INFO: Using directory: "1" INFO: Using existing c-file: ./Geometry_test.c INFO: Using existing binary: ./Geometry_test.out INFO: === Simulation 'Geometry_test' (/home/nexmap/pkwi/TESTS/2024-12-22/ANTLR_mpi_x_16_1e7_Linux_1e7/Geometry_test/Geometry_test.instr): running on 16 nodes (master is 'elearn1.fysik.dtu.dk', MPI version 3.1). Opening input file '/home/nexmap/pkwi/McStas/mcstas/3.x-dev/data/Al.laz' (Table_Read_Offset) Table from file 'Al.laz' (block 1) is 26 x 18 (x=1:8), constant step. interpolation: linear '# TITLE *Aluminum-Al-[FM3-M] Miller, H.P.jr.;DuMond, J.W.M.[1942] at 298 K; ...' PowderN: Al_Powder: Reading 26 rows from Al.laz PowderN: Al_Powder: Read 26 reflections from file 'Al.laz' PowderN: Al_Powder: Vc=66.4 [Angs] sigma_abs=0.924 [barn] sigma_inc=0.0328 [barn] reflections=Al.laz Table from file 'Al.laz' (block 1) is 26 x 18 (x=1:8), constant step. interpolation: linear '# TITLE *Aluminum-Al-[FM3-M] Miller, H.P.jr.;DuMond, J.W.M.[1942] at 298 K; ...' PowderN: Al_Powder: Reading 26 rows from Al.laz PowderN: Al_Powder: Read 26 reflections from file 'Al.laz' PowderN: Al_Powder: Vc=66.4 [Angs] sigma_abs=0.924 [barn] sigma_inc=0.0328 [barn] reflections=Al.laz Table from file 'Al.laz' (block 1) is 26 x 18 (x=1:8), constant step. interpolation: linear '# TITLE *Aluminum-Al-[FM3-M] Miller, H.P.jr.;DuMond, J.W.M.[1942] at 298 K; ...' PowderN: Al_Powder: Reading 26 rows from Al.laz PowderN: Al_Powder: Read 26 reflections from file 'Al.laz' PowderN: Al_Powder: Vc=66.4 [Angs] sigma_abs=0.924 [barn] sigma_inc=0.0328 [barn] reflections=Al.laz Table from file 'Al.laz' (block 1) is 26 x 18 (x=1:8), constant step. interpolation: linear '# TITLE *Aluminum-Al-[FM3-M] Miller, H.P.jr.;DuMond, J.W.M.[1942] at 298 K; ...' PowderN: Al_Powder: Reading 26 rows from Al.laz PowderN: Al_Powder: Read 26 reflections from file 'Al.laz' PowderN: Al_Powder: Vc=66.4 [Angs] sigma_abs=0.924 [barn] sigma_inc=0.0328 [barn] reflections=Al.laz Table from file 'Al.laz' (block 1) is 26 x 18 (x=1:8), constant step. interpolation: linear '# TITLE *Aluminum-Al-[FM3-M] Miller, H.P.jr.;DuMond, J.W.M.[1942] at 298 K; ...' PowderN: Al_Powder: Reading 26 rows from Al.laz PowderN: Al_Powder: Read 26 reflections from file 'Al.laz' PowderN: Al_Powder: Vc=66.4 [Angs] sigma_abs=0.924 [barn] sigma_inc=0.0328 [barn] reflections=Al.laz Table from file 'Al.laz' (block 1) is 26 x 18 (x=1:8), constant step. interpolation: linear '# TITLE *Aluminum-Al-[FM3-M] Miller, H.P.jr.;DuMond, J.W.M.[1942] at 298 K; ...' PowderN: Al_Powder: Reading 26 rows from Al.laz PowderN: Al_Powder: Read 26 reflections from file 'Al.laz' PowderN: Al_Powder: Vc=66.4 [Angs] sigma_abs=0.924 [barn] sigma_inc=0.0328 [barn] reflections=Al.laz Opening input file '/home/nexmap/pkwi/McStas/mcstas/3.x-dev/data/Cu.laz' (Table_Read_Offset) Table from file 'Al.laz' (block 1) is 26 x 18 (x=1:8), constant step. interpolation: linear '# TITLE *Aluminum-Al-[FM3-M] Miller, H.P.jr.;DuMond, J.W.M.