INFO: Using directory: "1"
INFO: Using existing c-file: ./templateTAS.c
INFO: Using existing binary: ./templateTAS.out
INFO: ===
templateTAS: Detailed TAS configuration
* Incoming beam: EI=14.68 [meV] KI=2.662 [Angs-1] Vi=1676.05 [m/s]
* Outgoing beam: EF=14.68 [meV] KF=2.662 [Angs-1] Vf=1676.05 [m/s]
* Transfer:     EN=0 [meV] QM=1 [Angs-1]
Angles: A1=20.6 A2=41.2 A3=0 A4=-21.65 A5=20.6 A6=41.2 [deg]
Monochromator: DM=3.354 [Angs] RMH=0 [m] RMV=1.198 [m] curved
Analyzer:      DA=3.354 [Angs] RAH=2.713 [m] RAV=0 [m] curved
Sample:        Powder V.lau
[templateTAS] Initialize
Opening input file '/u/data/pkwi/McStas/mcstas/3.x-dev/data/HOPG.rfl' (Table_Read_Offset)
Isotropic_Sqw: Sample: is a hollow cylinder: radius=0.010000 thickness=0.005000 height=0.050000 [J Comp Phys 228 (2009) 5251]
Opening input file '/u/data/pkwi/McStas/mcstas/3.x-dev/data/V.lau' (Table_Read_Offset)
Opening input file '/u/data/pkwi/McStas/mcstas/3.x-dev/data/V.lau' (Table_Read_Offset)
Isotropic_sqw: Sample: Powder file probably of type Crystallographica/Fullprof (lau)
WARNING:       but F2 unit is set to powder_barns=1 (barns). Intensity might be 100 times too high.
Isotropic_sqw: Converting 3558 powder lines from V.lau into S(q,w) data
Isotropic_sqw: q range [0:25.0197], creating 423 elements vector
Isotropic_Sqw: Sample: Generated V.lau coherent Sqw
                   q=[0:24.9605 Angs-1] w=[0:0 meV] |S|=0.869429 size=[423x1] sigma=0.01834 [barns]
               Mainly elastic scattering.
Isotropic_Sqw: Sample: Using Isotropic elastic incoherent scattering (sigma=5.07999 [barns])
Isotropic_Sqw: Sample: Sample temperature not defined (T=0).
Warning        Disabling detailed balance.
Reusing input file 'HOPG.rfl' (Table_Read_Offset)
*** TRACE end *** 

Save [templateTAS]
Detector: D4_SC2_1D_I=1.2941e+09 D4_SC2_1D_ERR=397083 D4_SC2_1D_N=1.11407e+07 "D4_SC2_1D_1734867934.L"
Detector: Sample_Cradle_I=3.2845e+07 Sample_Cradle_ERR=15660.4 Sample_Cradle_N=5.47486e+06 "Sample_Cradle.dat"
Detector: D7_SC3_1D_I=2.94804e+08 D7_SC3_1D_ERR=75262.5 D7_SC3_1D_N=8.15479e+07 "D7_SC3_1D_1734867934.th_E"
Detector: He3H_I=278.857 He3H_ERR=0.942785 He3H_N=194436 "He3H.psd"

Finally [templateTAS: 1]. Time: 26 [s] 
Isotropic_Sqw: Sample: 689 neutron events (out of 16024017) that should have
               scattered were transmitted because scattering conditions
WARNING        could not be satisfied after 100 tries.
Isotropic_Sqw: Sample: Scattering fraction=0.259689 of incoming intensity
               Absorption fraction           =0.560865
               Single   scattering intensity =983741 (coh=4429.65 inc=979311)
               Multiple scattering intensity =0
INFO: Placing instr file copy templateTAS.instr in dataset 1
INFO: Placing generated c-code copy templateTAS.c in dataset 1