INFO: No output directory specified (--dir) INFO: Using directory: "Demonstration_20250514_034925" INFO: Regenerating c-file: Demonstration.c DEBUG: CMD: /u/data/pkwi/McStas/mcstas/3.x-dev/bin/mcstas -t -o ./Demonstration.c Demonstration.instr Warning: DECLARE block contains 2 assignments (= sign). Move them into an INITIALIZE section. May fail at compile. CFLAGS= -DFUNNEL WARNING: The parameter format of Al_powder is initialized using a static {,,,} vector. -> Such static vectors support literal numbers ONLY. -> Any vector use of variables or defines must happen via a DECLARE/INITIALIZE pointer. ----------------------------------------------------------- Generating single GPU kernel or single CPU section layout: ----------------------------------------------------------- Generating GPU/CPU -DFUNNEL layout: Component test_sample is NOACC, CPUONLY=1 -> FUNNEL mode enabled, SPLIT within buffer. -> CPU section from component test_sample -> GPU kernel from component detector_position ----------------------------------------------------------- DEBUG: CMD: /u/data/pkwi/McStas/mcstas/3.x-dev/bin/mcstas finished INFO: Recompiling: ./Demonstration.out DEBUG: CMD: nvc -o ./Demonstration.out ./Demonstration.c -lm -Wl,-O2 -Wl,--sort-common -Wl,--as-needed -Wl,-z,relro -Wl,-z,now -Wl,--disable-new-dtags -Wl,--gc-sections -Wl,--allow-shlib-undefined -Wl,-rpath,/u/data/pkwi/McStas/mcstas/3.x-dev/miniconda3/lib -Wl,-rpath-link,/u/data/pkwi/McStas/mcstas/3.x-dev/miniconda3/lib -L/u/data/pkwi/McStas/mcstas/3.x-dev/miniconda3/lib -mtune=haswell -fPIC -O2 -isystem /u/data/pkwi/McStas/mcstas/3.x-dev/miniconda3/include -fast -Minfo=accel -acc=gpu -gpu=mem:managed -DOPENACC -DFUNNEL "./Demonstration.c", line 93: warning: Routine "mcgenstate" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] _class_particle mcgenstate(void); ^ Remark: individual warnings can be suppressed with "--diag_suppress " "./Demonstration.c", line 95: warning: Routine "mcsetstate" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] _class_particle mcsetstate(double x, double y, double z, double vx, double vy, double vz, ^ "./Demonstration.c", line 98: warning: Routine "mcgetstate" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] _class_particle mcgetstate(_class_particle mcneutron, double *x, double *y, double *z, ^ "./Demonstration.c", line 114: warning: Routine "particle_getvar" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] double particle_getvar(_class_particle *p, char *name, int *suc); ^ "./Demonstration.c", line 118: warning: Routine "str_comp" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] int str_comp(char *str1, char *str2); ^ "./Demonstration.c", line 150: warning: Routine "particle_getvar_void" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] void* particle_getvar_void(_class_particle *p, char *name, int *suc); ^ "./Demonstration.c", line 118: warning: Routine "str_comp" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] int str_comp(char *str1, char *str2); ^ "./Demonstration.c", line 183: warning: Routine "particle_setvar_void" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] int particle_setvar_void(_class_particle *, char *, void*); ^ "./Demonstration.c", line 209: warning: Routine "particle_setvar_void_array" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] int particle_setvar_void_array(_class_particle *, char *, void*, int); ^ "./Demonstration.c", line 220: warning: Routine "particle_restore" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] void particle_restore(_class_particle *p, _class_particle *p0); ^ "./Demonstration.c", line 231: warning: Routine "particle_getuservar_byid" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] double particle_getuservar_byid(_class_particle *p, int id, int *suc){ ^ "./Demonstration.c", line 245: warning: Routine "particle_uservar_init" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] void particle_uservar_init(_class_particle *p){ ^ "./Demonstration.c", line 321: warning: Routine "noprintf" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] int noprintf(); ^ "./Demonstration.c", line 323: warning: Routine "str_len" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] size_t str_len(const char *s); ^ "./Demonstration.c", line 673: warning: Routine "mcget_ncount" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] unsigned long long int mcget_ncount(void); /* wrapper to set mcncount */ ^ "./Demonstration.c", line 894: warning: Routine "_randnorm2" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] double _randnorm2(randstate_t* state); ^ "./Demonstration.c", line 911: warning: Routine "kiss_srandom" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] uint64_t *kiss_srandom(uint64_t state[7], uint64_t seed); ^ "./Demonstration.c", line 913: warning: Routine "kiss_random" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] uint64_t kiss_random(uint64_t state[7]); ^ "./Demonstration.c", line 921: warning: Routine "_rand01" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] double _rand01(randstate_t* state); ^ "./Demonstration.c", line 923: warning: Routine "_randpm1" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] double _randpm1(randstate_t* state); ^ "./Demonstration.c", line 925: warning: Routine "_rand0max" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] double _rand0max(double max, randstate_t* state); ^ "./Demonstration.c", line 927: warning: Routine "_randminmax" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] double _randminmax(double min, double max, randstate_t* state); ^ "./Demonstration.c", line 929: warning: Routine "_randtriangle" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] double _randtriangle(randstate_t* state); ^ "./Demonstration.c", line 1025: warning: Routine "coords_set" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] Coords coords_set(MCNUM x, MCNUM y, MCNUM z); ^ "./Demonstration.c", line 1027: warning: Routine "coords_get" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] Coords coords_get(Coords a, MCNUM *x, MCNUM *y, MCNUM *z); ^ "./Demonstration.c", line 1029: warning: Routine "coords_add" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] Coords coords_add(Coords a, Coords b); ^ "./Demonstration.c", line 1031: warning: Routine "coords_sub" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] Coords coords_sub(Coords a, Coords b); ^ "./Demonstration.c", line 1033: warning: Routine "coords_neg" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] Coords coords_neg(Coords a); ^ "./Demonstration.c", line 1035: warning: Routine "coords_scale" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] Coords coords_scale(Coords b, double scale); ^ "./Demonstration.c", line 1037: warning: Routine "coords_sp" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] double coords_sp(Coords a, Coords b); ^ "./Demonstration.c", line 1039: warning: Routine "coords_xp" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] Coords coords_xp(Coords b, Coords c); ^ "./Demonstration.c", line 1041: warning: Routine "coords_len" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] double coords_len(Coords a); ^ "./Demonstration.c", line 4596: warning: variable "num" was declared but never referenced [declared_but_not_referenced] int num = 3; ^ "./Demonstration.c", line 5051: warning: variable "randstate" was declared but never referenced [declared_but_not_referenced] randstate_t randstate[7]; ^ "./Demonstration.c", line 4970: warning: variable "newlen" was declared but never referenced [declared_but_not_referenced] long newlen = 0; ^ "./Demonstration.c", line 6297: warning: variable "status" was set but never used [set_but_not_used] int status; ^ "./Demonstration.c", line 8323: warning: variable "output" was declared but never referenced [declared_but_not_referenced] struct tagging_tree_node_struct *output; ^ "./Demonstration.c", line 8847: warning: variable "permanent_list_length" was declared but never referenced [declared_but_not_referenced] int volume_index,iterate,permanent_list_length = 0; ^ "./Demonstration.c", line 8870: warning: variable "geometry_output" was set but never used [set_but_not_used] int geometry_output; ^ "./Demonstration.c", line 9358: warning: variable "x_vector" was declared but never referenced [declared_but_not_referenced] Coords x_vector = geometry->geometry_parameters.p_box_storage->x_vector; ^ "./Demonstration.c", line 9359: warning: variable "y_vector" was declared but never referenced [declared_but_not_referenced] Coords y_vector = geometry->geometry_parameters.p_box_storage->y_vector; ^ "./Demonstration.c", line 9360: warning: variable "z_vector" was declared but never referenced [declared_but_not_referenced] Coords z_vector = geometry->geometry_parameters.p_box_storage->z_vector; ^ "./Demonstration.c", line 9520: warning: variable "center" was declared but never referenced [declared_but_not_referenced] Coords center = geometry->center; ^ "./Demonstration.c", line 9740: warning: variable "output" was set but never used [set_but_not_used] int output; ^ "./Demonstration.c", line 9899: warning: variable "radius_top" was declared but never referenced [declared_but_not_referenced] double radius_top = geometry->geometry_parameters.p_cone_storage->cone_radius_top; ^ "./Demonstration.c", line 9900: warning: variable "radius_bottom" was declared but never referenced [declared_but_not_referenced] double radius_bottom = geometry->geometry_parameters.p_cone_storage->cone_radius_bottom; ^ "./Demonstration.c", line 10175: warning: statement is unreachable [code_is_unreachable] return 0; ^ "./Demonstration.c", line 9934: warning: variable "center" was declared but never referenced [declared_but_not_referenced] Coords center = geometry->center; ^ "./Demonstration.c", line 9936: warning: variable "normal_x" was declared but never referenced [declared_but_not_referenced] double *normal_x = geometry->geometry_parameters.p_mesh_storage->normal_x; ^ "./Demonstration.c", line 9937: warning: variable "normal_y" was declared but never referenced [declared_but_not_referenced] double *normal_y = geometry->geometry_parameters.p_mesh_storage->normal_y; ^ "./Demonstration.c", line 9938: warning: variable "normal_z" was declared but never referenced [declared_but_not_referenced] double *normal_z = geometry->geometry_parameters.p_mesh_storage->normal_z; ^ "./Demonstration.c", line 9962: warning: variable "verbal" was declared but never referenced [declared_but_not_referenced] int verbal = 0; ^ "./Demonstration.c", line 9971: warning: variable "tmp" was declared but never referenced [declared_but_not_referenced] Coords edge1,edge2,h,s,q,tmp,intersect_pos; ^ "./Demonstration.c", line 9971: warning: variable "intersect_pos" was declared but never referenced [declared_but_not_referenced] Coords edge1,edge2,h,s,q,tmp,intersect_pos; ^ "./Demonstration.c", line 9973: warning: variable "this_facet_t" was declared but never referenced [declared_but_not_referenced] double this_facet_t; ^ "./Demonstration.c", line 10022: warning: variable "C1" was declared but never referenced [declared_but_not_referenced] int C1 = counter; ^ "./Demonstration.c", line 10189: warning: variable "normal_x" was declared but never referenced [declared_but_not_referenced] double *normal_x = geometry->geometry_parameters.p_mesh_storage->normal_x; ^ "./Demonstration.c", line 10190: warning: variable "normal_y" was declared but never referenced [declared_but_not_referenced] double *normal_y = geometry->geometry_parameters.p_mesh_storage->normal_y; ^ "./Demonstration.c", line 10191: warning: variable "normal_z" was declared but never referenced [declared_but_not_referenced] double *normal_z = geometry->geometry_parameters.p_mesh_storage->normal_z; ^ "./Demonstration.c", line 10220: warning: variable "center" was declared but never referenced [declared_but_not_referenced] Coords center = geometry->center; ^ "./Demonstration.c", line 10278: warning: variable "output" was set but never used [set_but_not_used] int output; ^ "./Demonstration.c", line 10294: warning: variable "tmp" was declared but never referenced [declared_but_not_referenced] Coords edge1,edge2,h,s,q,tmp,intersect_pos; ^ "./Demonstration.c", line 10294: warning: variable "intersect_pos" was declared but never referenced [declared_but_not_referenced] Coords edge1,edge2,h,s,q,tmp,intersect_pos; ^ "./Demonstration.c", line 10295: warning: variable "UNION_EPSILON" was declared but never referenced [declared_but_not_referenced] double UNION_EPSILON = 0.0000001; ^ "./Demonstration.c", line 10296: warning: variable "this_facet_t" was declared but never referenced [declared_but_not_referenced] double this_facet_t; ^ "./Demonstration.c", line 10733: warning: variable "vector2" is used before its value is set [used_before_set] if (verbal == 1) printf("vector1 = (%f,%f,%f)\n",vector1.x,vector1.y,vector2.z); ^ "./Demonstration.c", line 10722: warning: variable "seperated" was declared but never referenced [declared_but_not_referenced] int seperated = 0; ^ "./Demonstration.c", line 10799: warning: variable "seperated" was declared but never referenced [declared_but_not_referenced] int seperated = 0; ^ "./Demonstration.c", line 11006: warning: variable "seperated" was declared but never referenced [declared_but_not_referenced] int seperated = 0; ^ "./Demonstration.c", line 11104: warning: variable "solutions" was declared but never referenced [declared_but_not_referenced] int iterate,number_of_solutions,solutions,number_of_positions = 30; ^ "./Demonstration.c", line 11290: warning: variable "seperated" was declared but never referenced [declared_but_not_referenced] int seperated = 0; ^ "./Demonstration.c", line 11483: warning: variable "Y" was declared but never referenced [declared_but_not_referenced] double Y; ^ "./Demonstration.c", line 11484: warning: variable "max_r" was declared but never referenced [declared_but_not_referenced] double max_r; ^ "./Demonstration.c", line 12018: warning: variable "Y" was declared but never referenced [declared_but_not_referenced] double Y; ^ "./Demonstration.c", line 12019: warning: variable "max_r" was declared but never referenced [declared_but_not_referenced] double max_r; ^ "./Demonstration.c", line 12418: warning: variable "square_center" is used before its value is set [used_before_set] Coords box_end_point = coords_sub(coords_set(0,0,-z_depth/2),square_center); ^ "./Demonstration.c", line 12278: warning: variable "is_rectangle" was declared but never referenced [declared_but_not_referenced] int is_rectangle = geometry_box->geometry_parameters.p_box_storage->is_rectangle; ^ "./Demonstration.c", line 12283: warning: variable "y_height2" was declared but never referenced [declared_but_not_referenced] double y_height2 = geometry_box->geometry_parameters.p_box_storage->y_height2; ^ "./Demonstration.c", line 12284: warning: variable "x_vector" was declared but never referenced [declared_but_not_referenced] Coords x_vector = geometry_box->geometry_parameters.p_box_storage->x_vector; ^ "./Demonstration.c", line 12285: warning: variable "y_vector" was declared but never referenced [declared_but_not_referenced] Coords y_vector = geometry_box->geometry_parameters.p_box_storage->y_vector; ^ "./Demonstration.c", line 12292: warning: variable "Y" was declared but never referenced [declared_but_not_referenced] double Y; ^ "./Demonstration.c", line 12293: warning: variable "max_r" was declared but never referenced [declared_but_not_referenced] double max_r; ^ "./Demonstration.c", line 12416: warning: variable "square_offset" was declared but never referenced [declared_but_not_referenced] double square_offset; ^ "./Demonstration.c", line 12682: warning: variable "debug_dist" was set but never used [set_but_not_used] double debug_dist; ^ "./Demonstration.c", line 12748: warning: variable "seperated" was declared but never referenced [declared_but_not_referenced] int seperated = 0; ^ "./Demonstration.c", line 12934: warning: variable "temp_pointer" was declared but never referenced [declared_but_not_referenced] int *temp_pointer; ^ "./Demonstration.c", line 12937: warning: variable "mask_global_index" was declared but never referenced [declared_but_not_referenced] int this_mask_status,mask_index,mask_global_index; ^ "./Demonstration.c", line 13094: warning: variable "temp_pointer" was declared but never referenced [declared_but_not_referenced] int *temp_pointer; ^ "./Demonstration.c", line 13097: warning: variable "mask_global_index" was declared but never referenced [declared_but_not_referenced] int this_mask_status,mask_index,mask_global_index; ^ "./Demonstration.c", line 14016: warning: variable "found_index" was declared but never referenced [declared_but_not_referenced] int mask_index,mask_mode,found_index,logic_ALL; ^ "./Demonstration.c", line 13925: warning: variable "mask_index" was declared but never referenced [declared_but_not_referenced] int volume_index,mask_volume_number,mask_index; ^ "./Demonstration.c", line 14228: warning: variable "mask_index" was declared but never referenced [declared_but_not_referenced] int volume_index,iterate,parent,mask_index,masked_volume_index,ANY_logic,true_parent_volume_number; ^ "./Demonstration.c", line 14418: warning: variable "found_index" was declared but never referenced [declared_but_not_referenced] int volume_index,iterate,iterate2,found_index,I_index,I_volume; ^ "./Demonstration.c", line 14567: warning: variable "string_output" was declared but never referenced [declared_but_not_referenced] char string_output[124]; ^ "./Demonstration.c", line 14971: warning: variable "mask_index" was declared but never referenced [declared_but_not_referenced] int volume_index,iterate,mask_index; ^ "./Demonstration.c", line 15670: warning: Routine "Table_Index" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] double Table_Index(t_Table Table, long i, long j); /* get indexed value */ ^ "./Demonstration.c", line 15672: warning: Routine "Table_Value" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] double Table_Value(t_Table Table, double X, long j); /* search X in 1st column and return interpolated value in j-column */ ^ "./Demonstration.c", line 15679: warning: Routine "Table_Value2d" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] double Table_Value2d(t_Table Table, double X, double Y); /* same as Table_Index with non-integer indices and 2d interpolation */ ^ "./Demonstration.c", line 15699: warning: Routine "Table_Interp1d" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] double