[1942] at 298 K; ...' PowderN: Al_Powder: Reading 26 rows from Al.laz PowderN: Al_Powder: Read 26 reflections from file 'Al.laz' PowderN: Al_Powder: Vc=66.4 [Angs] sigma_abs=0.924 [barn] sigma_inc=0.0328 [barn] reflections=Al.laz Table from file 'Al.laz' (block 1) is 26 x 18 (x=1:8), constant step. interpolation: linear '# TITLE *Aluminum-Al-[FM3-M] Miller, H.P.jr.;DuMond, J.W.M.[1942] at 298 K; ...' PowderN: Al_Powder: Reading 26 rows from Al.laz PowderN: Al_Powder: Read 26 reflections from file 'Al.laz' PowderN: Al_Powder: Vc=66.4 [Angs] sigma_abs=0.924 [barn] sigma_inc=0.0328 [barn] reflections=Al.laz Table from file 'Al.laz' (block 1) is 26 x 18 (x=1:8), constant step. interpolation: linear '# TITLE *Aluminum-Al-[FM3-M] Miller, H.P.jr.;DuMond, J.W.M.[1942] at 298 K; ...' PowderN: Al_Powder: Reading 26 rows from Al.laz PowderN: Al_Powder: Read 26 reflections from file 'Al.laz' PowderN: Al_Powder: Vc=66.4 [Angs] sigma_abs=0.924 [barn] sigma_inc=0.0328 [barn] reflections=Al.laz Table from file 'Al.laz' (block 1) is 26 x 18 (x=1:8), constant step. interpolation: linear '# TITLE *Aluminum-Al-[FM3-M] Miller, H.P.jr.;DuMond, J.W.M.[1942] at 298 K; ...' PowderN: Al_Powder: Reading 26 rows from Al.laz PowderN: Al_Powder: Read 26 reflections from file 'Al.laz' PowderN: Al_Powder: Vc=66.4 [Angs] sigma_abs=0.924 [barn] sigma_inc=0.0328 [barn] reflections=Al.laz Table from file 'Al.laz' (block 1) is 26 x 18 (x=1:8), constant step. interpolation: linear '# TITLE *Aluminum-Al-[FM3-M] Miller, H.P.jr.;DuMond, J.W.M.[1942] at 298 K; ...' PowderN: Al_Powder: Reading 26 rows from Al.laz PowderN: Al_Powder: Read 26 reflections from file 'Al.laz' PowderN: Al_Powder: Vc=66.4 [Angs] sigma_abs=0.924 [barn] sigma_inc=0.0328 [barn] reflections=Al.laz Table from file 'Al.laz' (block 1) is 26 x 18 (x=1:8), constant step. interpolation: linear '# TITLE *Aluminum-Al-[FM3-M] Miller, H.P.jr.;DuMond, J.W.M.[1942] at 298 K; ...' PowderN: Al_Powder: Reading 26 rows from Al.laz PowderN: Al_Powder: Read 26 reflections from file 'Al.laz' PowderN: Al_Powder: Vc=66.4 [Angs] sigma_abs=0.924 [barn] sigma_inc=0.0328 [barn] reflections=Al.laz Table from file 'Al.laz' (block 1) is 26 x 18 (x=1:8), constant step. interpolation: linear '# TITLE *Aluminum-Al-[FM3-M] Miller, H.P.jr.;DuMond, J.W.M.[1942] at 298 K; ...' PowderN: Al_Powder: Reading 26 rows from Al.laz PowderN: Al_Powder: Read 26 reflections from file 'Al.laz' PowderN: Al_Powder: Vc=66.4 [Angs] sigma_abs=0.924 [barn] sigma_inc=0.0328 [barn] reflections=Al.laz Table from file 'Al.laz' (block 1) is 26 x 18 (x=1:8), constant step. interpolation: linear '# TITLE *Aluminum-Al-[FM3-M] Miller, H.P.jr.;DuMond, J.W.M.[1942] at 298 K; ...' PowderN: Al_Powder: Reading 26 rows from Al.laz PowderN: Al_Powder: Read 26 reflections from file 'Al.laz' PowderN: Al_Powder: Vc=66.4 [Angs] sigma_abs=0.924 [barn] sigma_inc=0.0328 [barn] reflections=Al.laz Table from file 'Al.laz' (block 1) is 26 x 18 (x=1:8), constant step. interpolation: linear '# TITLE *Aluminum-Al-[FM3-M] Miller, H.P.jr.;DuMond, J.W.M.