INFO: Using directory: "1" INFO: Using existing c-file: ./ILL_H13_IN20.c INFO: Using existing binary: ./ILL_H13_IN20.out INFO: === Simulation 'ILL_H13_IN20' (/home/nexmap/pkwi/TESTS/2023-12-20/McStas_CPU_MPICC_KISS_1e7/ILL_H13_IN20/ILL_H13_IN20.instr): running on 8 nodes (master is 'panda2.fysik.dtu.dk', MPI version 3.1). templateTAS: Detailed TAS configuration * Incoming beam: EI=18.65 [meV] KI=3 [Angs-1] Vi=1888.87 [m/s] * Outgoing beam: EF=18.65 [meV] KF=3 [Angs-1] Vf=1888.87 [m/s] * Transfer: EN=0 [meV] QM=1 [Angs-1] templateTAS: Detailed TAS configuration * Incoming beam: EI=18.65 [meV] KI=3 [Angs-1] Vi=1888.87 [m/s] * Outgoing beam: EF=18.65 [meV] KF=3 [Angs-1] Vf=1888.87 [m/s] templateTAS: Detailed TAS configuration * Incoming beam: EI=18.65 [meV] KI=3 [Angs-1] Vi=1888.87 [m/s] * Outgoing beam: EF=18.65 [meV] KF=3 [Angs-1] Vf=1888.87 [m/s] * Transfer: EN=0 [meV] QM=1 [Angs-1] Angles: A1=19.39 A2=38.77 A3=0 A4=-19.19 A5=19.39 A6=38.77 [deg] templateTAS: Detailed TAS configuration * Incoming beam: EI=18.65 [meV] KI=3 [Angs-1] Vi=1888.87 [m/s] * Outgoing beam: EF=18.65 [meV] KF=3 [Angs-1] Vf=1888.87 [m/s] * Transfer: EN=0 [meV] QM=1 [Angs-1] Angles: A1=19.39 A2=38.77 A3=0 A4=-19.19 A5=19.39 A6=38.77 [deg] templateTAS: Detailed TAS configuration * Incoming beam: EI=18.65 [meV] KI=3 [Angs-1] Vi=1888.87 [m/s] * Outgoing beam: EF=18.65 [meV] KF=3 [Angs-1] Vf=1888.87 [m/s] * Transfer: EN=0 [meV] QM=1 [Angs-1] Angles: A1=19.39 A2=38.77 A3=0 A4=-19.19 A5=19.39 A6=38.77 [deg] Monochromator: DM=3.155 [Angs] RMH=6.655 [m] RMV=0.7332 [m] curved Analyzer: DA=3.155 [Angs] RAH=2.876 [m] RAV=0.3168 [m] curved Sample: Powder V.lau templateTAS: Detailed TAS configuration * Incoming beam: EI=18.65 [meV] KI=3 [Angs-1] Vi=1888.87 [m/s] * Outgoing beam: EF=18.65 [meV] KF=3 [Angs-1] Vf=1888.87 [m/s] * Transfer: EN=0 [meV] QM=1 [Angs-1] Angles: A1=19.39 A2=38.77 A3=0 A4=-19.19 A5=19.39 A6=38.77 [deg] Monochromator: DM=3.155 [Angs] RMH=6.655 [m] RMV=0.7332 [m] curved Analyzer: DA=3.155 [Angs] RAH=2.876 [m] RAV=0.3168 [m] curved Sample: Powder V.lau templateTAS: Detailed TAS configuration * Incoming beam: EI=18.65 [meV] KI=3 [Angs-1] Vi=1888.87 [m/s] * Outgoing beam: EF=18.65 [meV] KF=3 [Angs-1] Vf=1888.87 [m/s] * Transfer: EN=0 [meV] QM=1 [Angs-1] Angles: A1=19.39 A2=38.77 A3=0 A4=-19.19 A5=19.39 A6=38.77 [deg] Monochromator: DM=3.155 [Angs] RMH=6.655 [m] RMV=0.7332 [m] curved Analyzer: DA=3.155 [Angs] RAH=2.876 [m] RAV=0.3168 [m] curved Sample: Powder V.lau * Transfer: EN=0 [meV] QM=1 [Angs-1] Angles: A1=19.39 A2=38.77 A3=0 A4=-19.19 A5=19.39 A6=38.77 [deg] Monochromator: DM=3.155 [Angs] RMH=6.655 [m] RMV=0.7332 [m] curved Analyzer: DA=3.155 [Angs] RAH=2.876 [m] RAV=0.3168 [m] curved Sample: Powder V.lau Monochromator: DM=3.155 [Angs] RMH=6.655 [m] RMV=0.7332 [m] curved Analyzer: DA=3.155 [Angs] RAH=2.876 [m] RAV=0.3168 [m] curved Sample: Powder V.lau Monochromator: DM=3.155 [Angs] RMH=6.655 [m] RMV=0.7332 [m] curved Analyzer: DA=3.155 [Angs] RAH=2.876 [m] RAV=0.3168 [m] curved Sample: Powder V.lau Angles: