INFO: Using directory: "1"
INFO: Using existing c-file: ./Samples_Isotropic_Sqw.c
INFO: Using existing binary: ./Samples_Isotropic_Sqw.out
INFO: ===
[Samples_Isotropic_Sqw] Initialize
[Samples_Isotropic_Sqw] Initialize
[Samples_Isotropic_Sqw] Initialize
[Samples_Isotropic_Sqw] Initialize
[Samples_Isotropic_Sqw] Initialize
[Samples_Isotropic_Sqw] Initialize
[Samples_Isotropic_Sqw] Initialize
[Samples_Isotropic_Sqw] Initialize
[Samples_Isotropic_Sqw] Initialize
Simulation 'Samples_Isotropic_Sqw' (Samples_Isotropic_Sqw.instr): running on 16 nodes (master is 'elearn1.fysik.dtu.dk', MPI version 3.1).
[Samples_Isotropic_Sqw] Initialize
Isotropic_Sqw: Sample: is a cylinder: radius=0.010000 thickness=0.000000 height=0.055000 [J Comp Phys 228 (2009) 5251]
Opening input file '/home/nexmap/pkwi/McStas/mcstas/3.x-dev/data/Rb_liq_inc.sqw' (Table_Read_Offset)
Opening input file '/home/nexmap/pkwi/McStas/mcstas/3.x-dev/data/Rb_liq_inc.sqw' (Table_Read_Offset)
Opening input file '/home/nexmap/pkwi/McStas/mcstas/3.x-dev/data/Rb_liq_inc.sqw' (Table_Read_Offset)
[Samples_Isotropic_Sqw] Initialize
[Samples_Isotropic_Sqw] Initialize
[Samples_Isotropic_Sqw] Initialize
[Samples_Isotropic_Sqw] Initialize
[Samples_Isotropic_Sqw] Initialize
[Samples_Isotropic_Sqw] Initialize
Opening input file '/home/nexmap/pkwi/McStas/mcstas/3.x-dev/data/Rb_liq_inc.sqw' (Table_Read_Offset)
Isotropic_Sqw: Sample: Temperature set to T=350 [K]
Isotropic_Sqw: Sample: S(q,w) data from Rb_liq_inc.sqw (inc) assumed to be classical (symmetrised in energy).
Isotropic_Sqw: Sample: Applying exp(hw/2kT) factor with T=350 [K] on Rb_liq_inc.sqw file (classical/symmetric) using 'Frommhold' quantum correction
Isotropic_Sqw: Sample: Generated Rb_liq_inc.sqw incoherent Sqw
                   q=[0.1:10 Angs-1] w=[0:101.849 meV] |S|=0.985192 size=[101x10185] sigma=0.5 [barns]
                   normalization factor S(q,w)*0.492586 (auto) \int q^2 S(q) dq=676.701
Opening input file '/home/nexmap/pkwi/McStas/mcstas/3.x-dev/data/Rb_liq_coh.sqw' (Table_Read_Offset)
Opening input file '/home/nexmap/pkwi/McStas/mcstas/3.x-dev/data/Rb_liq_coh.sqw' (Table_Read_Offset)
Opening input file '/home/nexmap/pkwi/McStas/mcstas/3.x-dev/data/Rb_liq_coh.sqw' (Table_Read_Offset)
Opening input file '/home/nexmap/pkwi/McStas/mcstas/3.x-dev/data/Rb_liq_coh.sqw' (Table_Read_Offset)
Isotropic_Sqw: Sample: Temperature set to T=350 [K]
Isotropic_Sqw: Sample: S(q,w) data from Rb_liq_coh.sqw (coh) assumed to be classical (symmetrised in energy).
Isotropic_Sqw: Sample: Applying exp(hw/2kT) factor with T=350 [K] on Rb_liq_coh.sqw file (classical/symmetric) using 'Frommhold' quantum correction
Isotropic_Sqw: Sample: Generated Rb_liq_coh.sqw coherent Sqw
                   q=[0.1:10 Angs-1] w=[0:101.849 meV] |S|=0.887933 size=[101x10185] sigma=6.32 [barns]
                   normalization factor S(q,w)*0.477012 (auto) \int q^2 S(q) dq=698.369
*** TRACE end *** 

Save [Samples_Isotropic_Sqw]

Finally [Samples_Isotropic_Sqw: 1]. Time: 2 [s] 

Finally [Samples_Isotropic_Sqw: 1]. Time: 2 [s] 

Finally [Samples_Isotropic_Sqw: 1]. Time: 2 [s] 

Finally [Samples_Isotropic_Sqw: 1]. Time: 2 [s] 

Finally [Samples_Isotropic_Sqw: 1]. Time: 2 [s] 

Finally [Samples_Isotropic_Sqw: 1]. Time: 2 [s] 

Finally [Samples_Isotropic_Sqw: 1]. Time: 2 [s] 

Finally [Samples_Isotropic_Sqw: 1]. Time: 2 [s] 
Detector: PSD_I=7.31612e-06 PSD_ERR=3.72719e-09 PSD_N=3.853e+06 "PSD_1727579725.x_y"
Detector: Out_I=2.19436e-06 Out_ERR=8.03429e-10 Out_N=7.99883e+06 "out.dat"
Detector: M_theta_t_I=1.62376e-07 M_theta_t_ERR=2.20661e-10 M_theta_t_N=583196 "M_theta_t_1727579728.t_A"
Detector: M_aw_I=3.22035e-07 M_aw_ERR=3.10741e-10 M_aw_N=1.15643e+06 "M_aw_1727579728.A_E"

Finally [Samples_Isotropic_Sqw: 1]. Time: 2 [s] 
Isotropic_Sqw: Sample: 14520517 neutron events (out of 23926495) that should have
               scattered were transmitted because scattering conditions
WARNING        could not be satisfied after 100 tries.
Isotropic_Sqw: Sample: 102671 neutron events (out of 9405978) reached
WARNING        unrealistic weight. The S(q,w) norm might be too high.
Isotropic_Sqw: Sample: Scattering fraction=0.116519 of incoming intensity
               Absorption fraction           =0.1017
               Single   scattering intensity =2.0298e-06 (coh=1.87151e-06 inc=1.58291e-07)
               Multiple scattering intensity =1.64557e-07

Finally [Samples_Isotropic_Sqw: 1]. Time: 2 [s] 

Finally [Samples_Isotropic_Sqw: 1]. Time: 2 [s] 

Finally [Samples_Isotropic_Sqw: 1]. Time: 2 [s] 

Finally [Samples_Isotropic_Sqw: 1]. Time: 2 [s] 

Finally [Samples_Isotropic_Sqw: 1]. Time: 2 [s] 

Finally [Samples_Isotropic_Sqw: 1]. Time: 2 [s] 

Finally [Samples_Isotropic_Sqw: 1]. Time: 2 [s] 
INFO: Placing instr file copy Samples_Isotropic_Sqw.instr in dataset 1
INFO: Placing generated c-code copy Samples_Isotropic_Sqw.c in dataset 1