INFO: Using directory: "1"
INFO: Using existing c-file: ./ILL_H53_IN14.c
INFO: Using existing binary: ./ILL_H53_IN14.out
INFO: ===
templateTAS: Detailed TAS configuration
* Incoming beam: EI=4.978 [meV] KI=1.55 [Angs-1] Vi=975.915 [m/s]
* Outgoing beam: EF=4.978 [meV] KF=1.55 [Angs-1] Vf=975.915 [m/s]
* Transfer:     EN=0 [meV] QM=1 [Angs-1]
Angles: A1=37.17 A2=74.33 A3=0 A4=-37.64 A5=37.17 A6=74.33 [deg]
Monochromator: DM=3.355 [Angs] RMH=0 [m] RMV=1.966 [m] curved
Analyzer:      DA=3.355 [Angs] RAH=1.534 [m] RAV=0 [m] curved
Sample:        Powder V.lau
ILL_H53_IN14: Incoming wavelength lambda=4.05367 [Angs]
Source_gen: component HCS (square 0.1 x 0.1)
            focusing distance dist=2.155 area=0.06 x 0.12
            spectra 3.993 to 4.114 AA (4.833 to 5.131 meV)
            T1=413.5 K (1.515 AA), T2=145.8 K (2.552 AA), T3=40.1 K (4.865 AA)
  Flux is dPhi/dlambda in [n/s/cm2].
Monitor_nD: Mon_VS_XY: Using capture flux weightening on 64000 bins.
WARNING     Use binned data with caution, and prefer monitor integral value (I,Ierr).
Opening input file '/u/data/pkwi/McStas/mcstas/3.x-dev/data/HOPG.rfl' (Table_Read_Offset)
Isotropic_Sqw: Sample: is a hollow cylinder: radius=0.010000 thickness=0.005000 height=0.050000 [J Comp Phys 228 (2009) 5251]
Opening input file '/u/data/pkwi/McStas/mcstas/3.x-dev/data/V.lau' (Table_Read_Offset)
Opening input file '/u/data/pkwi/McStas/mcstas/3.x-dev/data/V.lau' (Table_Read_Offset)
Isotropic_sqw: Sample: Powder file probably of type Crystallographica/Fullprof (lau)
WARNING:       but F2 unit is set to powder_barns=1 (barns). Intensity might be 100 times too high.
Isotropic_sqw: Converting 3558 powder lines from V.lau into S(q,w) data
Isotropic_sqw: q range [0:25.0197], creating 423 elements vector
Isotropic_Sqw: Sample: Generated V.lau coherent Sqw
                   q=[0:24.9605 Angs-1] w=[0:0 meV] |S|=0.869429 size=[423x1] sigma=0.01834 [barns]
               Mainly elastic scattering.
Isotropic_Sqw: Sample: Using Isotropic elastic incoherent scattering (sigma=5.07999 [barns])
Isotropic_Sqw: Sample: Sample temperature not defined (T=0).
Warning        Disabling detailed balance.
Reusing input file 'HOPG.rfl' (Table_Read_Offset)
*** TRACE end *** 
Detector: Mon_VS_L_I=4.06195e+08 Mon_VS_L_ERR=1.5565e+06 Mon_VS_L_N=147785 "mon_vs_l.dat"
Detector: Mon_VS_XY_I=9.15443e+08 Mon_VS_XY_ERR=3.50732e+06 Mon_VS_XY_N=147785 "mon_vs_xy.dat"
Detector: Mon_VS1_L_I=3.69433e+08 Mon_VS1_L_ERR=1.47602e+06 Mon_VS1_L_N=141935 "Mon_VS1_L_1731898782.L"
Detector: Mon_VS2_L_I=3.46867e+08 Mon_VS2_L_ERR=1.42728e+06 Mon_VS2_L_N=138958 "Mon_VS2_L_1731898782.L"
Detector: D4_SC2_1D_I=3.75624e+09 D4_SC2_1D_ERR=1.23681e+07 D4_SC2_1D_N=222273 "D4_SC2_1D_1731898782.L"
Detector: Sample_Cradle_I=7.6411e+07 Sample_Cradle_ERR=414415 Sample_Cradle_N=78170 "Sample_Cradle.dat"
Detector: D7_SC3_1D_I=6.59065e+08 D7_SC3_1D_ERR=1.61388e+06 D7_SC3_1D_N=1.63628e+06 "D7_SC3_1D_1731898782.th_E"
Detector: He3H_I=491.778 He3H_ERR=17.5262 He3H_N=3232 "He3H.psd"
Isotropic_Sqw: Sample: 247 neutron events (out of 503717) that should have
               scattered were transmitted because scattering conditions
WARNING        could not be satisfied after 100 tries.
Isotropic_Sqw: Sample: Scattering fraction=0.319482 of incoming intensity
               Absorption fraction           =0.688934
               Single   scattering intensity =3.25958e+06 (coh=8783.16 inc=3.25079e+06)
               Multiple scattering intensity =0
INFO: Placing instr file copy ILL_H53_IN14.instr in dataset 1
INFO: Placing generated c-code copy ILL_H53_IN14.c in dataset 1