INFO: Using directory: "1"
INFO: Using existing c-file: ./HZB_FLEX.c
INFO: Using existing binary: ./HZB_FLEX.out
INFO: ===
Simulation 'HZB_FLEX' (HZB_FLEX.instr): running on 16 nodes (master is 'elearn1.fysik.dtu.dk', MPI version 3.1).
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
[HZB_FLEX] Initialize
[HZB_FLEX] Initialize
[HZB_FLEX] Initialize
[HZB_FLEX] Initialize
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
[HZB_FLEX] Initialize
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
[HZB_FLEX] Initialize
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
[HZB_FLEX] Initialize
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
[HZB_FLEX] Initialize
[HZB_FLEX] Initialize
[HZB_FLEX] Initialize
[HZB_FLEX] Initialize
[HZB_FLEX] Initialize
[HZB_FLEX] Initialize
           Width at the guide exit (w2): 0.030412 
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
[HZB_FLEX] Initialize
[HZB_FLEX] Initialize
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
[HZB_FLEX] Initialize
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
*** TRACE end *** 

Save [HZB_FLEX]
Detector: Before_selec_I=2.97084e+07 Before_selec_ERR=43828.4 Before_selec_N=828320 "PSD_monitor_before.dat"
Detector: After_selec_I=2.03447e+07 After_selec_ERR=36282.9 After_selec_N=483591 "PSD_monitor_after.dat"
<E> : 4.98427 meV , E-width : 0.134704 meV 
<E> : 4.98552 meV , E-width : 0.135556 meV 
<E> : 4.98491 meV , E-width : 0.135802 meV 
<E> : 4.98171 meV , E-width : 0.134852 meV 
<E> : 4.98362 meV , E-width : 0.134837 meV 
<E> : 4.98471 meV , E-width : 0.135586 meV 
<E> : 4.98475 meV , E-width : 0.135378 meV 
<E> : 4.9849 meV , E-width : 0.135205 meV 
<E> : 4.98509 meV , E-width : 0.136288 meV 
<E> : 4.98281 meV , E-width : 0.134784 meV 
<E> : 4.98568 meV , E-width : 0.135274 meV 
<E> : 4.98195 meV , E-width : 0.136104 meV 
<E> : 4.98417 meV , E-width : 0.135625 meV 
<E> : 4.98248 meV , E-width : 0.135602 meV 
<E> : 4.98346 meV , E-width : 0.135987 meV 
Detector: energy_endguide_I=1.32373e+07 energy_endguide_ERR=28025.7 energy_endguide_N=328068 "energy-endguide.dat"
<E> : 4.98446 meV , E-width : 0.136185 meV 
<E> : 4.97643 meV , E-width : 0.0822006 meV 
Detector: energy_mono_I=4.28952e+06 energy_mono_ERR=15949.6 energy_mono_N=105535 "energy-mono.dat"
<E> : 4.97799 meV , E-width : 0.0822941 meV 
<E> : 4.97991 meV , E-width : 0.0814151 meV 
<E> : 4.97822 meV , E-width : 0.0838657 meV 
<E> : 4.98159 meV , E-width : 0.0829976 meV 
<E> : 4.97857 meV , E-width : 0.0814394 meV 
<E> : 4.97869 meV , E-width : 0.0830992 meV 
<E> : 4.97945 meV , E-width : 0.0818683 meV 
<E> : 4.98062 meV , E-width : 0.0822909 meV 
<E> : 4.97996 meV , E-width : 0.0829795 meV 
<E> : 4.97925 meV , E-width : 0.082667 meV 
<E> : 4.98039 meV , E-width : 0.0823359 meV 
<E> : 4.9796 meV , E-width : 0.0824427 meV 
<E> : 4.97982 meV , E-width : 0.0811844 meV 
<E> : 4.98237 meV , E-width : 0.0832424 meV 
<E> : 4.9814 meV , E-width : 0.0832586 meV 
<E> : 4.97875 meV , E-width : 0.0695992 meV 
<E> : 4.97801 meV , E-width : 0.0701832 meV 
<E> : 4.97882 meV , E-width : 0.0701878 meV 
<E> : 4.97749 meV , E-width : 0.0694869 meV 
<E> : 4.98087 meV , E-width : 0.0709697 meV 
<E> : 4.97654 meV , E-width : 0.0700352 meV 
Detector: energy_pre_sample_I=3.62217e+06 energy_pre_sample_ERR=14847.1 energy_pre_sample_N=76582 "energy-pre-sample.dat"
<E> : 4.97809 meV , E-width : 0.0699101 meV 
<E> : 4.97762 meV , E-width : 0.070578 meV 
<E> : 4.98006 meV , E-width : 0.0694154 meV 
<E> : 4.97825 meV , E-width : 0.069533 meV 
<E> : 4.97941 meV , E-width : 0.0705036 meV 
<E> : 4.97824 meV , E-width : 0.0702592 meV 
<E> : 4.97916 meV , E-width : 0.0703113 meV 
<E> : 4.97904 meV , E-width : 0.0691735 meV 
<E> : 4.97841 meV , E-width : 0.0705926 meV 
<E> : 4.9818 meV , E-width : 0.0695035 meV 
Detector: div_mono_I=4.03615e+06 div_mono_ERR=15564.5 div_mono_N=90243 "div-sample.dat"
Detector: div_mono_H_I=354449 div_mono_H_ERR=4581.82 div_mono_H_N=8770 "H-div-sample.dat"
Detector: psd_sam_I=4.30434e+06 psd_sam_ERR=15965.4 psd_sam_N=106678 "psd-sam.dat"

Finally [HZB_FLEX: 1]. Time: 2 [s] 

Finally [HZB_FLEX: 1]. Time: 2 [s] 

Finally [HZB_FLEX: 1]. Time: 2 [s] 

Finally [HZB_FLEX: 1]. Time: 2 [s] 

Finally [HZB_FLEX: 1]. Time: 2 [s] 

Finally [HZB_FLEX: 1]. Time: 2 [s] 

Finally [HZB_FLEX: 1]. Time: 2 [s] 

Finally [HZB_FLEX: 1]. Time: 2 [s] 

Finally [HZB_FLEX: 1]. Time: 2 [s] 

Finally [HZB_FLEX: 1]. Time: 2 [s] 

Finally [HZB_FLEX: 1]. Time: 2 [s] 

Finally [HZB_FLEX: 1]. Time: 2 [s] 

Finally [HZB_FLEX: 1]. Time: 2 [s] 

Finally [HZB_FLEX: 1]. Time: 2 [s] 

Finally [HZB_FLEX: 1]. Time: 2 [s] 
Detector: dpsd1_I=4.30434e+06 dpsd1_ERR=15965.4 dpsd1_N=106678 "linpsdsam.dat"

Finally [HZB_FLEX: 1]. Time: 2 [s] 
INFO: Placing instr file copy HZB_FLEX.instr in dataset 1
INFO: Placing generated c-code copy HZB_FLEX.c in dataset 1