INFO: Using directory: "1"
INFO: Using existing c-file: ./ILL_H142_IN12.c
INFO: Using existing binary: ./ILL_H142_IN12.out
INFO: ===
ILL_H142_IN12: Incoming wavelength lambda=2.36033 [Angs]
Instrument: ILL_H142 (H142@ILL cold guide on VCS).
templateTAS: Detailed TAS configuration
* Incoming beam: EI=14.68 [meV] KI=2.662 [Angs-1] Vi=1676.05 [m/s]
* Outgoing beam: EF=14.68 [meV] KF=2.662 [Angs-1] Vf=1676.05 [m/s]
* Transfer:     EN=0 [meV] QM=1 [Angs-1]
Angles: A1=20.6 A2=41.2 A3=0 A4=-21.65 A5=20.6 A6=41.2 [deg]
Monochromator: DM=3.354 [Angs] RMH=0 [m] RMV=1.019 [m] curved
Analyzer:      DA=3.354 [Angs] RAH=2.61 [m] RAV=0 [m] curved
Sample:        Powder V.lau
[ILL_H142_IN12] Initialize
Source_gen: component VCS (square 0.14 x 0.22)
            focusing distance dist=2.525 area=0.038 x 0.2
            spectra 2.325 to 2.396 AA (14.254 to 15.135 meV)
            T1=216.8 K (2.093 AA), T2=33.9 K (5.292 AA), T3=16.7 K (7.539 AA)
  Flux is dPhi/dlambda in [n/s/cm2].
Monitor_nD: GuideOut_dxdy is requesting automatic limits option 'auto' together with OpenACC.
WARNING     this feature is NOT supported using OpenACC and has been disabled!
Opening input file '/u/data/pkwi/McStas/mcstas/3.x-dev/data/HOPG.rfl' (Table_Read_Offset)
Isotropic_Sqw: Sample: is a hollow cylinder: radius=0.010000 thickness=0.005000 height=0.050000 [J Comp Phys 228 (2009) 5251]
Opening input file '/u/data/pkwi/McStas/mcstas/3.x-dev/data/V.lau' (Table_Read_Offset)
Opening input file '/u/data/pkwi/McStas/mcstas/3.x-dev/data/V.lau' (Table_Read_Offset)
Isotropic_sqw: Sample: Powder file probably of type Crystallographica/Fullprof (lau)
WARNING:       but F2 unit is set to powder_barns=1 (barns). Intensity might be 100 times too high.
Isotropic_sqw: Converting 3558 powder lines from V.lau into S(q,w) data
Isotropic_sqw: q range [0:25.0197], creating 423 elements vector
Isotropic_Sqw: Sample: Generated V.lau coherent Sqw
                   q=[0:24.9605 Angs-1] w=[0:0 meV] |S|=0.869429 size=[423x1] sigma=0.01834 [barns]
               Mainly elastic scattering.
Isotropic_Sqw: Sample: Using Isotropic elastic incoherent scattering (sigma=5.07999 [barns])
Isotropic_Sqw: Sample: Sample temperature not defined (T=0).
Warning        Disabling detailed balance.
Reusing input file 'HOPG.rfl' (Table_Read_Offset)
*** TRACE end *** 

Save [ILL_H142_IN12]
Detector: GuideOut_xy_I=2.94428e+06 GuideOut_xy_ERR=25276.6 GuideOut_xy_N=277128 "GuideOut_xy_1733500014.x_y"
Detector: GuideOut_dxdy_I=2.94428e+06 GuideOut_dxdy_ERR=25276.6 GuideOut_dxdy_N=277128 "GuideOut_dxdy_1733500014.hd_vd"
Detector: GuideOut_Phic_I=3.86739e+06 GuideOut_Phic_ERR=33207.3 GuideOut_Phic_N=277128 "GuideOut_Phic.dat"
Detector: GuideOut_L_I=2.94428e+06 GuideOut_L_ERR=25276.6 GuideOut_L_N=277128 "GuideOut_L_1733500014.L"
Detector: D4_SC2_1D_I=4.71632e+07 D4_SC2_1D_ERR=193117 D4_SC2_1D_N=893766 "D4_SC2_1D_1733500014.L"
Detector: Sample_Cradle_I=2.26893e+06 Sample_Cradle_ERR=10412.9 Sample_Cradle_N=711400 "Sample_Cradle.dat"
Detector: D7_SC3_1D_I=8.58719e+06 D7_SC3_1D_ERR=37040.9 D7_SC3_1D_N=7.06391e+06 "D7_SC3_1D_1733500014.th_E"
Detector: He3H_I=14.7766 He3H_ERR=0.571508 He3H_N=22823 "He3H.psd"

Finally [ILL_H142_IN12: 1]. Time: 14 [s] 
Isotropic_Sqw: Sample: 78 neutron events (out of 2754831) that should have
               scattered were transmitted because scattering conditions
WARNING        could not be satisfied after 100 tries.
Isotropic_Sqw: Sample: Scattering fraction=0.301116 of incoming intensity
               Absorption fraction           =0.55949
               Single   scattering intensity =82182.1 (coh=223.985 inc=81958.1)
               Multiple scattering intensity =0
INFO: Placing instr file copy ILL_H142_IN12.instr in dataset 1
INFO: Placing generated c-code copy ILL_H142_IN12.c in dataset 1