INFO: Using directory: "1"
INFO: Using existing c-file: ./HZB_FLEX.c
INFO: Using existing binary: ./HZB_FLEX.out
INFO: ===
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
[HZB_FLEX] Initialize
*** TRACE end *** 

Save [HZB_FLEX]
Detector: Before_selec_I=2.96927e+07 Before_selec_ERR=43839 Before_selec_N=828068 "PSD_monitor_before.dat"
Detector: After_selec_I=2.03618e+07 After_selec_ERR=36316.9 After_selec_N=483960 "PSD_monitor_after.dat"
Detector: energy_endguide_I=1.32513e+07 energy_endguide_ERR=28069.9 energy_endguide_N=328235 "energy-endguide.dat"
<E> : 4.97942 meV , E-width : 0.181572 meV 
Detector: energy_mono_I=4.32213e+06 energy_mono_ERR=16038.9 energy_mono_N=106222 "energy-mono.dat"
<E> : 4.97775 meV , E-width : 0.129647 meV 
Detector: energy_pre_sample_I=3.65287e+06 energy_pre_sample_ERR=14939.6 energy_pre_sample_N=76886 "energy-pre-sample.dat"
<E> : 4.97739 meV , E-width : 0.0812395 meV 
Detector: div_mono_I=4.06442e+06 div_mono_ERR=15646 div_mono_N=90703 "div-sample.dat"
Detector: div_mono_H_I=353005 div_mono_H_ERR=4582.05 div_mono_H_N=8794 "H-div-sample.dat"
Detector: psd_sam_I=4.33751e+06 psd_sam_ERR=16055.6 psd_sam_N=107405 "psd-sam.dat"
Detector: dpsd1_I=4.33751e+06 dpsd1_ERR=16055.6 dpsd1_N=107405 "linpsdsam.dat"

Finally [HZB_FLEX: 1]. Time: 7 [s] 
INFO: Placing instr file copy HZB_FLEX.instr in dataset 1
INFO: Placing generated c-code copy HZB_FLEX.c in dataset 1