Using direct beam (Z-axis).
Sans_spheres: SampleC: The target is not defined. Using direct beam (Z-axis).
Sans_spheres: SampleC: The target is not defined. Using direct beam (Z-axis).
Sans_spheres: SampleC: The target is not defined. Using direct beam (Z-axis).
Sans_spheres: SampleC: The target is not defined. Using direct beam (Z-axis).
Sans_spheres: SampleC: The target is not defined. Using direct beam (Z-axis).
Sans_spheres: SampleC: The target is not defined. Using direct beam (Z-axis).
Sans_spheres: SampleC: The target is not defined. Using direct beam (Z-axis).
Sans_spheres: SampleC: The target is not defined. Using direct beam (Z-axis).
Sans_spheres: SampleC: The target is not defined. Using direct beam (Z-axis).
Table from file 'Al.lau' (block 1) is 2204 x 7 (x=-8:8), constant step. interpolation: linear
  '# TITLE *Aluminum-Al-[FM3-M] Miller, H.P.jr.;DuMond, J.W.M.[1942] at 298 K; ...'
PowderN: Det_input: Reading 2204 rows from Al.lau
PowderN: Det_input: Powder file probably of type Crystallographica/Fullprof (lau)
WARNING: but F2 unit is set to barns=1 (barns). Intensity might be 100 times too high.
Sans_spheres: SampleC: The target is not defined. Using direct beam (Z-axis).
PowderN: Det_input: Read 2204 reflections from file 'Al.lau'
PowderN: Det_input: Vc=66.4 [Angs] sigma_abs=0.924 [barn] sigma_inc=0.0328 [barn] reflections=Al.lau
Opening input file '/u/data/pkwi/McStas/mcstas/3.x-dev/data/Al.lau' (Table_Read_Offset)
Table from file 'Al.lau' (block 1) is 2204 x 7 (x=-8:8), constant step. interpolation: linear
  '# TITLE *Aluminum-Al-[FM3-M] Miller, H.P.jr.;DuMond, J.W.M.[1942] at 298 K; ...'
PowderN: Det_input_flat: Reading 2204 rows from Al.lau
PowderN: Det_input_flat: Powder file probably of type Crystallographica/Fullprof (lau)
WARNING: but F2 unit is set to barns=1 (barns). Intensity might be 100 times too high.
PowderN: Det_input_flat: Read 2204 reflections from file 'Al.lau'
PowderN: Det_input_flat: Vc=66.4 [Angs] sigma_abs=0.924 [barn] sigma_inc=0.0328 [barn] reflections=Al.lau
Monitor_nD: Det_psd_flat_q is using automatic limits option 'auto' together with MPI.
WARNING     this may create incorrect distributions (but integrated flux will be right).
Opening input file '/u/data/pkwi/McStas/mcstas/3.x-dev/data/Gas_tables/He3inHe.table' (Table_Read_Offset)
Opening input file '/u/data/pkwi/McStas/mcstas/3.x-dev/data/Gas_tables/He3inCF4.table' (Table_Read_Offset)
Opening input file '/u/data/pkwi/McStas/mcstas/3.x-dev/data/Gas_tables/He3inHe.table' (Table_Read_Offset)
Opening input file '/u/data/pkwi/McStas/mcstas/3.x-dev/data/Gas_tables/He3inCF4.table' (Table_Read_Offset)
Opening input file '/u/data/pkwi/McStas/mcstas/3.x-dev/data/Gas_tables/He3inHe.table' (Table_Read_Offset)
Opening input file '/u/data/pkwi/McStas/mcstas/3.x-dev/data/Gas_tables/He3inCF4.table' (Table_Read_Offset)
*** TRACE end *** 

Save [ILL_H53_D16]
Detector: H53_P5_Out_Phic_I=2.42406e+08 H53_P5_Out_Phic_ERR=871847 H53_P5_Out_Phic_N=410769 "H53_P5_Out_Phic.dat"
Detector: Mono_XY_I=6.60846e+09 Mono_XY_ERR=2.39033e+07 Mono_XY_N=401178 "Mono_XY_1773722482.x_y"
Detector: D16_flux_I=6.44178e+06 D16_flux_ERR=97101 D16_flux_N=8353 "D16_flux_1773722482.L"
Detector: D16_xy_I=6.43006e+06 D16_xy_ERR=30679 D16_xy_N=83560 "D16_xy_1773722482.x_y"
Detector: D16_BananaTheta_I=91512.7 D16_BananaTheta_ERR=998.191 D16_BananaTheta_N=26572 "D16_BananaTheta_1773722482.th"
Detector: Det_psd_flat_I=1.96351e+07 Det_psd_flat_ERR=793352 Det_psd_flat_N=1792 "Det_psd_flat_1773722482.x_y"
Detector: Det_psd_flat_q_I=363.722 Det_psd_flat_q_ERR=143.782 Det_psd_flat_q_N=19 "Det_psd_flat_q_1773722482.xy"
Detector: Det_psd_flat_al_I=5794.69 Det_psd_flat_al_ERR=1070.14 Det_psd_flat_al_N=516 "Det_psd_flat_al_1773722482.x_y"

Finally [ILL_H53_D16: 1]. Time: 1 [s] 

Finally [ILL_H53_D16: 1]. Time: 1 [s] 

Finally [ILL_H53_D16: 1]. Time: 1 [s] 

Finally [ILL_H53_D16: 1]. Time: 1 [s] 

Finally [ILL_H53_D16: 1]. Time: 1 [s] 

Finally [ILL_H53_D16: 1]. Time: 1 [s] 

Finally [ILL_H53_D16: 1]. Time: 1 [s] 

Finally [ILL_H53_D16: 1]. Time: 1 [s] 

Finally [ILL_H53_D16: 1]. Time: 1 [s] 

Finally [ILL_H53_D16: 1]. Time: 1 [s] 

Finally [ILL_H53_D16: 1]. Time: 1 [s] 

Finally [ILL_H53_D16: 1]. Time: 1 [s] 
Detector: Det_psd_I=4824.8 Det_psd_ERR=935.702 Det_psd_N=520 "D16.psd"

Finally [ILL_H53_D16: 1]. Time: 1 [s] 

Finally [ILL_H53_D16: 1]. Time: 1 [s] 

Finally [ILL_H53_D16: 1]. Time: 1 [s] 

Finally [ILL_H53_D16: 1]. Time: 1 [s] 

Finally [ILL_H53_D16: 1]. Time: 1 [s] 

Finally [ILL_H53_D16: 1]. Time: 1 [s] 

Finally [ILL_H53_D16: 1]. Time: 1 [s] 

Finally [ILL_H53_D16: 1]. Time: 2 [s] 
PowderN: Det_input: Info: you may highly improve the computation efficiency by using
    SPLIT 19 COMPONENT Det_input=PowderN(...)
  in the instrument description ILL_H53_D16.instr.
PowderN: Det_input_flat: Info: you may highly improve the computation efficiency by using
    SPLIT 19 COMPONENT Det_input_flat=PowderN(...)
  in the instrument description ILL_H53_D16.instr.
INFO: Placing instr file copy ILL_H53_D16.instr in dataset 1
INFO: Placing generated c-code copy ILL_H53_D16.c in dataset 1