INFO: Using directory: "1" INFO: Using existing c-file: ./Supermirror_thin_substrate.c INFO: Using existing binary: ./Supermirror_thin_substrate.out WARNING: Ignoring invalid parameter: "Supermirror_thin_substrate.instr" INFO: === Simulation 'Supermirror_thin_substrate' (Supermirror_thin_substrate.instr): running on 16 nodes (master is 'elearn1.fysik.dtu.dk', MPI version 3.1). src=(0.01, 0.09) det_m=(-0, 1) det_zoom_in=(0.01, 0.1) det=(0.06, 0.2) det_zoom_out=(0.3, 0.2) Rot_Angle_Third_In_Degree=0 -> 0 : det_1D=(300, 1) SupermirrorFlat.comp: INITIALIZE name=supermirror1 length = 4 m, thickness_in_mm = 0.5 mm side_edge normal,point = (0,1,0), (0,1,0) m mirror_coated_side = BothCoated mirror_spin_plus_material name,m = FeSiPlus, 3.5 mirror_spin_minus_material name,m = FeSiMinus, -1 substrate_material name = GlassNoAttenuation absorber_coated_side = BothNotCoated absorber_material name,thickness in micron = Empty, 0 initial_placement_at_origin = TopFrontEdgeCentre tilt_y_axis_location = TopMirrorCentre tilt_about_y_first_in_degree, translation_second, rot_about_z_third_in_degree = 0.64 deg, (0,0,0) m, 0 deg SupermirrorFlat.comp: INITIALIZE name=supermirror1 length = 4 m, thickness_in_mm = 0.5 mm side_edge normal,point = (0,1,0), (0,1,0) m mirror_coated_side = BothCoated mirror_spin_plus_material name,m = FeSiPlus, 3.5 mirror_spin_minus_material name,m = FeSiMinus, -1 substrate_material name = GlassNoAttenuation absorber_coated_side = BothNotCoated absorber_material name,thickness in micron = Empty, 0 initial_placement_at_origin = TopFrontEdgeCentre tilt_y_axis_location = TopMirrorCentre tilt_about_y_first_in_degree, translation_second, rot_about_z_third_in_degree = 0.64 deg, (0,0,0) m, 0 deg SupermirrorFlat.comp: INITIALIZE name=supermirror1 length = 4 m, thickness_in_mm = 0.5 mm side_edge normal,point = (0,1,0), (0,1,0) m mirror_coated_side = BothCoated mirror_spin_plus_material name,m = FeSiPlus, 3.5 mirror_spin_minus_material name,m = FeSiMinus, -1 substrate_material name = GlassNoAttenuation absorber_coated_side = BothNotCoated absorber_material name,thickness in micron = Empty, 0 initial_placement_at_origin = TopFrontEdgeCentre tilt_y_axis_location = TopMirrorCentre tilt_about_y_first_in_degree, translation_second, rot_about_z_third_in_degree = 0.64 deg, (0,0,0) m, 0 deg SupermirrorFlat.comp: INITIALIZE name=supermirror1 length = 4 m, thickness_in_mm = 0.5 mm side_edge normal,point = (0,1,0), (0,1,0) m mirror_coated_side = BothCoated mirror_spin_plus_material name,m = FeSiPlus, 3.5 mirror_spin_minus_material name,m = FeSiMinus, -1 substrate_material name = GlassNoAttenuation absorber_coated_side = BothNotCoated absorber_material name,thickness in micron = Empty, 0 initial_placement_at_origin = TopFrontEdgeCentre tilt_y_axis_location = TopMirrorCentre tilt_about_y_first_in_degree, translation_second, rot_about_z_third_in_degree = 0.64 deg, (0,0,0) m, 0 deg SupermirrorFlat.comp: INITIALIZE name=supermirror1 length = 4 m, thickness_in_mm = 0.5 mm side_edge normal,point = (0,1,0), (0,1,0) m mirror_coated_side = BothCoated mirror_spin_plus_material name,m = FeSiPlus, 3.5 mirror_spin_minus_material name,m = FeSiMinus, -1 substrate_material name = GlassNoAttenuation absorber_coated_side = BothNotCoated absorber_material name,thickness in micron = Empty, 0 initial_placement_at_origin = TopFrontEdgeCentre tilt_y_axis_location = TopMirrorCentre tilt_about_y_first_in_degree, translation_second, rot_about_z_third_in_degree = 0.64 deg, (0,0,0) m, 0 deg SupermirrorFlat.comp: INITIALIZE name=supermirror1 length = 4 m, thickness_in_mm = 0.5 mm side_edge normal,point = (0,1,0), (0,1,0) m mirror_coated_side = BothCoated mirror_spin_plus_material name,m = FeSiPlus, 3.5 mirror_spin_minus_material name,m = FeSiMinus, -1 substrate_material name = GlassNoAttenuation absorber_coated_side = BothNotCoated absorber_material name,thickness in micron = Empty, 0 initial_placement_at_origin = TopFrontEdgeCentre tilt_y_axis_location = TopMirrorCentre tilt_about_y_first_in_degree, translation_second, rot_about_z_third_in_degree = 0.64 deg, (0,0,0) m, 0 deg SupermirrorFlat.comp: INITIALIZE name=supermirror1 length = 4 m, thickness_in_mm = 0.5 mm side_edge normal,point = (0,1,0), (0,1,0) m mirror_coated_side = BothCoated mirror_spin_plus_material name,m = FeSiPlus, 3.5 mirror_spin_minus_material name,m = FeSiMinus, -1 substrate_material name = GlassNoAttenuation absorber_coated_side = BothNotCoated absorber_material name,thickness in micron = Empty, 0 initial_placement_at_origin = TopFrontEdgeCentre tilt_y_axis_location = TopMirrorCentre tilt_about_y_first_in_degree, translation_second, rot_about_z_third_in_degree = 0.64 deg, (0,0,0) m, 0 deg SupermirrorFlat.comp: INITIALIZE name=supermirror1 length = 4 m, thickness_in_mm = 0.5 mm side_edge normal,point = (0,1,0), (0,1,0) m mirror_coated_side = BothCoated mirror_spin_plus_material name,m = FeSiPlus, 3.5 mirror_spin_minus_material name,m = FeSiMinus, -1 substrate_material name = GlassNoAttenuation absorber_coated_side = BothNotCoated absorber_material name,thickness in micron = Empty, 0 initial_placement_at_origin = TopFrontEdgeCentre tilt_y_axis_location = TopMirrorCentre tilt_about_y_first_in_degree, translation_second, rot_about_z_third_in_degree = 0.64 deg, (0,0,0) m, 0 deg SupermirrorFlat.comp: INITIALIZE name=supermirror1 length = 4 m, thickness_in_mm = 0.5 mm side_edge normal,point = (0,1,0), (0,1,0) m mirror_coated_side = BothCoated mirror_spin_plus_material name,m = FeSiPlus, 3.5 mirror_spin_minus_material name,m = FeSiMinus, -1 substrate_material name = GlassNoAttenuation absorber_coated_side = BothNotCoated absorber_material name,thickness in micron = Empty, 0 initial_placement_at_origin = TopFrontEdgeCentre tilt_y_axis_location = TopMirrorCentre tilt_about_y_first_in_degree, translation_second, rot_about_z_third_in_degree = 0.64 deg, (0,0,0) m, 0 deg SupermirrorFlat.comp: INITIALIZE name=supermirror1 length = 4 m, thickness_in_mm = 0.5 mm side_edge normal,point = (0,1,0), (0,1,0) m mirror_coated_side = BothCoated mirror_spin_plus_material name,m = FeSiPlus, 3.5 mirror_spin_minus_material name,m = FeSiMinus, -1 substrate_material name = GlassNoAttenuation absorber_coated_side = BothNotCoated absorber_material name,thickness in micron = Empty, 0 initial_placement_at_origin = TopFrontEdgeCentre tilt_y_axis_location = TopMirrorCentre tilt_about_y_first_in_degree, translation_second, rot_about_z_third_in_degree = 0.64 deg, (0,0,0) m, 0 deg SupermirrorFlat.comp: INITIALIZE name=supermirror1 length = 4 m, thickness_in_mm = 0.5 mm side_edge normal,point = (0,1,0), (0,1,0) m mirror_coated_side = BothCoated mirror_spin_plus_material