Table_Interp1d(double x, double x1, double y1, double x2, double y2); ^ "./Demonstration.c", line 15701: warning: Routine "Table_Interp1d_nearest" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] double Table_Interp1d_nearest(double x, double x1, double y1, double x2, double y2); ^ "./Demonstration.c", line 15703: warning: Routine "Table_Interp2d" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] double Table_Interp2d(double x, double y, double x1, double y1, double x2, double y2, ^ "./Demonstration.c", line 17249: warning: Routine "off_intersect_all" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] int off_intersect_all(double* t0, double* t3, ^ "./Demonstration.c", line 17272: warning: Routine "off_intersect" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] int off_intersect(double* t0, double* t3, ^ "./Demonstration.c", line 17293: warning: Routine "off_x_intersect" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] int off_x_intersect(double *l0,double *l3, ^ "./Demonstration.c", line 17376: warning: Routine "off_F" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] double off_F(double x, double y,double z,double A,double B,double C,double D) { ^ "./Demonstration.c", line 17381: warning: Routine "off_sign" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] char off_sign(double a) { ^ "./Demonstration.c", line 17390: warning: Routine "off_normal" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] void off_normal(Coords* n, polygon p) ^ "./Demonstration.c", line 17416: warning: Routine "off_pnpoly" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] int off_pnpoly(polygon p, Coords v) ^ "./Demonstration.c", line 17419: warning: variable "minx" was declared but never referenced [declared_but_not_referenced] MCNUM minx=FLT_MAX,maxx=-FLT_MAX,miny=FLT_MAX,maxy=-FLT_MAX,minz=FLT_MAX,maxz=-FLT_MAX; ^ "./Demonstration.c", line 17419: warning: variable "maxx" was declared but never referenced [declared_but_not_referenced] MCNUM minx=FLT_MAX,maxx=-FLT_MAX,miny=FLT_MAX,maxy=-FLT_MAX,minz=FLT_MAX,maxz=-FLT_MAX; ^ "./Demonstration.c", line 17419: warning: variable "miny" was declared but never referenced [declared_but_not_referenced] MCNUM minx=FLT_MAX,maxx=-FLT_MAX,miny=FLT_MAX,maxy=-FLT_MAX,minz=FLT_MAX,maxz=-FLT_MAX; ^ "./Demonstration.c", line 17419: warning: variable "maxy" was declared but never referenced [declared_but_not_referenced] MCNUM minx=FLT_MAX,maxx=-FLT_MAX,miny=FLT_MAX,maxy=-FLT_MAX,minz=FLT_MAX,maxz=-FLT_MAX; ^ "./Demonstration.c", line 17419: warning: variable "minz" was declared but never referenced [declared_but_not_referenced] MCNUM minx=FLT_MAX,maxx=-FLT_MAX,miny=FLT_MAX,maxy=-FLT_MAX,minz=FLT_MAX,maxz=-FLT_MAX; ^ "./Demonstration.c", line 17419: warning: variable "maxz" was declared but never referenced [declared_but_not_referenced] MCNUM minx=FLT_MAX,maxx=-FLT_MAX,miny=FLT_MAX,maxy=-FLT_MAX,minz=FLT_MAX,maxz=-FLT_MAX; ^ "./Demonstration.c", line 17479: warning: Routine "off_intersectPoly" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] int off_intersectPoly(intersection *inter, Coords a, Coords b, polygon p) ^ "./Demonstration.c", line 17609: warning: Routine "off_init_planes" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] void off_init_planes(Coords a, Coords b, ^ "./Demonstration.c", line 17653: warning: Routine "off_clip_3D_mod" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] int off_clip_3D_mod(intersection* t, Coords a, Coords b, ^ "./Demonstration.c", line 17776: warning: variable "plane_Eq" was declared but never referenced [declared_but_not_referenced] double plane_Eq [4]; ^ "./Demonstration.c", line 17890: warning: Routine "off_compare" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] int off_compare (void const *a, void const *b) ^ "./Demonstration.c", line 17902: warning: Routine "off_cleanDouble" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] int off_cleanDouble(intersection* t, int* t_size) ^ "./Demonstration.c", line 17937: warning: Routine "off_cleanInOut" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] int off_cleanInOut(intersection* t, int* t_size) ^ "./Demonstration.c", line 18189: warning: Routine "Min_int" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] int Min_int(int x, int y) { ^ "./Demonstration.c", line 18195: warning: Routine "merge" will be treated as sequential because its "routine" directive doesn't specify a level of parallelism [no_routine_type] void merge(intersection *arr, int l, int m, int r) ^ "./Demonstration.c", line 19025: warning: variable "count" is used before its value is set [used_before_set] for(line0=0; line0