INFO: Using directory: "1" INFO: Using existing c-file: ./ILL_H22_D1A.c INFO: Using existing binary: ./ILL_H22_D1A.out INFO: === Simulation 'ILL_H22_D1A' (/home/nexmap/pkwi/TESTS/2024-11-23/ANTLR_mpi_x_16_1e7_Linux_1e7/ILL_H22_D1A/ILL_H22_D1A.instr): running on 16 nodes (master is 'elearn1.fysik.dtu.dk', MPI version 3.1). ILL_H22_D1A: Detailed DIF configuration * Incoming beam: lambda=1.911 [Angs] EI=22.4 [meV] KI=3.288 [Angs-1] Vi=2070.14 [m/s] * Monochromator: DM=1.092 [Angs] RV=2.187 [m] curved, take-off A2=-122 [deg] * Sample: Na2Ca3Al2F14.laz in V.laz cylinder container Instrument: ILL_H22 (H22@ILL thermal guide). ILL_H22_D1A: Detailed DIF configuration * Incoming beam: lambda=1.911 [Angs] EI=22.4 [meV] KI=3.288 [Angs-1] Vi=2070.14 [m/s] * Monochromator: DM=1.092 [Angs] RV=2.187 [m] curved, take-off A2=-122 [deg] * Sample: Na2Ca3Al2F14.laz in V.laz cylinder container Instrument: ILL_H22 (H22@ILL thermal guide). ILL_H22_D1A: Detailed DIF configuration * Incoming beam: lambda=1.911 [Angs] EI=22.4 [meV] KI=3.288 [Angs-1] Vi=2070.14 [m/s] * Monochromator: DM=1.092 [Angs] RV=2.187 [m] curved, take-off A2=-122 [deg] * Sample: Na2Ca3Al2F14.laz in V.laz cylinder container Instrument: ILL_H22 (H22@ILL thermal guide). ILL_H22_D1A: Detailed DIF configuration * Incoming beam: lambda=1.911 [Angs] EI=22.4 [meV] KI=3.288 [Angs-1] Vi=2070.14 [m/s] * Monochromator: DM=1.092 [Angs] RV=2.187 [m] curved, take-off A2=-122 [deg] * Sample: Na2Ca3Al2F14.laz in V.laz cylinder container Instrument: ILL_H22 (H22@ILL thermal guide). ILL_H22_D1A: Detailed DIF configuration * Incoming beam: lambda=1.911 [Angs] EI=22.4 [meV] KI=3.288 [Angs-1] Vi=2070.14 [m/s] * Monochromator: DM=1.092 [Angs] RV=2.187 [m] curved, take-off A2=-122 [deg] * Sample: Na2Ca3Al2F14.laz in V.laz cylinder container Instrument: ILL_H22 (H22@ILL thermal guide). ILL_H22_D1A: Detailed DIF configuration * Incoming beam: lambda=1.911 [Angs] EI=22.4 [meV] KI=3.288 [Angs-1] Vi=2070.14 [m/s] * Monochromator: DM=1.092 [Angs] RV=2.187 [m] curved, take-off A2=-122 [deg] * Sample: Na2Ca3Al2F14.laz in V.laz cylinder container Instrument: ILL_H22 (H22@ILL thermal guide). ILL_H22_D1A: Detailed DIF configuration * Incoming beam: lambda=1.911 [Angs] EI=22.4 [meV] KI=3.288 [Angs-1] Vi=2070.14 [m/s] * Monochromator: DM=1.092 [Angs] RV=2.187 [m] curved, take-off A2=-122 [deg] * Sample: Na2Ca3Al2F14.laz in V.laz cylinder container Instrument: ILL_H22 (H22@ILL thermal guide). ILL_H22_D1A: Detailed DIF configuration * Incoming beam: lambda=1.911 [Angs] EI=22.4 [meV] KI=3.288 [Angs-1] Vi=2070.14 [m/s] * Monochromator: DM=1.092 [Angs] RV=2.187 [m] curved, take-off A2=-122 [deg] * Sample: Na2Ca3Al2F14.laz in V.laz cylinder container Instrument: ILL_H22 (H22@ILL thermal guide). ILL_H22_D1A: