INFO: Using directory: "1"
INFO: Using existing c-file: ./ILL_H25_IN22.c
INFO: Using existing binary: ./ILL_H25_IN22.out
INFO: ===
Instrument: ILL_H25 (H25@ILL thermal guide).
templateTAS: Detailed TAS configuration
* Incoming beam: EI=30.55 [meV] KI=3.84 [Angs-1] Vi=2417.75 [m/s]
* Outgoing beam: EF=30.55 [meV] KF=3.84 [Angs-1] Vf=2417.75 [m/s]
* Transfer:     EN=0 [meV] QM=1 [Angs-1]
Angles: A1=-14.12 A2=-28.24 A3=0 A4=14.96 A5=-14.12 A6=-28.24 [deg]
Monochromator: DM=3.354 [Angs] RMH=0 [m] RMV=0.7089 [m] curved
Analyzer:      DA=3.354 [Angs] RAH=3.644 [m] RAV=0.2168 [m] curved
Sample:        Powder V.lau
ILL_H25_IN22: Incoming wavelength lambda=1.63625 [Angs]
[ILL_H25_IN22] Initialize
Source_gen: component Thermal (square 0.14 x 0.22)
            focusing distance dist=3.18 area=0.038 x 0.2
            spectra 1.612 to 1.661 AA (29.660 to 31.495 meV)
            T1=683.7 K (1.178 AA), T2=257.7 K (1.919 AA), T3=16.7 K (7.539 AA)
  Flux is dPhi/dlambda in [n/s/cm2].
Monitor_nD: GuideOut_dxdy is requesting automatic limits option 'auto' together with OpenACC.
WARNING     this feature is NOT supported using OpenACC and has been disabled!
Opening input file '/u/data/pkwi/McStas/mcstas/3.x-dev/data/HOPG.rfl' (Table_Read_Offset)
Isotropic_Sqw: Sample: is a hollow cylinder: radius=0.010000 thickness=0.005000 height=0.050000 [J Comp Phys 228 (2009) 5251]
Opening input file '/u/data/pkwi/McStas/mcstas/3.x-dev/data/V.lau' (Table_Read_Offset)
Opening input file '/u/data/pkwi/McStas/mcstas/3.x-dev/data/V.lau' (Table_Read_Offset)
Isotropic_sqw: Sample: Powder file probably of type Crystallographica/Fullprof (lau)
WARNING:       but F2 unit is set to powder_barns=1 (barns). Intensity might be 100 times too high.
Isotropic_sqw: Converting 3558 powder lines from V.lau into S(q,w) data
Isotropic_sqw: q range [0:25.0197], creating 423 elements vector
Isotropic_Sqw: Sample: Generated V.lau coherent Sqw
                   q=[0:24.9605 Angs-1] w=[0:0 meV] |S|=0.869429 size=[423x1] sigma=0.01834 [barns]
               Mainly elastic scattering.
Isotropic_Sqw: Sample: Using Isotropic elastic incoherent scattering (sigma=5.07999 [barns])
Isotropic_Sqw: Sample: Sample temperature not defined (T=0).
Warning        Disabling detailed balance.
Reusing input file 'HOPG.rfl' (Table_Read_Offset)
*** TRACE end *** 

Save [ILL_H25_IN22]
Detector: GuideOut_xy_I=1.67241e+07 GuideOut_xy_ERR=45594.8 GuideOut_xy_N=435675 "GuideOut_xy_1732331036.x_y"
Detector: GuideOut_dxdy_I=1.67241e+07 GuideOut_dxdy_ERR=45594.8 GuideOut_dxdy_N=435675 "GuideOut_dxdy_1732331036.hd_vd"
Detector: GuideOut_Phic_I=1.52146e+07 GuideOut_Phic_ERR=41473.3 GuideOut_Phic_N=435675 "GuideOut_Phic.dat"
Detector: GuideOut_L_I=1.67241e+07 GuideOut_L_ERR=45594.8 GuideOut_L_N=435675 "GuideOut_L_1732331036.L"
Detector: D4_SC2_1D_I=8.41775e+08 D4_SC2_1D_ERR=1.13342e+06 D4_SC2_1D_N=1.22605e+06 "D4_SC2_1D_1732331036.L"
Detector: Sample_Cradle_I=4.65259e+07 Sample_Cradle_ERR=64895.3 Sample_Cradle_N=1.09089e+06 "Sample_Cradle.dat"
Detector: D7_SC3_1D_I=1.88305e+08 D7_SC3_1D_ERR=263624 D7_SC3_1D_N=9.9114e+06 "D7_SC3_1D_1732331036.th_E"
Detector: He3H_I=203.242 He3H_ERR=3.23643 He3H_N=21384 "He3H.psd"

Finally [ILL_H25_IN22: 1]. Time: 14 [s] 
Isotropic_Sqw: Sample: 2 neutron events (out of 3668704) that should have
               scattered were transmitted because scattering conditions
WARNING        could not be satisfied after 100 tries.
Isotropic_Sqw: Sample: Scattering fraction=0.286267 of incoming intensity
               Absorption fraction           =0.469096
               Single   scattering intensity =1.72193e+06 (coh=5888.69 inc=1.71604e+06)
               Multiple scattering intensity =0
INFO: Placing instr file copy ILL_H25_IN22.instr in dataset 1
INFO: Placing generated c-code copy ILL_H25_IN22.c in dataset 1