INFO: Using directory: "1"
INFO: Using existing c-file: ./ILL_H13_IN20.c
INFO: Using existing binary: ./ILL_H13_IN20.out
INFO: ===
templateTAS: Detailed TAS configuration
* Incoming beam: EI=18.65 [meV] KI=3 [Angs-1] Vi=1888.87 [m/s]
* Outgoing beam: EF=18.65 [meV] KF=3 [Angs-1] Vf=1888.87 [m/s]
* Transfer:     EN=0 [meV] QM=1 [Angs-1]
Angles: A1=19.39 A2=38.77 A3=0 A4=-19.19 A5=19.39 A6=38.77 [deg]
Monochromator: DM=3.155 [Angs] RMH=6.655 [m] RMV=0.7332 [m] curved
Analyzer:      DA=3.155 [Angs] RAH=2.876 [m] RAV=0.3168 [m] curved
Sample:        Powder V.lau
[ILL_H13_IN20] Initialize
Isotropic_Sqw: Sample: is a hollow cylinder: radius=0.010000 thickness=0.005000 height=0.050000 [J Comp Phys 228 (2009) 5251]
Opening input file '/u/data/pkwi/McStas/mcstas/3.x-dev/data/V.lau' (Table_Read_Offset)
Opening input file '/u/data/pkwi/McStas/mcstas/3.x-dev/data/V.lau' (Table_Read_Offset)
Isotropic_sqw: Sample: Powder file probably of type Crystallographica/Fullprof (lau)
WARNING:       but F2 unit is set to powder_barns=1 (barns). Intensity might be 100 times too high.
Isotropic_sqw: Converting 3558 powder lines from V.lau into S(q,w) data
Isotropic_sqw: q range [0:25.0197], creating 423 elements vector
Isotropic_Sqw: Sample: Generated V.lau coherent Sqw
                   q=[0:24.9605 Angs-1] w=[0:0 meV] |S|=0.869429 size=[423x1] sigma=0.01834 [barns]
               Mainly elastic scattering.
Isotropic_Sqw: Sample: Using Isotropic elastic incoherent scattering (sigma=5.07999 [barns])
Isotropic_Sqw: Sample: Sample temperature not defined (T=0).
Warning        Disabling detailed balance.
*** TRACE end *** 

Save [ILL_H13_IN20]
Detector: D4_SC2_1D_I=5.25975e+09 D4_SC2_1D_ERR=3.03105e+06 D4_SC2_1D_N=4.52803e+06 "D4_SC2_1D_1732158222.L"
Detector: Sample_Cradle_I=5.40166e+07 Sample_Cradle_ERR=78611.9 Sample_Cradle_N=987450 "Sample_Cradle.dat"
Detector: D7_SC3_1D_I=4.6691e+08 D7_SC3_1D_ERR=388297 D7_SC3_1D_N=1.58402e+07 "D7_SC3_1D_1732158222.th_E"
Detector: He3H_I=246.473 He3H_ERR=2.58083 He3H_N=35951 "He3H.psd"

Finally [ILL_H13_IN20: 1]. Time: 11 [s] 
Isotropic_Sqw: Sample: 62 neutron events (out of 5483987) that should have
               scattered were transmitted because scattering conditions
WARNING        could not be satisfied after 100 tries.
Isotropic_Sqw: Sample: Scattering fraction=0.284339 of incoming intensity
               Absorption fraction           =0.533127
               Single   scattering intensity =2.09231e+06 (coh=5737.46 inc=2.08657e+06)
               Multiple scattering intensity =0
INFO: Placing instr file copy ILL_H13_IN20.instr in dataset 1
INFO: Placing generated c-code copy ILL_H13_IN20.c in dataset 1