Detailed DIF configuration * Incoming beam: lambda=1.911 [Angs] EI=22.4 [meV] KI=3.288 [Angs-1] Vi=2070.14 [m/s] * Monochromator: DM=1.092 [Angs] RV=2.187 [m] curved, take-off A2=-122 [deg] * Sample: Na2Ca3Al2F14.laz in V.laz cylinder container Instrument: ILL_H22 (H22@ILL thermal guide). ILL_H22_D1A: Detailed DIF configuration * Incoming beam: lambda=1.911 [Angs] EI=22.4 [meV] KI=3.288 [Angs-1] Vi=2070.14 [m/s] * Monochromator: DM=1.092 [Angs] RV=2.187 [m] curved, take-off A2=-122 [deg] * Sample: Na2Ca3Al2F14.laz in V.laz cylinder container Instrument: ILL_H22 (H22@ILL thermal guide). ILL_H22_D1A: Detailed DIF configuration * Incoming beam: lambda=1.911 [Angs] EI=22.4 [meV] KI=3.288 [Angs-1] Vi=2070.14 [m/s] * Monochromator: DM=1.092 [Angs] RV=2.187 [m] curved, take-off A2=-122 [deg] * Sample: Na2Ca3Al2F14.laz in V.laz cylinder container Instrument: ILL_H22 (H22@ILL thermal guide). ILL_H22_D1A: Detailed DIF configuration * Incoming beam: lambda=1.911 [Angs] EI=22.4 [meV] KI=3.288 [Angs-1] Vi=2070.14 [m/s] * Monochromator: DM=1.092 [Angs] RV=2.187 [m] curved, take-off A2=-122 [deg] * Sample: Na2Ca3Al2F14.laz in V.laz cylinder container Instrument: ILL_H22 (H22@ILL thermal guide). ILL_H22_D1A: Detailed DIF configuration * Incoming beam: lambda=1.911 [Angs] EI=22.4 [meV] KI=3.288 [Angs-1] Vi=2070.14 [m/s] * Monochromator: DM=1.092 [Angs] RV=2.187 [m] curved, take-off A2=-122 [deg] * Sample: Na2Ca3Al2F14.laz in V.laz cylinder container Instrument: ILL_H22 (H22@ILL thermal guide). ILL_H22_D1A: Detailed DIF configuration * Incoming beam: lambda=1.911 [Angs] EI=22.4 [meV] KI=3.288 [Angs-1] Vi=2070.14 [m/s] * Monochromator: DM=1.092 [Angs] RV=2.187 [m] curved, take-off A2=-122 [deg] * Sample: Na2Ca3Al2F14.laz in V.laz cylinder container Instrument: ILL_H22 (H22@ILL thermal guide). ILL_H22_D1A: Detailed DIF configuration * Incoming beam: lambda=1.911 [Angs] EI=22.4 [meV] KI=3.288 [Angs-1] Vi=2070.14 [m/s] * Monochromator: DM=1.092 [Angs] RV=2.187 [m] curved, take-off A2=-122 [deg] * Sample: Na2Ca3Al2F14.laz in V.laz cylinder container Instrument: ILL_H22 (H22@ILL thermal guide). ILL_H22_D1A: Detailed DIF configuration * Incoming beam: lambda=1.911 [Angs] EI=22.4 [meV] KI=3.288 [Angs-1] Vi=2070.14 [m/s] * Monochromator: DM=1.092 [Angs] RV=2.187 [m] curved, take-off A2=-122 [deg] * Sample: Na2Ca3Al2F14.laz in V.laz cylinder container Instrument: ILL_H22 (H22@ILL thermal guide). [ILL_H22_D1A] Initialize [ILL_H22_D1A] Initialize [ILL_H22_D1A] Initialize [ILL_H22_D1A] Initialize [ILL_H22_D1A] Initialize [ILL_H22_D1A] Initialize [ILL_H22_D1A] Initialize [ILL_H22_D1A] Initialize [ILL_H22_D1A] Initialize [ILL_H22_D1A] Initialize [ILL_H22_D1A] Initialize [ILL_H22_D1A] Initialize WARNING(Environment_in): p_inc=0, adjusting