INFO: Using directory: "1"
INFO: Using existing c-file: ./linup-1.c
INFO: Using existing binary: ./linup-1.out
INFO: ===
Simulation 'TAS1_C1' (linup-1.instr): running on 16 nodes (master is 'elearn1.fysik.dtu.dk', MPI version 3.1).
[TAS1_C1] Initialize
[TAS1_C1] Initialize
[TAS1_C1] Initialize
[TAS1_C1] Initialize
[TAS1_C1] Initialize
[TAS1_C1] Initialize
[TAS1_C1] Initialize
[TAS1_C1] Initialize
[TAS1_C1] Initialize
[TAS1_C1] Initialize
[TAS1_C1] Initialize
[TAS1_C1] Initialize
[TAS1_C1] Initialize
[TAS1_C1] Initialize
[TAS1_C1] Initialize
[TAS1_C1] Initialize
*** TRACE end *** 

Save [TAS1_C1]
<E> : 20.1181 meV , E-width : 0.167291 meV 
<E> : 20.1225 meV , E-width : 0.169172 meV 
<E> : 20.1209 meV , E-width : 0.169867 meV 
<E> : 20.1219 meV , E-width : 0.167098 meV 
Detector: emon1_I=0.000908822 emon1_ERR=1.9512e-06 emon1_N=266202 "linup_1_1.emon"
<E> : 20.1225 meV , E-width : 0.168557 meV 
<E> : 20.121 meV , E-width : 0.167984 meV 
<E> : 20.1202 meV , E-width : 0.169305 meV 
<E> : 20.1216 meV , E-width : 0.167815 meV 
<E> : 20.1213 meV , E-width : 0.16858 meV 
<E> : 20.1241 meV , E-width : 0.168717 meV 
<E> : 20.1196 meV , E-width : 0.169345 meV 
<E> : 20.1219 meV , E-width : 0.16813 meV 
<E> : 20.119 meV , E-width : 0.166715 meV 
<E> : 20.1202 meV , E-width : 0.168441 meV 
<E> : 20.1224 meV , E-width : 0.168056 meV 
<E> : 20.1187 meV , E-width : 0.168149 meV 

Finally [TAS1_C1: 1]. Time: 0 [s] 
Detector: sng_I=0.000422501 sng_ERR=1.32229e-06 sng_N=124739 "sng.dat"

Finally [TAS1_C1: 1]. Time: 0 [s] 

Finally [TAS1_C1: 1]. Time: 0 [s] 

Finally [TAS1_C1: 1]. Time: 0 [s] 

Finally [TAS1_C1: 1]. Time: 0 [s] 

Finally [TAS1_C1: 1]. Time: 0 [s] 

Finally [TAS1_C1: 1]. Time: 0 [s] 

Finally [TAS1_C1: 1]. Time: 0 [s] 

Finally [TAS1_C1: 1]. Time: 0 [s] 

Finally [TAS1_C1: 1]. Time: 0 [s] 

Finally [TAS1_C1: 1]. Time: 0 [s] 

Finally [TAS1_C1: 1]. Time: 0 [s] 

Finally [TAS1_C1: 1]. Time: 0 [s] 

Finally [TAS1_C1: 1]. Time: 0 [s] 

Finally [TAS1_C1: 1]. Time: 0 [s] 

Finally [TAS1_C1: 1]. Time: 0 [s] 
INFO: Placing instr file copy linup-1.instr in dataset 1
INFO: Placing generated c-code copy linup-1.c in dataset 1