name,m = FeSiPlus, 3.5 mirror_spin_minus_material name,m = FeSiMinus, -1 substrate_material name = GlassNoAttenuation absorber_coated_side = BothNotCoated absorber_material name,thickness in micron = Empty, 0 initial_placement_at_origin = TopFrontEdgeCentre tilt_y_axis_location = TopMirrorCentre tilt_about_y_first_in_degree, translation_second, rot_about_z_third_in_degree = 0.64 deg, (0,0,0) m, 0 deg SupermirrorFlat.comp: INITIALIZE name=supermirror1 length = 4 m, thickness_in_mm = 0.5 mm side_edge normal,point = (0,1,0), (0,1,0) m mirror_coated_side = BothCoated mirror_spin_plus_material name,m = FeSiPlus, 3.5 mirror_spin_minus_material name,m = FeSiMinus, -1 substrate_material name = GlassNoAttenuation absorber_coated_side = BothNotCoated absorber_material name,thickness in micron = Empty, 0 initial_placement_at_origin = TopFrontEdgeCentre tilt_y_axis_location = TopMirrorCentre tilt_about_y_first_in_degree, translation_second, rot_about_z_third_in_degree = 0.64 deg, (0,0,0) m, 0 deg SupermirrorFlat.comp: INITIALIZE name=supermirror1 length = 4 m, thickness_in_mm = 0.5 mm side_edge normal,point = (0,1,0), (0,1,0) m mirror_coated_side = BothCoated mirror_spin_plus_material name,m = FeSiPlus, 3.5 mirror_spin_minus_material name,m = FeSiMinus, -1 substrate_material name = GlassNoAttenuation absorber_coated_side = BothNotCoated absorber_material name,thickness in micron = Empty, 0 initial_placement_at_origin = TopFrontEdgeCentre tilt_y_axis_location = TopMirrorCentre tilt_about_y_first_in_degree, translation_second, rot_about_z_third_in_degree = 0.64 deg, (0,0,0) m, 0 deg SupermirrorFlat.comp: INITIALIZE name=supermirror1 length = 4 m, thickness_in_mm = 0.5 mm side_edge normal,point = (0,1,0), (0,1,0) m mirror_coated_side = BothCoated mirror_spin_plus_material name,m = FeSiPlus, 3.5 mirror_spin_minus_material name,m = FeSiMinus, -1 substrate_material name = GlassNoAttenuation absorber_coated_side = BothNotCoated absorber_material name,thickness in micron = Empty, 0 initial_placement_at_origin = TopFrontEdgeCentre tilt_y_axis_location = TopMirrorCentre tilt_about_y_first_in_degree, translation_second, rot_about_z_third_in_degree = 0.64 deg, (0,0,0) m, 0 deg SupermirrorFlat.comp: INITIALIZE name=supermirror1 length = 4 m, thickness_in_mm = 0.5 mm side_edge normal,point = (0,1,0), (0,1,0) m mirror_coated_side = BothCoated mirror_spin_plus_material name,m = FeSiPlus, 3.5 mirror_spin_minus_material name,m = FeSiMinus, -1 substrate_material name = GlassNoAttenuation absorber_coated_side = BothNotCoated absorber_material name,thickness in micron = Empty, 0 initial_placement_at_origin = TopFrontEdgeCentre tilt_y_axis_location = TopMirrorCentre tilt_about_y_first_in_degree, translation_second, rot_about_z_third_in_degree = 0.64 deg, (0,0,0) m, 0 deg SupermirrorFlat.comp: INITIALIZE name=supermirror1 length = 4 m, thickness_in_mm = 0.5 mm side_edge normal,point = (0,1,0), (0,1,0) m mirror_coated_side = BothCoated mirror_spin_plus_material name,m = FeSiPlus, 3.5 mirror_spin_minus_material name,m = FeSiMinus, -1 substrate_material name = GlassNoAttenuation absorber_coated_side = BothNotCoated absorber_material name,thickness in micron = Empty, 0 initial_placement_at_origin = TopFrontEdgeCentre tilt_y_axis_location = TopMirrorCentre tilt_about_y_first_in_degree, translation_second, rot_about_z_third_in_degree = 0.64 deg, (0,0,0) m, 0 deg *** TRACE end *** Detector: PSD_after_supermirror_zoom_in_I=3.12535e-05 PSD_after_supermirror_zoom_in_ERR=1.13369e-08 PSD_after_supermirror_zoom_in_N=7.59994e+06 "PSD_after_supermirror_zoom_in.dat" Detector: PSD_after_supermirror_I=4.11234e-05 PSD_after_supermirror_ERR=1.30043e-08 PSD_after_supermirror_N=1e+07 "PSD_after_supermirror.dat" Detector: PSD_after_supermirror_zoom_out_I=4.11234e-05 PSD_after_supermirror_zoom_out_ERR=1.30043e-08 PSD_after_supermirror_zoom_out_N=1e+07 "PSD_after_supermirror_zoom_out.dat" Detector: spectrum_I=4.11234e-05 spectrum_ERR=1.30043e-08 spectrum_N=1e+07 "spectrum.dat" Detector: Pol_lambda_I=0 Pol_lambda_ERR=0 Pol_lambda_N=7.59994e+06 "pol_lambda.dat" Detector: Polmap_average_I=0 Polmap_average_ERR=0 Polmap_average_N=1.6e+08 "Polmap_average.dat" Detector: Polmap_zoom_in_I=0 Polmap_zoom_in_ERR=0 Polmap_zoom_in_N=1.21599e+08 "Polmap_zoom_in.dat" Detector: Polmap_I=0 Polmap_ERR=0 Polmap_N=1.6e+08 "Polmap.dat" Detector: Polmap_zoom_out_I=0 Polmap_zoom_out_ERR=0 Polmap_zoom_out_N=1.6e+08 "Polmap_zoom_out.dat" corrupted size vs. prev_size corrupted size vs. prev_size # Last I/O Error: Address already in use # McStas 3.x-dev - May. 13, 2025: [pid 712310] Signal 6 detected [proc 7] SIGABRT (Abort) # Simulation: Supermirror_thin_substrate (Supermirror_thin_substrate.instr) # Breakpoint: [_Polmap_average_finally] component Polmap_average=PSD_Pol_monitor() FINALLY [PSD_Pol_monitor:0] 0.00 % ( 0.0/ 625000.0) # Date: Wed May 14 01:16:46 2025 # Started: Wed May 14 01:16:44 2025 # McStas 3.x-dev - May. 13, 2025: Simulation stop (abort). # Last I/O Error: Address already in use # McStas 3.x-dev - May. 13, 2025: [pid 712312] Signal 6 detected [proc 9] SIGABRT (Abort) # Simulation: Supermirror_thin_substrate (Supermirror_thin_substrate.instr) # Breakpoint: [_Polmap_average_finally] component Polmap_average=PSD_Pol_monitor() FINALLY [PSD_Pol_monitor:0] 0.00 % ( 0.0/ 625000.0) # Date: Wed May 14 01:16:46 2025 # Started: Wed May 14 01:16:44 2025 # McStas 3.x-dev - May. 13, 2025: Simulation stop (abort). # McStas 3.x-dev - May. 13, 2025: [pid 712307] Signal 11 detected [proc 4] SIGSEGV (Mem Error) # Simulation: Supermirror_thin_substrate (Supermirror_thin_substrate.instr) # Breakpoint: [_Polmap_average_finally] component Polmap_average=PSD_Pol_monitor() FINALLY [PSD_Pol_monitor:0] 0.00 % ( 0.0/ 625000.0) # McStas 3.x-dev - May. 13, 2025: [pid 712304] Signal 11 detected [proc 1] SIGSEGV (Mem Error) # Simulation: Supermirror_thin_substrate (Supermirror_thin_substrate.instr) # Breakpoint: [_Polmap_average_finally] component Polmap_average=PSD_Pol_monitor() FINALLY [PSD_Pol_monitor:0] 0.00 % ( 0.0/ 625000.0) # Date: Wed May 14 01:16:46 2025 # Started: Wed May 14 01:16:44 2025 # Date: Wed May 14 01:16:46 2025 # Started: Wed May 14 01:16:44 2025 # Last I/O Error: Bad file descriptor # Last I/O Error: Bad file descriptor # McStas 3.x-dev - May. 13, 2025: Simulation stop (abort). # McStas 3.x-dev - May. 13, 2025: Simulation stop (abort). # McStas 3.x-dev - May. 13, 2025: [pid 712308] Signal 11 detected [proc 5] SIGSEGV (Mem Error) # Simulation: Supermirror_thin_substrate (Supermirror_thin_substrate.instr) # Breakpoint: [_Polmap_average_finally] component Polmap_average=PSD_Pol_monitor() FINALLY [PSD_Pol_monitor:0] 0.00 % ( 0.0/ 