to 0.01, to avoid algorithm instability WARNING(Environment_in): p_inc=0, adjusting to 0.01, to avoid algorithm instability WARNING(Environment_in): p_inc=0, adjusting to 0.01, to avoid algorithm instability WARNING(Environment_in): p_inc=0, adjusting to 0.01, to avoid algorithm instability WARNING(Environment_in): p_inc=0, adjusting to 0.01, to avoid algorithm instability WARNING(Environment_in): p_inc=0, adjusting to 0.01, to avoid algorithm instability WARNING(Environment_in): p_inc=0, adjusting to 0.01, to avoid algorithm instability WARNING(Environment_in): p_inc=0, adjusting to 0.01, to avoid algorithm instability WARNING(Environment_in): p_inc=0, adjusting to 0.01, to avoid algorithm instability WARNING(Environment_in): p_inc=0, adjusting to 0.01, to avoid algorithm instability WARNING(Environment_in): p_inc=0, adjusting to 0.01, to avoid algorithm instability WARNING(Environment_in): p_inc=0, adjusting to 0.01, to avoid algorithm instability [ILL_H22_D1A] Initialize [ILL_H22_D1A] Initialize [ILL_H22_D1A] Initialize [ILL_H22_D1A] Initialize Source_gen: component Thermal (square 0.14 x 0.22) focusing distance dist=3.18 area=0.038 x 0.2 spectra 1.881 to 1.941 AA (21.715 to 23.122 meV) T1=683.7 K (1.178 AA), T2=257.7 K (1.919 AA), T3=16.7 K (7.539 AA) Flux is dPhi/dlambda in [n/s/cm2]. WARNING(Environment_in): p_inc=0, adjusting to 0.01, to avoid algorithm instability WARNING(Environment_in): p_inc=0, adjusting to 0.01, to avoid algorithm instability WARNING(Environment_in): p_inc=0, adjusting to 0.01, to avoid algorithm instability Monitor_nD: GuideOut_dxdy is using automatic limits option 'auto' together with MPI. WARNING this may create incorrect distributions (but integrated flux will be right). Monitor_nD: D1A_Mono_Dx is using automatic limits option 'auto' together with MPI. WARNING this may create incorrect distributions (but integrated flux will be right). Monitor_nD: Lmon is using automatic limits option 'auto' together with MPI. WARNING this may create incorrect distributions (but integrated flux will be right). WARNING(Environment_in): p_inc=0, adjusting to 0.01, to avoid algorithm instability PowderN: Environment_in: Concentric mode - remember to include the 'opposite' copy of this component ! WARNING The equivalent, 'opposite' comp should have concentric=0 Opening input file '/home/nexmap/pkwi/McStas/mcstas/3.x-dev/data/Al.laz' (Table_Read_Offset) Table from file 'Al.laz' (block 1) is 26 x 18 (x=1:8), constant step. interpolation: linear '# TITLE *Aluminum-Al-[FM3-M] Miller, H.P.jr.;DuMond, J.W.M.