[1942] at 298 K; ...' PowderN: Al_Powder: Reading 26 rows from Al.laz PowderN: Al_Powder: Read 26 reflections from file 'Al.laz' PowderN: Al_Powder: Vc=66.4 [Angs] sigma_abs=0.924 [barn] sigma_inc=0.0328 [barn] reflections=Al.laz Table from file 'Al.laz' (block 1) is 26 x 18 (x=1:8), constant step. interpolation: linear '# TITLE *Aluminum-Al-[FM3-M] Miller, H.P.jr.;DuMond, J.W.M.[1942] at 298 K; ...' PowderN: Al_Powder: Reading 26 rows from Al.laz PowderN: Al_Powder: Read 26 reflections from file 'Al.laz' PowderN: Al_Powder: Vc=66.4 [Angs] sigma_abs=0.924 [barn] sigma_inc=0.0328 [barn] reflections=Al.laz Table from file 'Cu.laz' (block 1) is 19 x 18 (x=1:6), constant step. interpolation: linear '# TITLE *-Cu-[FM3-M] Otte, H.M.[1961];# CELL 3.615050 3.615050 3.615050 90. ...' PowderN: Cu_Powder: Reading 19 rows from Cu.laz PowderN: Cu_Powder: Read 19 reflections from file 'Cu.laz' PowderN: Cu_Powder: Vc=47.24 [Angs] sigma_abs=15.12 [barn] sigma_inc=2.2 [barn] reflections=Cu.laz Table from file 'Cu.laz' (block 1) is 19 x 18 (x=1:6), constant step. interpolation: linear '# TITLE *-Cu-[FM3-M] Otte, H.M.[1961];# CELL 3.615050 3.615050 3.615050 90. ...' PowderN: Cu_Powder: Reading 19 rows from Cu.laz PowderN: Cu_Powder: Read 19 reflections from file 'Cu.laz' PowderN: Cu_Powder: Vc=47.24 [Angs] sigma_abs=15.12 [barn] sigma_inc=2.2 [barn] reflections=Cu.laz Table from file 'Cu.laz' (block 1) is 19 x 18 (x=1:6), constant step. interpolation: linear '# TITLE *-Cu-[FM3-M] Otte, H.M.[1961];# CELL 3.615050 3.615050 3.615050 90. ...' PowderN: Cu_Powder: Reading 19 rows from Cu.laz PowderN: Cu_Powder: Read 19 reflections from file 'Cu.laz' PowderN: Cu_Powder: Vc=47.24 [Angs] sigma_abs=15.12 [barn] sigma_inc=2.2 [barn] reflections=Cu.laz [Geometry_test] Initialize [Geometry_test] Initialize [Geometry_test] Initialize Table from file 'Cu.laz' (block 1) is 19 x 18 (x=1:6), constant step. interpolation: linear '# TITLE *-Cu-[FM3-M] Otte, H.M.[1961];# CELL 3.615050 3.615050 3.615050 90. ...' PowderN: Cu_Powder: Reading 19 rows from Cu.laz PowderN: Cu_Powder: Read 19 reflections from file 'Cu.laz' Table from file 'Cu.laz' (block 1) is 19 x 18 (x=1:6), constant step. interpolation: linear '# TITLE *-Cu-[FM3-M] Otte, H.M.[1961];# CELL 3.615050 3.615050 3.615050 90. ...' PowderN: Cu_Powder: Reading 19 rows from Cu.laz PowderN: Cu_Powder: Vc=47.24 [Angs] sigma_abs=15.12 [barn] sigma_inc=2.2 [barn] reflections=Cu.laz PowderN: Cu_Powder: Read 19 reflections from file 'Cu.laz' PowderN: Cu_Powder: Vc=47.24 [Angs] sigma_abs=15.12 [barn] sigma_inc=2.2 [barn] reflections=Cu.laz [Geometry_test] Initialize Table from file 'Cu.laz' (block 1) is 19 x 18 (x=1:6), constant step. interpolation: linear '# TITLE *-Cu-[FM3-M] Otte, H.M.