625000.0) # Last I/O Error: Bad file descriptor # McStas 3.x-dev - May. 13, 2025: [pid 712315] Signal 11 detected [proc 12] SIGSEGV (Mem Error) # Simulation: Supermirror_thin_substrate (Supermirror_thin_substrate.instr) # Breakpoint: [_Polmap_average_finally] component Polmap_average=PSD_Pol_monitor() FINALLY [PSD_Pol_monitor:0] 0.00 % ( 0.0/ 625000.0) # Date: Wed May 14 01:16:46 2025 # Started: Wed May 14 01:16:44 2025 # McStas 3.x-dev - May. 13, 2025: [pid 712314] Signal 11 detected [proc 11] SIGSEGV (Mem Error) # Simulation: Supermirror_thin_substrate (Supermirror_thin_substrate.instr) # Breakpoint: [_Polmap_average_finally] component Polmap_average=PSD_Pol_monitor() FINALLY [PSD_Pol_monitor:0] 0.00 % ( 0.0/ 625000.0) # Date: Wed May 14 01:16:46 2025 # Started: Wed May 14 01:16:44 2025 # McStas 3.x-dev - May. 13, 2025: Simulation stop (abort). # Date: Wed May 14 01:16:46 2025 # Started: Wed May 14 01:16:44 2025 # McStas 3.x-dev - May. 13, 2025: Simulation stop (abort). # Last I/O Error: Bad file descriptor # Last I/O Error: Bad file descriptor # McStas 3.x-dev - May. 13, 2025: Simulation stop (abort). # McStas 3.x-dev - May. 13, 2025: [pid 712305] Signal 11 detected [proc 2] SIGSEGV (Mem Error) # Simulation: Supermirror_thin_substrate (Supermirror_thin_substrate.instr) # McStas 3.x-dev - May. 13, 2025: [pid 712306] Signal 11 detected [proc 3] SIGSEGV (Mem Error) # Simulation: Supermirror_thin_substrate (Supermirror_thin_substrate.instr) # Breakpoint: [_Polmap_average_finally] component Polmap_average=PSD_Pol_monitor() FINALLY [PSD_Pol_monitor:0] 0.00 % ( 0.0/ 625000.0) # Breakpoint: [_Polmap_average_finally] component Polmap_average=PSD_Pol_monitor() FINALLY [PSD_Pol_monitor:0] 0.00 % ( 0.0/ 625000.0) # Date: Wed May 14 01:16:46 2025 # Date: Wed May 14 01:16:46 2025 # Started: Wed May 14 01:16:44 2025 # Started: Wed May 14 01:16:44 2025 # Last I/O Error: Bad file descriptor # Last I/O Error: Bad file descriptor # McStas 3.x-dev - May. 13, 2025: [pid 712309] Signal 11 detected [proc 6] SIGSEGV (Mem Error) # Simulation: Supermirror_thin_substrate (Supermirror_thin_substrate.instr) # Breakpoint: [_Polmap_average_finally] component Polmap_average=PSD_Pol_monitor() FINALLY [PSD_Pol_monitor:0] 0.00 % ( 0.0/ 625000.0) # McStas 3.x-dev - May. 13, 2025: Simulation stop (abort). # McStas 3.x-dev - May. 13, 2025: Simulation stop (abort). # Date: Wed May 14 01:16:46 2025 # Started: Wed May 14 01:16:44 2025 # McStas 3.x-dev - May. 13, 2025: Simulation stop (abort). # Last I/O Error: Bad file descriptor # Last I/O Error: Bad file descriptor # Last I/O Error: Bad file descriptor # McStas 3.x-dev - May. 13, 2025: [pid 712318] Signal 11 detected [proc 15] SIGSEGV (Mem Error) # Simulation: Supermirror_thin_substrate (Supermirror_thin_substrate.instr) # Breakpoint: [_Polmap_average_finally] component Polmap_average=PSD_Pol_monitor() FINALLY [PSD_Pol_monitor:0] 0.00 % ( 0.0/ 625000.0) # Date: Wed May 14 01:16:46 2025 # Started: Wed May 14 01:16:44 2025 # McStas 3.x-dev - May. 13, 2025: Simulation stop (abort). # McStas 3.x-dev - May. 13, 2025: [pid 712316] Signal 11 detected [proc 13] SIGSEGV (Mem Error) # Simulation: Supermirror_thin_substrate (Supermirror_thin_substrate.instr) # Breakpoint: [_Polmap_average_finally] component Polmap_average=PSD_Pol_monitor() FINALLY [PSD_Pol_monitor:0] 0.00 % ( 