[1942] at 298 K; ...' PowderN: Environment_in: Reading 26 rows from Al.laz PowderN: Environment_in: Read 26 reflections from file 'Al.laz' PowderN: Environment_in: Vc=66.4 [Angs] sigma_abs=0.924 [barn] sigma_inc=0.0328 [barn] reflections=Al.laz PowderN: Container_in: Concentric mode - remember to include the 'opposite' copy of this component ! WARNING The equivalent, 'opposite' comp should have concentric=0 Opening input file '/home/nexmap/pkwi/McStas/mcstas/3.x-dev/data/V.laz' (Table_Read_Offset) Table from file 'V.laz' (block 1) is 21 x 18 (x=1:6), constant step. interpolation: linear '# TITLE *-V-[IM3-M] James, W.J.;Straumanis, M.E.[1960];# CELL 3.024100 3.02 ...' PowderN: Container_in: Reading 21 rows from V.laz PowderN: Container_in: Read 21 reflections from file 'V.laz' PowderN: Container_in: Vc=27.66 [Angs] sigma_abs=10.16 [barn] sigma_inc=9.87 [barn] reflections=V.laz Opening input file '/home/nexmap/pkwi/McStas/mcstas/3.x-dev/data/Na2Ca3Al2F14.laz' (Table_Read_Offset) WARNING(Environment_out): p_inc=0, adjusting to 0.01, to avoid algorithm instability WARNING(Environment_out): p_inc=0, adjusting to 0.01, to avoid algorithm instability WARNING(Environment_out): p_inc=0, adjusting to 0.01, to avoid algorithm instability WARNING(Environment_out): p_inc=0, adjusting to 0.01, to avoid algorithm instability WARNING(Environment_out): p_inc=0, adjusting to 0.01, to avoid algorithm instability WARNING(Environment_out): p_inc=0, adjusting to 0.01, to avoid algorithm instability WARNING(Environment_out): p_inc=0, adjusting to 0.01, to avoid algorithm instability WARNING(Environment_out): p_inc=0, adjusting to 0.01, to avoid algorithm instability WARNING(Environment_out): p_inc=0, adjusting to 0.01, to avoid algorithm instability WARNING(Environment_out): p_inc=0, adjusting to 0.01, to avoid algorithm instability WARNING(Environment_out): p_inc=0, adjusting to 0.01, to avoid algorithm instability WARNING(Environment_out): p_inc=0, adjusting to 0.01, to avoid algorithm instability Table from file 'Na2Ca3Al2F14.laz' (block 1) is 841 x 18 (x=1:20), constant step. interpolation: linear '# TITLE *-Na2Ca3Al2F14-[I213] Courbion, G.;Ferey, G.[1988] Standard NAC cal ...' PowderN: Sample: Reading 841 rows from Na2Ca3Al2F14.laz PowderN: Sample: Read 841 reflections from file 'Na2Ca3Al2F14.laz' PowderN: Sample: Vc=1079.1 [Angs] sigma_abs=11.7856 [barn] sigma_inc=13.6704 [barn] reflections=Na2Ca3Al2F14.laz Opening input file '/home/nexmap/pkwi/McStas/mcstas/3.x-dev/data/V.laz' (Table_Read_Offset) WARNING(Environment_out): p_inc=0, adjusting to 0.01, to avoid algorithm instability WARNING(Environment_out): p_inc=0, adjusting to 0.01, to avoid algorithm instability WARNING(Environment_out): p_inc=0, adjusting to 0.01, to avoid algorithm instability Table from file 'V.laz' (block 1) is 21 x 18 (x=1:6), constant step. interpolation: linear '# TITLE *-V-[IM3-M] James, W.J.;Straumanis, M.E.