A1=19.39 A2=38.77 A3=0 A4=-19.19 A5=19.39 A6=38.77 [deg] Monochromator: DM=3.155 [Angs] RMH=6.655 [m] RMV=0.7332 [m] curved Analyzer: DA=3.155 [Angs] RAH=2.876 [m] RAV=0.3168 [m] curved Sample: Powder V.lau [ILL_H13_IN20] Initialize [ILL_H13_IN20] Initialize templateTAS: Detailed TAS configuration * Incoming beam: EI=18.65 [meV] KI=3 [Angs-1] Vi=1888.87 [m/s] * Outgoing beam: EF=18.65 [meV] KF=3 [Angs-1] Vf=1888.87 [m/s] * Transfer: EN=0 [meV] QM=1 [Angs-1] Angles: A1=19.39 A2=38.77 A3=0 A4=-19.19 A5=19.39 A6=38.77 [deg] Monochromator: DM=3.155 [Angs] RMH=6.655 [m] RMV=0.7332 [m] curved Analyzer: DA=3.155 [Angs] RAH=2.876 [m] RAV=0.3168 [m] curved Sample: Powder V.lau [ILL_H13_IN20] Initialize [ILL_H13_IN20] Initialize [ILL_H13_IN20] Initialize [ILL_H13_IN20] Initialize [ILL_H13_IN20] Initialize [ILL_H13_IN20] Initialize Isotropic_Sqw: Sample: is a hollow cylinder: radius=0.010000 thickness=0.005000 height=0.050000 [J Comp Phys 228 (2009) 5251] Opening input file '/u/data/pkwi/McStas/mcstas/3.x-dev/data/V.lau' (Table_Read_Offset) Opening input file '/u/data/pkwi/McStas/mcstas/3.x-dev/data/V.lau' (Table_Read_Offset) Isotropic_sqw: Sample: Powder file probably of type Crystallographica/Fullprof (lau) WARNING: but F2 unit is set to powder_barns=1 (barns). Intensity might be 100 times too high. Isotropic_sqw: Converting 3558 powder lines from V.lau into S(q,w) data Isotropic_sqw: q range [0:25.0197], creating 423 elements vector Isotropic_Sqw: Sample: Generated V.lau coherent Sqw q=[0:24.9605 Angs-1] w=[0:0 meV] |S|=0.869429 size=[423x1] sigma=0.01834 [barns] Mainly elastic scattering. Isotropic_Sqw: Sample: Using Isotropic elastic incoherent scattering (sigma=5.07999 [barns]) Isotropic_Sqw: Sample: Sample temperature not defined (T=0). Warning Disabling detailed balance. *** TRACE end *** Save [ILL_H13_IN20] Detector: D4_SC2_1D_I=5.2503e+09 D4_SC2_1D_ERR=3.02874e+06 D4_SC2_1D_N=4.51833e+06 "D4_SC2_1D_1703029260.L" Detector: Sample_Cradle_I=5.433e+07 Sample_Cradle_ERR=78624.4 Sample_Cradle_N=992020 "Sample_Cradle" Detector: D7_SC3_1D_I=4.65559e+08 D7_SC3_1D_ERR=386845 D7_SC3_1D_N=1.58158e+07 "D7_SC3_1D_1703029260.th_E" Finally [ILL_H13_IN20: 1]. Time: 5 [s] Finally [ILL_H13_IN20: 1]. Time: 5 [s] Finally [ILL_H13_IN20: 1]. Time: 5 [s] Finally [ILL_H13_IN20: 1]. Time: 5 [s] Finally [ILL_H13_IN20: 1]. Time: 5 [s] Finally [ILL_H13_IN20: 1]. Time: 5 [s] Finally [ILL_H13_IN20: 1]. Time: 5 [s] Detector: He3H_I=248.905 He3H_ERR=2.6729 He3H_N=36433 "He3H.psd" Finally [ILL_H13_IN20: 1]. Time: 5 [s] Isotropic_Sqw: Sample: 47 neutron events (out of 7693954) that should have scattered were transmitted because scattering conditions WARNING could not be satisfied after 100 tries. Isotropic_Sqw: Sample: Scattering fraction=0.372882 of incoming intensity Absorption fraction =0.53755 Single scattering intensity =3.13641e+06 (coh=5798.39 inc=3.13061e+06) Multiple scattering intensity =0 INFO: Placing instr file copy /home/nexmap/pkwi/TESTS/2023-12-20/McStas_CPU_MPICC_KISS_1e7/ILL_H13_IN20/ILL_H13_IN20.instr in dataset 1