INFO: Using directory: "1"
INFO: Using existing c-file: ./Test_MCPL_input.c
INFO: Using existing binary: ./Test_MCPL_input.out
INFO: ===
Using the input file: voutput.mcpl
[Test_MCPL_input] Initialize
Message(vin): MCPL file (voutput.mcpl) produced with McStas 2.3rc12 Test_MCPL_output.
Message(vin): MCPL file (voutput.mcpl) contains 1000 particles.


 Warning: You are using MCPL_input with a repeat_count of 1:
 - Minimum neutron count requested is 1000 x 1 <= 1000 neutrons total

MCPL_input verbose mode - outputting data on the 10 first read neutrons in MCPL units:
OpenACC, preload implicit:
Preload requested, loading MCPLfile in INITIALIZE
Initiating file read...
id=0 pdg=2112	ekin=1.08317e-09 MeV	x=-0.477014 cm	y=-0.134133 cm	z=0 cm	ux=-0.0157156	uy=0.0203137	uz=0.99967	t=0.965926 ms	weight=4.17916e+07	polx=0	poly=0	polz=0
id=1 pdg=2112	ekin=2.1229e-09 MeV	x=0.340445 cm	y=-0.240013 cm	z=0 cm	ux=0.0241563	uy=0.0222911	uz=0.99946	t=0.296989 ms	weight=1.36965e+08	polx=0	poly=0	polz=0
id=2 pdg=2112	ekin=2.7277e-09 MeV	x=-0.315499 cm	y=0.0509962 cm	z=0 cm	ux=0.0109508	uy=0.00701601	uz=0.999915	t=0.381066 ms	weight=1.95868e+08	polx=0	poly=0	polz=0
id=3 pdg=2112	ekin=7.1137e-10 MeV	x=-0.280542 cm	y=0.236746 cm	z=0 cm	ux=-0.0307322	uy=0.016651	uz=0.999389	t=0.0438261 ms	weight=1.75704e+07	polx=0	poly=0	polz=0
id=4 pdg=2112	ekin=7.70002e-10 MeV	x=-0.025928 cm	y=0.0817373 cm	z=0 cm	ux=-0.0298162	uy=0.003234	uz=0.99955	t=0.45319 ms	weight=2.08062e+07	polx=0	poly=0	polz=0
id=5 pdg=2112	ekin=1.05225e-08 MeV	x=-0.277066 cm	y=0.254674 cm	z=0 cm	ux=0.0278653	uy=0.020891	uz=0.999393	t=0.0363826 ms	weight=4.26331e+08	polx=0	poly=0	polz=0
id=6 pdg=2112	ekin=2.55209e-08 MeV	x=0.298835 cm	y=0.217326 cm	z=0 cm	ux=-0.0304247	uy=0.0051656	uz=0.999524	t=0.731502 ms	weight=6.72029e+08	polx=0	poly=0	polz=0
id=7 pdg=2112	ekin=1.64117e-09 MeV	x=0.189569 cm	y=-0.203579 cm	z=0 cm	ux=0.0311654	uy=-0.0242286	uz=0.999221	t=0.0739589 ms	weight=8.99979e+07	polx=0	poly=0	polz=0
id=8 pdg=2112	ekin=2.14939e-09 MeV	x=0.0629534 cm	y=-0.238814 cm	z=0 cm	ux=-0.012252	uy=0.00323298	uz=0.99992	t=0.617501 ms	weight=1.39833e+08	polx=0	poly=0	polz=0
id=9 pdg=2112	ekin=1.03175e-08 MeV	x=-0.145111 cm	y=-0.0295064 cm	z=0 cm	ux=-0.0037271	uy=-0.0474372	uz=0.998867	t=0.283205 ms	weight=4.25662e+08	polx=0	poly=0	polz=0
id=10 pdg=2112	ekin=3.20657e-09 MeV	x=0.388305 cm	y=-0.350874 cm	z=0 cm	ux=-0.000297008	uy=0.0283305	uz=0.999599	t=0.876761 ms	weight=2.38544e+08	polx=0	poly=0	polz=0
Done reading MCPL file, found 1000 neutrons


 Warning: You are using MCPL_input with a repeat_count of 1:
 - Neutron count requested is 1000 x 1 <= 1000 neutrons total

*** TRACE end *** 

Save [Test_MCPL_input]
Detector: m1_I=2.34604e+11 m1_ERR=1.04374e+10 m1_N=1000 "m1_1733292946.L"
Detector: m2_I=2.34604e+11 m2_ERR=1.04374e+10 m2_N=1000 "m2_1733292946.x_y"
Detector: m3_I=2.34604e+11 m3_ERR=1.04374e+10 m3_N=1000 "m3_1733292946.t"
Detector: m4_I=2.34604e+11 m4_ERR=1.04374e+10 m4_N=1000 "m4_1733292946.E"
Events:   "m5_1733292946_list.p.n.E.x.y.z.vx.vy.vz.t"

Finally [Test_MCPL_input: 1]. Time: 1 [s] 
INFO: Placing instr file copy Test_MCPL_input.instr in dataset 1
INFO: Placing generated c-code copy Test_MCPL_input.c in dataset 1