[1960];# CELL 3.024100 3.02 ...' PowderN: Container_out: Reading 21 rows from V.laz PowderN: Container_out: Read 21 reflections from file 'V.laz' PowderN: Container_out: Vc=27.66 [Angs] sigma_abs=10.16 [barn] sigma_inc=9.87 [barn] reflections=V.laz WARNING(Environment_out): p_inc=0, adjusting to 0.01, to avoid algorithm instability Opening input file '/home/nexmap/pkwi/McStas/mcstas/3.x-dev/data/Al.laz' (Table_Read_Offset) Table from file 'Al.laz' (block 1) is 26 x 18 (x=1:8), constant step. interpolation: linear '# TITLE *Aluminum-Al-[FM3-M] Miller, H.P.jr.;DuMond, J.W.M.[1942] at 298 K; ...' PowderN: Environment_out: Reading 26 rows from Al.laz PowderN: Environment_out: Read 26 reflections from file 'Al.laz' PowderN: Environment_out: Vc=66.4 [Angs] sigma_abs=0.924 [barn] sigma_inc=0.0328 [barn] reflections=Al.laz *** TRACE end *** Save [ILL_H22_D1A] Detector: GuideOut_xy_I=5.46252e+07 GuideOut_xy_ERR=105089 GuideOut_xy_N=952908 "GuideOut_xy_1732332123.x_y" Detector: GuideOut_dxdy_I=5.46263e+07 GuideOut_dxdy_ERR=105090 GuideOut_dxdy_N=952892 "GuideOut_dxdy_1732332123.hd_vd" Detector: GuideOut_Phic_I=5.80349e+07 GuideOut_Phic_ERR=111624 GuideOut_Phic_N=952908 "GuideOut_Phic.dat" Detector: GuideOut_L_I=5.46252e+07 GuideOut_L_ERR=105089 GuideOut_L_N=952908 "GuideOut_L_1732332123.L" Detector: D1A_Mono_Dx_I=5.20911e+07 D1A_Mono_Dx_ERR=102848 D1A_Mono_Dx_N=854349 "D1A_Mono_Dx_1732332123.hd" Detector: Lmon_I=1.0544e+08 Lmon_ERR=357716 Lmon_N=312259 "Lmon_1732332123.L" Detector: PSDsample_I=1.78741e+08 PSDsample_ERR=465657 PSDsample_N=525315 "PSDsample_1732332123.x_y" Detector: BananaTheta_I=153171 BananaTheta_ERR=5821.9 BananaTheta_N=26487 "BananaTheta_1732332123.th" Finally [ILL_H22_D1A: 1]. Time: 4 [s] Finally [ILL_H22_D1A: 1]. Time: 4 [s] Finally [ILL_H22_D1A: 1]. Time: 4 [s] Finally [ILL_H22_D1A: 1]. Time: 4 [s] Detector: BananaPSD_I=394953 BananaPSD_ERR=8599.09 BananaPSD_N=72829 "BananaPSD_1732332123.th_y" Finally [ILL_H22_D1A: 1]. Time: 4 [s] Finally [ILL_H22_D1A: 1]. Time: 4 [s] Finally [ILL_H22_D1A: 1]. Time: 4 [s] Finally [ILL_H22_D1A: 1]. Time: 4 [s] Finally [ILL_H22_D1A: 1]. Time: 4 [s] Finally [ILL_H22_D1A: 1]. Time: 4 [s] Finally [ILL_H22_D1A: 1]. Time: 4 [s] Finally [ILL_H22_D1A: 1]. Time: 4 [s] Finally [ILL_H22_D1A: 1]. Time: 4 [s] Finally [ILL_H22_D1A: 1]. Time: 4 [s] Finally [ILL_H22_D1A: 1]. Time: 4 [s] Finally [ILL_H22_D1A: 1]. Time: 4 [s] PowderN: Sample: Info: you may highly improve the computation efficiency by using SPLIT 133 COMPONENT Sample=PowderN(...) in the instrument description /home/nexmap/pkwi/TESTS/2024-11-23/ANTLR_mpi_x_16_1e7_Linux_1e7/ILL_H22_D1A/ILL_H22_D1A.instr. INFO: Placing instr file copy ILL_H22_D1A.instr in dataset 1 INFO: Placing generated c-code copy ILL_H22_D1A.c in dataset 1