0.0/ 625000.0) # McStas 3.x-dev - May. 13, 2025: [pid 712313] Signal 11 detected [proc 10] SIGSEGV (Mem Error) # Simulation: Supermirror_thin_substrate (Supermirror_thin_substrate.instr) # Breakpoint: [_Polmap_average_finally] component Polmap_average=PSD_Pol_monitor() FINALLY [PSD_Pol_monitor:0] 0.00 % ( 0.0/ 625000.0) # Date: Wed May 14 01:16:46 2025 # Started: Wed May 14 01:16:44 2025 # McStas 3.x-dev - May. 13, 2025: Simulation stop (abort). # Date: Wed May 14 01:16:46 2025 # Started: Wed May 14 01:16:44 2025 # McStas 3.x-dev - May. 13, 2025: Simulation stop (abort). # Last I/O Error: Bad file descriptor # McStas 3.x-dev - May. 13, 2025: [pid 712311] Signal 11 detected [proc 8] SIGSEGV (Mem Error) # Simulation: Supermirror_thin_substrate (Supermirror_thin_substrate.instr) # Breakpoint: [_Polmap_average_finally] component Polmap_average=PSD_Pol_monitor() FINALLY [PSD_Pol_monitor:0] 0.00 % ( 0.0/ 625000.0) # Date: Wed May 14 01:16:46 2025 # Started: Wed May 14 01:16:44 2025 # McStas 3.x-dev - May. 13, 2025: Simulation stop (abort). # Last I/O Error: Bad file descriptor # McStas 3.x-dev - May. 13, 2025: [pid 712317] Signal 11 detected [proc 14] SIGSEGV (Mem Error) # Simulation: Supermirror_thin_substrate (Supermirror_thin_substrate.instr) # Breakpoint: [_Polmap_average_finally] component Polmap_average=PSD_Pol_monitor() FINALLY [PSD_Pol_monitor:0] 0.00 % ( 0.0/ 625000.0) # Date: Wed May 14 01:16:46 2025 # Started: Wed May 14 01:16:44 2025 # McStas 3.x-dev - May. 13, 2025: Simulation stop (abort). # Last I/O Error: Bad file descriptor -------------------------------------------------------------------------- prterun noticed that process rank 14 with PID 712317 on node elearn1 exited on signal 3 (Quit). -------------------------------------------------------------------------- INFO: call to mpirun failed with Command 'mpirun -np 16 ./Supermirror_thin_substrate.out --trace=0 --seed=1000 --ncount=10000000.0 --dir=1 --format=McCode --bufsiz=10000000 src_x=0.01' returned non-zero exit status 131. Traceback (most recent call last): File "/home/nexmap/pkwi/McStas/mcstas/3.x-dev/tools/Python/mcrun/mcrun.py", line 616, in main() File "/home/nexmap/pkwi/McStas/mcstas/3.x-dev/tools/Python/mcrun/mcrun.py", line 588, in main mcstas.run() # in mccode.py ^^^^^^^^^^^^ File "/home/nexmap/pkwi/McStas/mcstas/3.x-dev/tools/Python/mcrun/mccode.py", line 347, in run return self.runMPI(args, pipe, override_mpi) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/nexmap/pkwi/McStas/mcstas/3.x-dev/tools/Python/mcrun/mccode.py", line 401, in runMPI return Process(binpath).run(args, pipe=pipe) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/nexmap/pkwi/McStas/mcstas/3.x-dev/tools/Python/mcrun/mccode.py", line 77, in run raise err File "/home/nexmap/pkwi/McStas/mcstas/3.x-dev/tools/Python/mcrun/mccode.py", line 73, in run proc = run(command, shell=True, check=True, text=True, capture_output=pipe) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/nexmap/pkwi/McStas/mcstas/3.x-dev/miniconda3/lib/python3.12/subprocess.py", line 571, in run raise CalledProcessError(retcode, process.args, subprocess.CalledProcessError: Command 'mpirun -np 16 ./Supermirror_thin_substrate.out --trace=0 --seed=1000 --ncount=10000000.0 --dir=1 --format=McCode --bufsiz=10000000 src_x=0.01' returned non-zero exit status 131.