INFO: Using directory: "1" INFO: Using existing c-file: ./Test_StatisticalChopper.c INFO: Using existing binary: ./Test_StatisticalChopper.out INFO: === [Test_StatisticalChopper] Initialize StatisticalChopper: chop1: frequency=349.882 [Hz] 20992.9 [rpm] time frame=0.0028581 [s] phase=0 [deg] height=0.5 [m], slits centered at radius=0.25 [m] StatisticalChopper: chop1: Sequence length=255 with 127 apertures; duty cycle c=0.496063 [Test_StatisticalChopper] Initialize StatisticalChopper: chop1: frequency=349.882 [Hz] 20992.9 [rpm] time frame=0.0028581 [s] phase=0 [deg] height=0.5 [m], slits centered at radius=0.25 [m] StatisticalChopper: chop1: Sequence length=255 with 127 apertures; duty cycle c=0.496063 [Test_StatisticalChopper] Initialize StatisticalChopper: chop1: frequency=349.882 [Hz] 20992.9 [rpm] time frame=0.0028581 [s] phase=0 [deg] height=0.5 [m], slits centered at radius=0.25 [m] StatisticalChopper: chop1: Sequence length=255 with 127 apertures; duty cycle c=0.496063 [Test_StatisticalChopper] Initialize StatisticalChopper: chop1: frequency=349.882 [Hz] 20992.9 [rpm] time frame=0.0028581 [s] phase=0 [deg] height=0.5 [m], slits centered at radius=0.25 [m] StatisticalChopper: chop1: Sequence length=255 with 127 apertures; duty cycle c=0.496063 [Test_StatisticalChopper] Initialize StatisticalChopper: chop1: frequency=349.882 [Hz] 20992.9 [rpm] time frame=0.0028581 [s] phase=0 [deg] height=0.5 [m], slits centered at radius=0.25 [m] StatisticalChopper: chop1: Sequence length=255 with 127 apertures; duty cycle c=0.496063 [Test_StatisticalChopper] Initialize StatisticalChopper: chop1: frequency=349.882 [Hz] 20992.9 [rpm] time frame=0.0028581 [s] phase=0 [deg] height=0.5 [m], slits centered at radius=0.25 [m] StatisticalChopper: chop1: Sequence length=255 with 127 apertures; duty cycle c=0.496063 [Test_StatisticalChopper] Initialize StatisticalChopper: chop1: frequency=349.882 [Hz] 20992.9 [rpm] time frame=0.0028581 [s] phase=0 [deg] height=0.5 [m], slits centered at radius=0.25 [m] StatisticalChopper: chop1: Sequence length=255 with 127 apertures; duty cycle c=0.496063 [Test_StatisticalChopper] Initialize StatisticalChopper: chop1: frequency=349.882 [Hz] 20992.9 [rpm] time frame=0.0028581 [s] phase=0 [deg] height=0.5 [m], slits centered at radius=0.25 [m] StatisticalChopper: chop1: Sequence length=255 with 127 apertures; duty cycle c=0.496063 Simulation 'Test_StatisticalChopper' (Test_StatisticalChopper.instr): running on 16 nodes (master is 'elearn1.fysik.dtu.dk', MPI version 3.1). [Test_StatisticalChopper] Initialize StatisticalChopper: chop1: frequency=349.882 [Hz] 20992.9 [rpm] time frame=0.0028581 [s] phase=0 [deg] height=0.5 [m], slits centered at radius=0.25 [m] StatisticalChopper: chop1: Sequence length=255 with 127 apertures; duty cycle c=0.496063 [Test_StatisticalChopper] Initialize StatisticalChopper: chop1: frequency=349.882 [Hz] 20992.9 [rpm] time frame=0.0028581 [s] phase=0 [deg] height=0.5 [m], slits centered at radius=0.25 [m] StatisticalChopper: chop1: Sequence length=255 with 127 apertures; duty cycle c=0.496063 [Test_StatisticalChopper] Initialize StatisticalChopper: chop1: frequency=349.882 [Hz] 20992.9 [rpm] time frame=0.0028581 [s] phase=0 [deg] height=0.5 [m], slits centered at radius=0.25 [m] StatisticalChopper: chop1: Sequence length=255 with 127 apertures; duty cycle c=0.496063 [Test_StatisticalChopper] Initialize StatisticalChopper: chop1: frequency=349.882 [Hz] 20992.9 [rpm] time frame=0.0028581 [s] phase=0 [deg] height=0.5 [m], slits centered at radius=0.25 [m] StatisticalChopper: chop1: Sequence length=255 with 127 apertures; duty cycle c=0.496063 [Test_StatisticalChopper] Initialize StatisticalChopper: chop1: frequency=349.882 [Hz] 20992.9 [rpm] time frame=0.0028581 [s] phase=0 [deg] height=0.5 [m], slits centered at radius=0.25 [m] StatisticalChopper: chop1: Sequence length=255 with 127 apertures; duty cycle c=0.496063 [Test_StatisticalChopper] Initialize StatisticalChopper: chop1: frequency=349.882 [Hz] 20992.9 [rpm] time frame=0.0028581 [s] phase=0 [deg] height=0.5 [m], slits