[1961];# CELL 3.615050 3.615050 3.615050 90. ...' PowderN: Cu_Powder: Reading 19 rows from Cu.laz PowderN: Cu_Powder: Read 19 reflections from file 'Cu.laz' PowderN: Cu_Powder: Vc=47.24 [Angs] sigma_abs=15.12 [barn] sigma_inc=2.2 [barn] reflections=Cu.laz [Geometry_test] Initialize [Geometry_test] Initialize Table from file 'Cu.laz' (block 1) is 19 x 18 (x=1:6), constant step. interpolation: linear '# TITLE *-Cu-[FM3-M] Otte, H.M.[1961];# CELL 3.615050 3.615050 3.615050 90. ...' PowderN: Cu_Powder: Reading 19 rows from Cu.laz PowderN: Cu_Powder: Read 19 reflections from file 'Cu.laz' PowderN: Cu_Powder: Vc=47.24 [Angs] sigma_abs=15.12 [barn] sigma_inc=2.2 [barn] reflections=Cu.laz Table from file 'Cu.laz' (block 1) is 19 x 18 (x=1:6), constant step. interpolation: linear '# TITLE *-Cu-[FM3-M] Otte, H.M.[1961];# CELL 3.615050 3.615050 3.615050 90. ...' PowderN: Cu_Powder: Reading 19 rows from Cu.laz PowderN: Cu_Powder: Read 19 reflections from file 'Cu.laz' PowderN: Cu_Powder: Vc=47.24 [Angs] sigma_abs=15.12 [barn] sigma_inc=2.2 [barn] reflections=Cu.laz Table from file 'Cu.laz' (block 1) is 19 x 18 (x=1:6), constant step. interpolation: linear '# TITLE *-Cu-[FM3-M] Otte, H.M.[1961];# CELL 3.615050 3.615050 3.615050 90. ...' PowderN: Cu_Powder: Reading 19 rows from Cu.laz PowderN: Cu_Powder: Read 19 reflections from file 'Cu.laz' Table from file 'Cu.laz' (block 1) is 19 x 18 (x=1:6), constant step. interpolation: linear '# TITLE *-Cu-[FM3-M] Otte, H.M.[1961];# CELL 3.615050 3.615050 3.615050 90. ...' PowderN: Cu_Powder: Reading 19 rows from Cu.laz [Geometry_test] Initialize [Geometry_test] Initialize Table from file 'Cu.laz' (block 1) is 19 x 18 (x=1:6), constant step. interpolation: linear '# TITLE *-Cu-[FM3-M] Otte, H.M.[1961];# CELL 3.615050 3.615050 3.615050 90. ...' PowderN: Cu_Powder: Reading 19 rows from Cu.laz PowderN: Cu_Powder: Read 19 reflections from file 'Cu.laz' PowderN: Cu_Powder: Vc=47.24 [Angs] sigma_abs=15.12 [barn] sigma_inc=2.2 [barn] reflections=Cu.laz PowderN: Cu_Powder: Read 19 reflections from file 'Cu.laz' PowderN: Cu_Powder: Vc=47.24 [Angs] sigma_abs=15.12 [barn] sigma_inc=2.2 [barn] reflections=Cu.laz [Geometry_test] Initialize PowderN: Cu_Powder: Vc=47.24 [Angs] sigma_abs=15.12 [barn] sigma_inc=2.2 [barn] reflections=Cu.laz [Geometry_test] Initialize Table from file 'Cu.laz' (block 1) is 19 x 18 (x=1:6), constant step. interpolation: linear '# TITLE *-Cu-[FM3-M] Otte, H.M.[1961];# CELL 3.615050 3.615050 3.615050 90. ...' PowderN: Cu_Powder: Reading 19 rows from Cu.laz PowderN: Cu_Powder: Read 19 reflections from file 'Cu.laz' PowderN: Cu_Powder: Vc=47.24 [Angs] sigma_abs=15.12 [barn] sigma_inc=2.2 [barn] reflections=Cu.laz [Geometry_test] Initialize Table from file 'Cu.laz' (block 1) is 19 x 18 (x=1:6), constant step. interpolation: linear '# TITLE *-Cu-[FM3-M] Otte, H.M.[1961];# CELL 3.615050 3.615050 3.615050 90. ...' PowderN: Cu_Powder: Reading 19 rows from Cu.laz PowderN: Cu_Powder: Read 19 reflections from file 'Cu.laz' PowderN: Cu_Powder: Vc=47.24 [Angs] sigma_abs=15.12 [barn] sigma_inc=2.2 [barn] reflections=Cu.laz Table from file 'Cu.laz' (block 1) is 19 x 18 (x=1:6), constant step. interpolation: linear '# TITLE *-Cu-[FM3-M] Otte, H.M.