INFO: Using directory: "1"
INFO: Using existing c-file: ./Test_Monochromator_bent.c
INFO: Using existing binary: ./Test_Monochromator_bent.out
WARNING: Ignoring invalid parameter: "Test_Monochromator_bent.instr"
INFO: ===
Simulation 'Test_Monochromator_bent' (Test_Monochromator_bent.instr): running on 16 nodes (master is 'elearn1.fysik.dtu.dk', MPI version 3.1).
*** TRACE end *** 
Detector: entry_monitor_I=0.747922 entry_monitor_ERR=0.000236514 entry_monitor_N=1e+07 "entry_monitor.dat"
Detector: PSD_exit_monitor_I=0.543357 PSD_exit_monitor_ERR=0.000171848 PSD_exit_monitor_N=1e+07 "det2d.dat"
corrupted size vs. prev_size
# Last I/O Error: No such file or directory
free(): invalid next size (fast)
free(): invalid next size (fast)
free(): invalid next size (fast)

# McStas 3.x-dev - May. 13, 2025: [pid 676718] Signal 6 detected [proc 0] SIGABRT (Abort)
# Simulation: Test_Monochromator_bent (Test_Monochromator_bent.instr) 
# Breakpoint: [_entry_monitor_finally] component entry_monitor=PSD_monitor() FINALLY [PSD_monitor:0] 0.00 % (       0.0/  625000.0)
# Date:      Wed May 14 01:14:25 2025
# Started:   Wed May 14 01:14:24 2025
# McStas 3.x-dev - May. 13, 2025: Simulation stop (abort).
# Last I/O Error: Address already in use
# Last I/O Error: Address already in use
# Last I/O Error: No such file or directory

# McStas 3.x-dev - May. 13, 2025: [pid 676725] Signal 6 detected [proc 7] SIGABRT (Abort)
# Simulation: Test_Monochromator_bent (Test_Monochromator_bent.instr) 
# Breakpoint: [_entry_monitor_finally] component entry_monitor=PSD_monitor() FINALLY [PSD_monitor:0] 0.00 % (       0.0/  625000.0)
# Date:      Wed May 14 01:14:25 2025
# Started:   Wed May 14 01:14:24 2025
# McStas 3.x-dev - May. 13, 2025: Simulation stop (abort).

# McStas 3.x-dev - May. 13, 2025: [pid 676721] Signal 6 detected [proc 3] SIGABRT (Abort)
# Simulation: Test_Monochromator_bent (Test_Monochromator_bent.instr) 
# Breakpoint: [_entry_monitor_finally] component entry_monitor=PSD_monitor() FINALLY [PSD_monitor:0] 0.00 % (       0.0/  625000.0)
# Date:      Wed May 14 01:14:25 2025
# Started:   Wed May 14 01:14:24 2025
# McStas 3.x-dev - May. 13, 2025: Simulation stop (abort).
corrupted size vs. prev_size

# McStas 3.x-dev - May. 13, 2025: [pid 676720] Signal 6 detected [proc 2] SIGABRT (Abort)
# Simulation: Test_Monochromator_bent (Test_Monochromator_bent.instr) 
# Breakpoint: [_entry_monitor_finally] component entry_monitor=PSD_monitor() FINALLY [PSD_monitor:0] 0.00 % (       0.0/  625000.0)
# Date:      Wed May 14 01:14:25 2025
# Started:   Wed May 14 01:14:24 2025
# McStas 3.x-dev - May. 13, 2025: Simulation stop (abort).
# Last I/O Error: Address already in use

# McStas 3.x-dev - May. 13, 2025: [pid 676727] Signal 6 detected [proc 9] SIGABRT (Abort)
# Simulation: Test_Monochromator_bent (Test_Monochromator_bent.instr) 
# Breakpoint: [_entry_monitor_finally] component entry_monitor=PSD_monitor() FINALLY [PSD_monitor:0] 0.00 % (       0.0/  625000.0)
# Date:      Wed May 14 01:14:25 2025
# Started:   Wed May 14 01:14:24 2025
# McStas 3.x-dev - May. 13, 2025: Simulation stop (abort).
corrupted size vs. prev_size

# McStas 3.x-dev - May. 13, 2025: [pid 676724] Signal 6 detected [proc 6] SIGABRT (Abort)
# Simulation: Test_Monochromator_bent (Test_Monochromator_bent.instr) 
# Breakpoint: [_entry_monitor_finally] component entry_monitor=PSD_monitor() FINALLY [PSD_monitor:0] 0.00 % (       0.0/  625000.0)
# Last I/O Error: Bad file descriptor
# Date:      Wed May 14 01:14:25 2025
# Started:   Wed May 14 01:14:24 2025
# McStas 3.x-dev - May. 13, 2025: Simulation stop (abort).
--------------------------------------------------------------------------
prterun noticed that process rank 0 with PID 676718 on node elearn1 exited on
signal 3 (Quit).
--------------------------------------------------------------------------
INFO: call to mpirun failed with Command 'mpirun -np 16 ./Test_Monochromator_bent.out --trace=0 --seed=1000 --ncount=10000000.0 --dir=1 --format=McCode --bufsiz=10000000 mono_mos=0' returned non-zero exit status 131.
Traceback (most recent call last):
  File "/home/nexmap/pkwi/McStas/mcstas/3.x-dev/tools/Python/mcrun/mcrun.py", line 616, in <module>
    main()
  File "/home/nexmap/pkwi/McStas/mcstas/3.x-dev/tools/Python/mcrun/mcrun.py", line 588, in main
    mcstas.run()  # in mccode.py
    ^^^^^^^^^^^^
  File "/home/nexmap/pkwi/McStas/mcstas/3.x-dev/tools/Python/mcrun/mccode.py", line 347, in run
    return self.runMPI(args, pipe, override_mpi)
           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/home/nexmap/pkwi/McStas/mcstas/3.x-dev/tools/Python/mcrun/mccode.py", line 401, in runMPI
    return Process(binpath).run(args, pipe=pipe)
           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/home/nexmap/pkwi/McStas/mcstas/3.x-dev/tools/Python/mcrun/mccode.py", line 77, in run
    raise err
  File "/home/nexmap/pkwi/McStas/mcstas/3.x-dev/tools/Python/mcrun/mccode.py", line 73, in run
    proc = run(command, shell=True, check=True, text=True, capture_output=pipe)
           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/home/nexmap/pkwi/McStas/mcstas/3.x-dev/miniconda3/lib/python3.12/subprocess.py", line 571, in run
    raise CalledProcessError(retcode, process.args,
subprocess.CalledProcessError: Command 'mpirun -np 16 ./Test_Monochromator_bent.out --trace=0 --seed=1000 --ncount=10000000.0 --dir=1 --format=McCode --bufsiz=10000000 mono_mos=0' returned non-zero exit status 131.