centered at radius=0.25 [m] StatisticalChopper: chop1: Sequence length=255 with 127 apertures; duty cycle c=0.496063 [Test_StatisticalChopper] Initialize StatisticalChopper: chop1: frequency=349.882 [Hz] 20992.9 [rpm] time frame=0.0028581 [s] phase=0 [deg] height=0.5 [m], slits centered at radius=0.25 [m] StatisticalChopper: chop1: Sequence length=255 with 127 apertures; duty cycle c=0.496063 [Test_StatisticalChopper] Initialize Monitor_nD: before_stat_chop is using automatic limits option 'auto' together with MPI. WARNING this may create incorrect distributions (but integrated flux will be right). StatisticalChopper: chop1: frequency=349.882 [Hz] 20992.9 [rpm] time frame=0.0028581 [s] phase=0 [deg] height=0.5 [m], slits centered at radius=0.25 [m] StatisticalChopper: chop1: Sequence length=255 with 127 apertures; duty cycle c=0.496063 Monitor_nD: after_stat_chop is using automatic limits option 'auto' together with MPI. WARNING this may create incorrect distributions (but integrated flux will be right). Isotropic_Sqw: Sample: is a box: width=0.005000 height=0.050000 depth=0.002000 Opening input file '/home/nexmap/pkwi/McStas/mcstas/3.x-dev/data/Na2Ca3Al2F14.laz' (Table_Read_Offset) Opening input file '/home/nexmap/pkwi/McStas/mcstas/3.x-dev/data/Na2Ca3Al2F14.laz' (Table_Read_Offset) Isotropic_sqw: Converting 841 powder lines from Na2Ca3Al2F14.laz into S(q,w) data Isotropic_sqw: q range [0:12.5538], creating 1310 elements vector Isotropic_Sqw: Sample: Generated Na2Ca3Al2F14.laz coherent Sqw q=[0:12.5442 Angs-1] w=[0:0 meV] |S|=0.0349521 size=[1310x1] sigma=283.56 [barns] Mainly elastic scattering. Isotropic_Sqw: Sample: Using Isotropic elastic incoherent scattering (sigma=13.6704 [barns]) Isotropic_Sqw: Sample: Sample temperature not defined (T=0). Warning Disabling detailed balance. Isotropic_Sqw: Sample: Focusing can only apply for single scattering. Setting to order=1. Monitor_nD: ChopMon2 is using automatic limits option 'auto' together with MPI. WARNING this may create incorrect distributions (but integrated flux will be right). Failed to create component NeXus component Geometry group Monitor_nD: time_mon2 is using automatic limits option 'auto' together with MPI. WARNING this may create incorrect distributions (but integrated flux will be right). *** TRACE end *** Save [Test_StatisticalChopper] Detector: before_stat_chop_I=2.34617e-08 before_stat_chop_ERR=7.41924e-12 before_stat_chop_N=1e+07 "before_stat_chop_1747183840.t" Detector: after_stat_chop_I=1.16857e-08 after_stat_chop_ERR=5.23608e-12 after_stat_chop_N=4.98074e+06 "after_stat_chop_1747183840.t" Detector: ChopMon2_I=3.52107e-12 ChopMon2_ERR=5.91179e-16 ChopMon2_N=4.09716e+07 "ChopMon2_1747183840.t_y" Detector: ChopMon2_I=2.81134e-11 ChopMon2_ERR=4.0391e-18 ChopMon2_N=6.55546e+10 "NULL_corr.dat" Finally [Test_StatisticalChopper: 1]. Time: 3 [s] Finally [Test_StatisticalChopper: 1]. Time: 3 [s] Finally [Test_StatisticalChopper: 1]. Time: 3 [s] Finally [Test_StatisticalChopper: 1]. Time: 3 [s] Finally [Test_StatisticalChopper: 1]. Time: 3 [s] Finally [Test_StatisticalChopper: 1]. Time: 3 [s] Finally [Test_StatisticalChopper: 1]. Time: 3 [s] Finally [Test_StatisticalChopper: 1]. Time: 3 [s] Detector: time_mon2_I=3.44302e-12 time_mon2_ERR=5.8426e-16 time_mon2_N=4.00989e+07 "time_mon2_1747183840.t" Finally [Test_StatisticalChopper: 1]. Time: 3 [s] Isotropic_Sqw: Sample: Scattering fraction=0.0160659 of incoming intensity Absorption fraction =0.0696205 Single scattering intensity =4.2165e-12 (coh=3.50068e-12 inc=7.15821e-13) Multiple scattering intensity =0 Finally [Test_StatisticalChopper: 1]. Time: 3 [s] Finally [Test_StatisticalChopper: 1]. Time: 3 [s] Finally [Test_StatisticalChopper: 1]. Time: 3 [s] Finally [Test_StatisticalChopper: 1]. Time: 3 [s] Finally [Test_StatisticalChopper: 1]. Time: 3 [s] Finally [Test_StatisticalChopper: 1]. Time: 3 [s] Finally [Test_StatisticalChopper: 1]. Time: 3 [s] INFO: Placing instr file copy Test_StatisticalChopper.instr in dataset 1 INFO: Placing generated c-code copy Test_StatisticalChopper.c in dataset 1