[1961];# CELL 3.615050 3.615050 3.615050 90. ...' PowderN: Cu_Powder: Reading 19 rows from Cu.laz PowderN: Cu_Powder: Read 19 reflections from file 'Cu.laz' PowderN: Cu_Powder: Vc=47.24 [Angs] sigma_abs=15.12 [barn] sigma_inc=2.2 [barn] reflections=Cu.laz [Geometry_test] Initialize [Geometry_test] Initialize Table from file 'Cu.laz' (block 1) is 19 x 18 (x=1:6), constant step. interpolation: linear '# TITLE *-Cu-[FM3-M] Otte, H.M.[1961];# CELL 3.615050 3.615050 3.615050 90. ...' PowderN: Cu_Powder: Reading 19 rows from Cu.laz PowderN: Cu_Powder: Read 19 reflections from file 'Cu.laz' PowderN: Cu_Powder: Vc=47.24 [Angs] sigma_abs=15.12 [barn] sigma_inc=2.2 [barn] reflections=Cu.laz [Geometry_test] Initialize Table from file 'Cu.laz' (block 1) is 19 x 18 (x=1:6), constant step. interpolation: linear '# TITLE *-Cu-[FM3-M] Otte, H.M.[1961];# CELL 3.615050 3.615050 3.615050 90. ...' PowderN: Cu_Powder: Reading 19 rows from Cu.laz PowderN: Cu_Powder: Read 19 reflections from file 'Cu.laz' PowderN: Cu_Powder: Vc=47.24 [Angs] sigma_abs=15.12 [barn] sigma_inc=2.2 [barn] reflections=Cu.laz [Geometry_test] Initialize [Geometry_test] Initialize Allocating 3D arrays Allocating 3D arrays Allocating 3D arrays Allocating 3D arrays Allocating 3D arrays Allocating 3D arrays Allocating 3D arrays Allocating 3D arrays Allocating 3D arrays Allocating 3D arrays Allocating 3D arrays Allocating 3D arrays Allocating 3D arrays Allocating 3D arrays Allocating 3D arrays Allocating 3D arrays --------------------------------------------------------------------- global_process_list_master->num_elements: 5 name of process [0]: Vanadium_incoherent component index [0]: 2 name of process [1]: Al_incoherent component index [1]: 4 name of process [2]: Al_Powder component index [2]: 5 name of process [3]: Cu_incoherent component index [3]: 7 name of process [4]: Cu_Powder component index [4]: 8 --------------------------------------------------------------------- global_material_list_master->num_elements: 3 name of material [0]: Vanadium component index [0]: 3 my_absoprtion [0]: 36.731743 number of processes [0]: 1 name of material [1]: Al component index [1]: 6 my_absoprtion [1]: 1.391566 number of processes [1]: 2 name of material [2]: Cu component index [2]: 9 my_absoprtion [2]: 160.101652 number of processes [2]: 2 --------------------------------------------------------------------- global_geometry_list_master->num_elements: 3 name of geometry [0]: cryostat_wall component index [0]: 13 Volume.name [0]: cryostat_wall Volume.p_physics.is_vacuum [0]: 0 Volume.p_physics.my_absorption [0]: 1.391566 Volume.p_physics.number of processes [0]: 2 Volume.geometry.shape [0]: cylinder Volume.geometry.center.x [0]: 0.000000 Volume.geometry.center.y [0]: 0.000000 Volume.geometry.center.z [0]: 0.300000 Volume.geometry.rotation_matrix[0] [0]: [1.000000 0.000000 0.000000] Volume.geometry.rotation_matrix[1] [0]: [0.000000 1.000000 0.000000] Volume.geometry.rotation_matrix[2] [0]: [0.000000 0.000000 1.000000] Volume.geometry.geometry_parameters.cyl_radius [0]: 0.070000 Volume.geometry.geometry_parameters.height [0]: 0.320000 Volume.geometry.focus_data_array.elements[0].Aim [0]: [0.000000 0.000000 1.000000] name of geometry [1]: cryostat_wall_vacuum component index [1]: 14 Volume.name [1]: cryostat_wall_vacuum Volume.p_physics.is_vacuum [1]: 1 Volume.p_physics.my_absorption [1]: 0.000000 Volume.p_physics.number of processes [1]: 0 Volume.geometry.shape [1]: cylinder Volume.geometry.center.x [1]: 0.000000 Volume.geometry.center.y [1]: 0.000000 Volume.geometry.center.z [1]: 0.300000 Volume.geometry.rotation_matrix[0] [1]: [1.000000 0.000000 0.000000] Volume.geometry.rotation_matrix[1] [1]: [0.000000 1.000000 0.000000] Volume.geometry.rotation_matrix[2] [1]: [0.000000 0.000000 1.000000] Volume.geometry.geometry_parameters.cyl_radius [1]: 0.068000 Volume.geometry.geometry_parameters.height [1]: 0.318000 Volume.geometry.focus_data_array.elements[0].Aim [1]: [0.000000 0.000000 1.000000] name of geometry [2]: sample_sphere component index [2]: 15 Volume.name [2]: sample_sphere Volume.p_physics.is_vacuum [2]: 0 Volume.p_physics.my_absorption [2]: 160.101652 Volume.p_physics.number of processes [2]: 2 Volume.geometry.shape [2]: sphere Volume.geometry.center.x [2]: 0.010000 Volume.geometry.center.y [2]: 0.000000 Volume.geometry.center.z [2]: 0.300000 Volume.geometry.rotation_matrix[0] [2]: [1.000000 0.000000 0.000000] Volume.geometry.rotation_matrix[1] [2]: [0.000000 1.000000 0.000000] Volume.geometry.rotation_matrix[2] [2]: [0.000000 0.000000 1.000000] Volume.geometry.focus_data_array.elements[0].Aim [2]: [0.000000 0.000000 1.000000] name of geometry [3]: sample_box component index [3]: 16 Volume.name [3]: sample_box Volume.p_physics.is_vacuum [3]: 0 Volume.p_physics.my_absorption [3]: 36.731743 Volume.p_physics.number of processes [3]: 1 Volume.geometry.shape [3]: box Volume.geometry.center.x [3]: -0.010000 Volume.geometry.center.y [3]: 0.000000 Volume.geometry.center.z [3]: 0.300000 Volume.geometry.rotation_matrix[0] [3]: [0.956305 0.163492 -0.242387] Volume.geometry.rotation_matrix[1] [3]: [-0.000000 0.829038 0.559193] Volume.geometry.rotation_matrix[2] [3]: [0.292372 -0.534759 0.792813] Volume.geometry.focus_data_array.elements[0].Aim [3]: [0.000000 0.000000 1.000000] name of geometry [4]: sample_cone component index [4]: 17 Volume.name [4]: sample_cone Volume.p_physics.is_vacuum [4]: 0 Volume.p_physics.my_absorption [4]: 160.101652 Volume.p_physics.number of processes [4]: 2 Volume.geometry.shape [4]: cone Volume.geometry.center.x [4]: 0.020000 Volume.geometry.center.y [4]: -0.030000 Volume.geometry.center.z [4]: 0.300000 Volume.geometry.rotation_matrix[0] [4]: [0.939693 0.342020 0.000000] Volume.geometry.rotation_matrix[1] [4]: [-0.342020 0.939693 0.000000] Volume.geometry.rotation_matrix[2] [4]: [0.000000 -0.000000 