INFO: Using directory: "1" INFO: Using existing c-file: ./Test_Pol_Tabled.c INFO: Using existing binary: ./Test_Pol_Tabled.out INFO: === Simulation 'Test_Pol_Tabled' (/home/nexmap/pkwi/TESTS/2024-11-23/ANTLR_mpi_x_16_1e7_Linux_1e7/Test_Pol_Tabled/Test_Pol_Tabled.instr): running on 16 nodes (master is 'elearn1.fysik.dtu.dk', MPI version 3.1). [Test_Pol_Tabled] Initialize INFO: Set_pol(setpol): Setting polarization to (0.000000, 1.000000, 0.000000) [Test_Pol_Tabled] Initialize INFO: Set_pol(setpol): Setting polarization to (0.000000, 1.000000, 0.000000) [Test_Pol_Tabled] Initialize INFO: Set_pol(setpol): Setting polarization to (0.000000, 1.000000, 0.000000) [Test_Pol_Tabled] Initialize INFO: Set_pol(setpol): Setting polarization to (0.000000, 1.000000, 0.000000) [Test_Pol_Tabled] Initialize [Test_Pol_Tabled] Initialize INFO: Set_pol(setpol): Setting polarization to (0.000000, 1.000000, 0.000000) [Test_Pol_Tabled] Initialize INFO: Set_pol(setpol): Setting polarization to (0.000000, 1.000000, 0.000000) [Test_Pol_Tabled] Initialize INFO: Set_pol(setpol): Setting polarization to (0.000000, 1.000000, 0.000000) INFO: Set_pol(setpol): Setting polarization to (0.000000, 1.000000, 0.000000) [Test_Pol_Tabled] Initialize INFO: Set_pol(setpol): Setting polarization to (0.000000, 1.000000, 0.000000) [Test_Pol_Tabled] Initialize INFO: Set_pol(setpol): Setting polarization to (0.000000, 1.000000, 0.000000) [Test_Pol_Tabled] Initialize INFO: Set_pol(setpol): Setting polarization to (0.000000, 1.000000, 0.000000) [Test_Pol_Tabled] Initialize INFO: Set_pol(setpol): Setting polarization to (0.000000, 1.000000, 0.000000) [Test_Pol_Tabled] Initialize INFO: Set_pol(setpol): Setting polarization to (0.000000, 1.000000, 0.000000) [Test_Pol_Tabled] Initialize INFO: Set_pol(setpol): Setting polarization to (0.000000, 1.000000, 0.000000) [Test_Pol_Tabled] Initialize INFO: Set_pol(setpol): Setting polarization to (0.000000, 1.000000, 0.000000) [Test_Pol_Tabled] Initialize INFO: Set_pol(setpol): Setting polarization to (0.000000, 1.000000, 0.000000) Opening input file 'flipfield.dat' (Table_Read_Offset) interpolator_load: Axis 0: step=0.05, unique values=5, from file 'flipfield.dat'. interpolator_load: Axis 1: step=0.05, unique values=5, from file 'flipfield.dat'. interpolator_load: Axis 0: step=0.05, unique values=5, from file 'flipfield.dat'. interpolator_load: Axis 1: step=0.05, unique values=5, from file 'flipfield.dat'. interpolator_load: Axis 2: step=0.111111, unique values=10, from file 'flipfield.dat'. interpolator_load: Axis 2: step=0.111111, unique values=10, from file 'flipfield.dat'. interpolator_load: allocating 2.32831e-07 Gb for dim=0 interpolator_load: allocating 2.32831e-07 Gb for dim=1 interpolator_load: allocating 2.32831e-07 Gb for dim=2 interpolator_load: allocating 2.32831e-07 Gb for dim=0 interpolator_load: allocating 2.32831e-07 Gb for dim=1 interpolator_load: allocating 2.32831e-07 Gb for dim=2 interpolator_load: Axis 0: step=0.05, unique values=5, from file 'flipfield.dat'. interpolator_load: Axis 1: step=0.05, unique values=5, from file 'flipfield.dat'. interpolator_load: Axis 2: step=0.111111, unique values=10, from file 'flipfield.dat'. interpolator_load: Axis 0: step=0.05, unique values=5, from file 'flipfield.dat'. interpolator_load: Axis 1: step=0.05, unique values=5, from file 'flipfield.dat'. interpolator_load: Axis 2: step=0.111111, unique values=10, from file 'flipfield.dat'. interpolator_load: allocating 2.32831e-07 Gb for dim=0 interpolator_load: Axis 0: step=0.05, unique values=5, from file 'flipfield.dat'. interpolator_load: Axis 1: step=0.05, unique values=5, from file 'flipfield.dat'. interpolator_load: Axis 0: step=0.05, unique values=5, from file 'flipfield.dat'. interpolator_load: Axis 1: step=0.05, unique values=5, from file 'flipfield.dat'. interpolator_load: Axis 2: step=0.111111, unique values=10, from file 'flipfield.dat'. interpolator_load: allocating 2.32831e-07 Gb for dim=0 interpolator_load: Axis 0: step=0.05, unique values=5, from file 'flipfield.dat'. interpolator_load: Axis 1: step=0.05, unique values=5, from file 'flipfield.dat'. interpolator_load: Axis 2: step=0.111111, unique values=10, from file 'flipfield.dat'. interpolator_load: allocating 2.32831e-07 Gb for dim=0 interpolator_load: allocating 2.32831e-07 Gb for dim=0 interpolator_load: allocating 2.32831e-07 Gb for dim=1 interpolator_load: allocating 2.32831e-07 Gb for dim=2 interpolator_load: Axis 0: step=0.05, unique values=5, from file 'flipfield.dat'. interpolator_load: Axis 1: step=0.05, unique values=5, from file 'flipfield.dat'. interpolator_load: Axis 2: step=0.111111, unique values=10, from file 'flipfield.dat'. interpolator_load: allocating 2.32831e-07 Gb for dim=0 interpolator_load: Axis 0: step=0.05, unique values=5, from file 'flipfield.dat'. interpolator_load: Axis 1: step=0.05, unique values=5, from file 'flipfield.dat'. interpolator_load: Axis 0: step=0.05, unique values=5, from file 'flipfield.dat'. interpolator_load: Axis 1: step=0.05, unique values=5, from file 'flipfield.dat'. interpolator_load: Axis 0: step=0.05, unique values=5, from file 'flipfield.dat'. interpolator_load: Axis 1: step=0.05, unique values=5, from file 'flipfield.dat'. interpolator_load: Axis 2: step=0.111111, unique values=10, from file 'flipfield.dat'. interpolator_load: Axis 0: step=0.05, unique values=5, from file 'flipfield.dat'. interpolator_load: Axis 1: step=0.05, unique values=5, from file 'flipfield.dat'. interpolator_load: Axis 2: step=0.111111, unique values=10, from file 'flipfield.dat'. interpolator_load: allocating 2.32831e-07 Gb for dim=0 interpolator_load: allocating 2.32831e-07 Gb for dim=1 interpolator_load: allocating 2.32831e-07 Gb for dim=2 interpolator_load: Axis 2: step=0.111111, unique values=10, from file 'flipfield.dat'. interpolator_load: allocating 2.32831e-07 Gb for dim=0 interpolator_load: allocating 2.32831e-07 Gb for dim=1 interpolator_load: allocating 2.32831e-07 Gb for dim=2 interpolator_load: allocating 2.32831e-07 Gb for dim=1 interpolator_load: allocating 2.32831e-07 Gb for dim=2 interpolator_load: allocating 2.32831e-07 Gb for dim=1 interpolator_load: allocating 2.32831e-07 Gb for dim=2 interpolator_load: Axis 0: step=0.05, unique values=5, from file 'flipfield.dat'. interpolator_load: Axis 1: step=0.05, unique values=5, from file 'flipfield.dat'. interpolator_load: Axis 2: step=0.111111, unique values=10, from file 'flipfield.dat'. interpolator_load: allocating 2.32831e-07 Gb for dim=0 interpolator_load: allocating 2.32831e-07 Gb for dim=1 interpolator_load: allocating 2.32831e-07 Gb for dim=2 interpolator_load: Axis 0: step=0.05, unique values=5, from file 'flipfield.dat'. interpolator_load: Axis 1: step=0.05, unique values=5, from file 'flipfield.dat'. interpolator_load: Axis 2: step=0.111111, unique values=10, from file 'flipfield.dat'. interpolator_load: allocating 2.32831e-07 Gb for dim=0 interpolator_load: Axis 2: step=0.111111, unique values=10, from file 'flipfield.dat'. interpolator_load: allocating 2.32831e-07 Gb for dim=0 interpolator_load: allocating 2.32831e-07 Gb for dim=1 interpolator_load: allocating 2.32831e-07 Gb for dim=2 interpolator_load: Axis 2: step=0.111111, unique values=10, from file 'flipfield.dat'. interpolator_load: allocating 2.32831e-07 Gb for dim=0 interpolator_load: allocating 2.32831e-07 Gb for dim=1 interpolator_load: allocating 2.32831e-07 Gb for dim=2 interpolator_load: Axis 0: step=0.05, unique values=5, from file 'flipfield.dat'. interpolator_load: Axis 1: step=0.05, unique values=5, from file 'flipfield.dat'. interpolator_load: Axis 2: step=0.111111, unique values=10, from file 'flipfield.dat'. interpolator_load: allocating 2.32831e-07 Gb for dim=0 interpolator_load: allocating 2.32831e-07 Gb for dim=1 interpolator_load: allocating 2.32831e-07 Gb for dim=2 interpolator_load: allocating 2.32831e-07 Gb for dim=0 interpolator_load: allocating 2.32831e-07 Gb for dim=1 interpolator_load: allocating 2.32831e-07 Gb for dim=2 interpolator_load: Axis 0: step=0.05, unique values=5, from file 'flipfield.dat'. interpolator_load: Axis 1: step=0.05, unique values=5, from file 'flipfield.dat'. interpolator_load: Axis 2: step=0.111111, unique values=10, from file 'flipfield.dat'. interpolator_load: allocating 2.32831e-07 Gb for dim=0 interpolator_load: allocating 2.32831e-07 Gb for dim=1 interpolator_load: allocating 2.32831e-07 Gb for dim=2 interpolator_load: allocating 2.32831e-07 Gb for dim=1 interpolator_load: allocating 2.32831e-07 Gb for dim=2 interpolator: file 'flipfield.dat' with 250 points. Space is 3D, Field is 3D. Using method 'regular'. interpolator_load: allocating 2.32831e-07 Gb for dim=1 interpolator_load: allocating 2.32831e-07 Gb for dim=2 interpolator_load: allocating 2.32831e-07 Gb for dim=1 interpolator_load: allocating 2.32831e-07 Gb for dim=2 *** TRACE end *** Save [Test_Pol_Tabled] Detector: pol_0_I=1 pol_0_ERR=0.00504975 pol_0_N=1e+07 "pol_0.dat" Detector: polx_0_I=0.0501575 polx_0_ERR=1.58612e-05 polx_0_N=1e+07 "polx_0.dat" Detector: poly_0_I=0.0501575 poly_0_ERR=1.58612e-05 poly_0_N=1e+07 "poly_0.dat" Detector: polz_0_I=0.0501575 polz_0_ERR=1.58612e-05 polz_0_N=1e+07 "polz_0.dat" Detector: lmon_0_I=0.0501575 lmon_0_ERR=1.58612e-05 lmon_0_N=1e+07 "lmon_0.dat" Detector: polx_6_I=0.0501575 polx_6_ERR=1.58612e-05 polx_6_N=1e+07 "polx_6.dat" Detector: pol_6_I=1 pol_6_ERR=0.00504975 pol_6_N=1e+07 "pol_6.dat" Finally [Test_Pol_Tabled: 1]. Time: 10 [s] Finally [Test_Pol_Tabled: 1]. Time: 10 [s] Finally [Test_Pol_Tabled: 1]. Time: 10 [s] Finally [Test_Pol_Tabled: 1]. Time: 10 [s] Finally [Test_Pol_Tabled: 1]. Time: 10 [s] Finally [Test_Pol_Tabled: 1]. Time: 10 [s] Finally [Test_Pol_Tabled: 1]. Time: 10 [s] Finally [Test_Pol_Tabled: 1]. Time: 10 [s] Finally [Test_Pol_Tabled: 1]. Time: 10 [s] Finally [Test_Pol_Tabled: 1]. Time: 10 [s] Finally [Test_Pol_Tabled: 1]. Time: 10 [s] Finally [Test_Pol_Tabled: 1]. Time: 10 [s] Detector: lmon_6_I=0.0501575 lmon_6_ERR=1.58612e-05 lmon_6_N=1e+07 "lmon_6.dat" Finally [Test_Pol_Tabled: 1]. Time: 10 [s] Finally [Test_Pol_Tabled: 1]. Time: 10 [s] Finally [Test_Pol_Tabled: 1]. Time: 10 [s] Finally [Test_Pol_Tabled: 1]. Time: 10 [s] INFO: Placing instr file copy Test_Pol_Tabled.instr in dataset 1 INFO: Placing generated c-code copy Test_Pol_Tabled.c in dataset 1