INFO: Using directory: "1" INFO: Using existing c-file: ./HZB_FLEX.c INFO: Using existing binary: ./HZB_FLEX.out INFO: === Component: elliptical_piece (Guide_tapering) Height at the guide exit (h2): 0.125000 Component: elliptical_piece (Guide_tapering) Width at the guide exit (w2): 0.030412 monochromator angles are: A1=-37.166, A2=-74.332 [deg] radius of curvature RMH= -3.269 [m] radius of curvature RMV= -2.386 [m] sample angles are: A3= 0.000, A4= 70.000 [deg] analyser angles are: A5=-37.166, A6=-74.332 [deg] radius of curvature RAH= -1.655 [m] radius of curvature RAV= -0.813 [m] velocity selector frequency is 213.618 [Hz] lambda= 4.054 [A] kI= 1.550 [A^-1] EI= 4.978 [meV] Maxwellian source forced to emit only between l_min= 3.958 and l_max= 4.149 [A] in order to save simulation time correspondingly, the energy monitors at sample position are detecting between 4.752 and 5.222 [meV] [HZB_FLEX] Initialize *** TRACE end *** Save [HZB_FLEX] Detector: Before_selec_I=2.96927e+07 Before_selec_ERR=43839 Before_selec_N=828068 "PSD_monitor_before.dat" Detector: After_selec_I=2.03618e+07 After_selec_ERR=36316.9 After_selec_N=483960 "PSD_monitor_after.dat" Detector: energy_endguide_I=1.32513e+07 energy_endguide_ERR=28069.9 energy_endguide_N=328235 "energy-endguide.dat" : 4.9809 meV , E-width : 0.153121 meV Detector: energy_mono_I=4.32213e+06 energy_mono_ERR=16038.9 energy_mono_N=106222 "energy-mono.dat" : 4.97828 meV , E-width : 0.090523 meV Detector: energy_pre_sample_I=3.65287e+06 energy_pre_sample_ERR=14939.6 energy_pre_sample_N=76886 "energy-pre-sample.dat" : 4.97679 meV , E-width : 0.0947637 meV Detector: div_mono_I=4.06442e+06 div_mono_ERR=15646 div_mono_N=90703 "div-sample.dat" Detector: div_mono_H_I=353005 div_mono_H_ERR=4582.05 div_mono_H_N=8794 "H-div-sample.dat" Detector: psd_sam_I=4.33751e+06 psd_sam_ERR=16055.6 psd_sam_N=107405 "psd-sam.dat" Detector: dpsd1_I=4.33751e+06 dpsd1_ERR=16055.6 dpsd1_N=107405 "linpsdsam.dat" Finally [HZB_FLEX: 1]. Time: 7 [s] INFO: Placing instr file copy HZB_FLEX.instr in dataset 1 INFO: Placing generated c-code copy HZB_FLEX.c in dataset 1