1.000000] Volume.geometry.focus_data_array.elements[0].Aim [4]: [0.000000 0.000000 1.000000] --------------------------------------------------------------------- number_of_volumes = 6 number_of_masks = 0 number_of_masked_volumes = 0 ---- Overview of the lists generated for each volume ---- List overview for surrounding vacuum LIST: Children for Volume 0 = [1,2,3,4,5] LIST: Direct_children for Volume 0 = [1] LIST: Intersect_check_list for Volume 0 = [1] LIST: Mask_intersect_list for Volume 0 = [] LIST: Destinations_list for Volume 0 = [] LIST: Reduced_destinations_list for Volume 0 = [] LIST: Next_volume_list for Volume 0 = [1] LIST: mask_list for Volume 0 = [] LIST: masked_by_list for Volume 0 = [] LIST: masked_by_mask_index_list for Volume 0 = [] mask_mode for Volume 0 = 0 List overview for cryostat_wall with cylinder shape made of Al LIST: Children for Volume 1 = [2,3,4,5] LIST: Direct_children for Volume 1 = [2] LIST: Intersect_check_list for Volume 1 = [2] LIST: Mask_intersect_list for Volume 1 = [] LIST: Destinations_list for Volume 1 = [0] LIST: Reduced_destinations_list for Volume 1 = [] LIST: Next_volume_list for Volume 1 = [0,2] Is_vacuum for Volume 1 = 0 is_mask_volume for Volume 1 = 0 is_masked_volume for Volume 1 = 0 is_exit_volume for Volume 1 = 0 LIST: mask_list for Volume 1 = [] LIST: masked_by_list for Volume 1 = [] LIST: masked_by_mask_index_list for Volume 1 = [] mask_mode for Volume 1 = 0 List overview for cryostat_wall_vacuum with cylinder shape made of Vacuum LIST: Children for Volume 2 = [3,4,5] LIST: Direct_children for Volume 2 = [3,4,5] LIST: Intersect_check_list for Volume 2 = [3,4,5] LIST: Mask_intersect_list for Volume 2 = [] LIST: Destinations_list for Volume 2 = [1] LIST: Reduced_destinations_list for Volume 2 = [1] LIST: Next_volume_list for Volume 2 = [1,3,4,5] Is_vacuum for Volume 2 = 1 is_mask_volume for Volume 2 = 0 is_masked_volume for Volume 2 = 0 is_exit_volume for Volume 2 = 0 LIST: mask_list for Volume 2 = [] LIST: masked_by_list for Volume 2 = [] LIST: masked_by_mask_index_list for Volume 2 = [] mask_mode for Volume 2 = 0 List overview for sample_sphere with sphere shape made of Cu LIST: Children for Volume 3 = [] LIST: Direct_children for Volume 3 = [] LIST: Intersect_check_list for Volume 3 = [4,5] LIST: Mask_intersect_list for Volume 3 = [] LIST: Destinations_list for Volume 3 = [2] LIST: Reduced_destinations_list for Volume 3 = [2] LIST: Next_volume_list for Volume 3 = [2,4,5] Is_vacuum for Volume 3 = 0 is_mask_volume for Volume 3 = 0 is_masked_volume for Volume 3 = 0 is_exit_volume for Volume 3 = 0 LIST: mask_list for Volume 3 = [] LIST: masked_by_list for Volume 3 = [] LIST: masked_by_mask_index_list for Volume 3 = [] mask_mode for Volume 3 = 0 List overview for sample_box with box shape made of Vanadium LIST: Children for Volume 4 = [] LIST: Direct_children for Volume 4 = [] LIST: Intersect_check_list for Volume 4 = [5] LIST: Mask_intersect_list for Volume 4 = [] LIST: Destinations_list for Volume 4 = [2,3] LIST: Reduced_destinations_list for Volume 4 = [2] LIST: Next_volume_list for Volume 4 = [2,3,5] Is_vacuum for Volume 4 = 0 is_mask_volume for Volume 4 = 0 is_masked_volume for Volume 4 = 0 is_exit_volume for Volume 4 = 0 LIST: mask_list for Volume 4 = [] LIST: masked_by_list for Volume 4 = [] LIST: masked_by_mask_index_list for Volume 4 = [] mask_mode for Volume 4 = 0 List overview for sample_cone with cone shape made of Cu LIST: Children for Volume 5 = [] LIST: Direct_children for Volume 5 = [] LIST: Intersect_check_list for Volume 5 = [] LIST: Mask_intersect_list for Volume 5 = [] LIST: Destinations_list for Volume 5 = [2,3,4] LIST: Reduced_destinations_list for Volume 5 = [2] LIST: Next_volume_list for Volume 5 = [2,3,4] Is_vacuum for Volume 5 = 0 is_mask_volume for Volume 5 = 0 is_masked_volume for Volume 5 = 0 is_exit_volume for Volume 5 = 0 LIST: mask_list for Volume 5 = [] LIST: masked_by_list for Volume 5 = [] LIST: masked_by_mask_index_list for Volume 5 = [] mask_mode for Volume 5 = 0 Union_master component sample initialized sucessfully *** TRACE end *** Save [Geometry_test] Detector: test_logger_1D_I=379153 test_logger_1D_ERR=163.88 test_logger_1D_N=1.5539e+07 "logger_1D.dat" Detector: test_logger_2DQ_I=379154 test_logger_2DQ_ERR=163.88 test_logger_2DQ_N=1.55432e+07 "logger_2DQ.dat" Detector: test_logger_2D_space_zx_I=379154 test_logger_2D_space_zx_ERR=163.88 test_logger_2D_space_zx_N=1.55432e+07 "logger_2D_space_zx.dat" Detector: test_logger_2D_space_zy_I=378670 test_logger_2D_space_zy_ERR=163.852 test_logger_2D_space_zy_N=1.54163e+07 "logger_2D_space_zy.dat" Detector: test_logger_3D_space_I=63308.1 test_logger_3D_space_ERR=60.8389 test_logger_3D_space_N=3.43019e+06 "logger_3D_space.dat_0" Detector: test_logger_3D_space_I=85620.3 test_logger_3D_space_ERR=81.3435 test_logger_3D_space_N=4.15426e+06 "logger_3D_space.dat_1" Detector: test_logger_3D_space_I=100581 test_logger_3D_space_ERR=97.4212 test_logger_3D_space_N=3.56262e+06 "logger_3D_space.dat_2" Detector: detector_I=2.49694e+06 detector_ERR=1231.53 detector_N=4.18101e+06 "PSD.dat" Finally [Geometry_test: 1]. Time: 1 [s] Finally [Geometry_test: 1]. Time: 1 [s] Finally [Geometry_test: 1]. Time: 1 [s] Finally [Geometry_test: 1]. Time: 1 [s] Finally [Geometry_test: 1]. Time: 1 [s] Finally [Geometry_test: 1]. Time: 1 [s] Finally [Geometry_test: 1]. Time: 1 [s] Finally [Geometry_test: 1]. Time: 1 [s] Detector: detector_scat_I=40.1158 detector_scat_ERR=1.55262 detector_scat_N=3554 "PSD_scat.dat" Finally [Geometry_test: 1]. Time: 1 [s] Finally [Geometry_test: 1]. Time: 1 [s] Finally [Geometry_test: 1]. Time: 1 [s] Finally [Geometry_test: 1]. Time: 1 [s] Finally [Geometry_test: 1]. Time: 1 [s] Finally [Geometry_test: 1]. Time: 1 [s] Finally [Geometry_test: 1]. Time: 1 [s] Finally [Geometry_test: 1]. Time: 1 [s] INFO: Placing instr file copy Geometry_test.instr in dataset 1 INFO: Placing generated c-code copy Geometry_test.c in dataset 1