INFO: Using directory: "1" INFO: Using existing c-file: ./HZB_FLEX.c INFO: Using existing binary: ./HZB_FLEX.out INFO: === Simulation 'HZB_FLEX' (/home/nexmap/pkwi/TESTS/2024-11-18/ANTLR_mpi_x_16_5e6_Linux_5e6/HZB_FLEX/HZB_FLEX.instr): running on 16 nodes (master is 'elearn1.fysik.dtu.dk', MPI version 3.1). monochromator angles are: A1=-37.166, A2=-74.332 [deg] radius of curvature RMH= -3.269 [m] radius of curvature RMV= -2.386 [m] sample angles are: A3= 0.000, A4= 70.000 [deg] analyser angles are: A5=-37.166, A6=-74.332 [deg] radius of curvature RAH= -1.655 [m] radius of curvature RAV= -0.813 [m] velocity selector frequency is 213.618 [Hz] lambda= 4.054 [A] kI= 1.550 [A^-1] EI= 4.978 [meV] Maxwellian source forced to emit only between l_min= 3.958 and l_max= 4.149 [A] in order to save simulation time correspondingly, the energy monitors at sample position are detecting between 4.752 and 5.222 [meV] monochromator angles are: A1=-37.166, A2=-74.332 [deg] radius of curvature RMH= -3.269 [m] radius of curvature RMV= -2.386 [m] sample angles are: A3= 0.000, A4= 70.000 [deg] analyser angles are: A5=-37.166, A6=-74.332 [deg] radius of curvature RAH= -1.655 [m] radius of curvature RAV= -0.813 [m] velocity selector frequency is 213.618 [Hz] lambda= 4.054 [A] kI= 1.550 [A^-1] EI= 4.978 [meV] Maxwellian source forced to emit only between l_min= 3.958 and l_max= 4.149 [A] in order to save simulation time correspondingly, the energy monitors at sample position are detecting between 4.752 and 5.222 [meV] monochromator angles are: A1=-37.166, A2=-74.332 [deg] radius of curvature RMH= -3.269 [m] radius of curvature RMV= -2.386 [m] sample angles are: A3= 0.000, A4= 70.000 [deg] analyser angles are: A5=-37.166, A6=-74.332 [deg] radius of curvature RAH= -1.655 [m] radius of curvature RAV= -0.813 [m] velocity selector frequency is 213.618 [Hz] lambda= 4.054 [A] kI= 1.550 [A^-1] EI= 4.978 [meV] Maxwellian source forced to emit only between l_min= 3.958 and l_max= 4.149 [A] in order to save simulation time correspondingly, the energy monitors at sample position are detecting between 4.752 and 5.222 [meV] monochromator angles are: A1=-37.166, A2=-74.332 [deg] radius of curvature RMH= -3.269 [m] radius of curvature RMV= -2.386 [m] sample angles are: A3= 0.000, A4= 70.000 [deg] analyser angles are: A5=-37.166, A6=-74.332 [deg] radius of curvature RAH= -1.655 [m] radius of curvature RAV= -0.813 [m] velocity selector frequency is 213.618 [Hz] lambda= 4.054 [A] kI= 1.550 [A^-1] EI= 4.978 [meV] Maxwellian source forced to emit only between l_min= 3.958 and l_max= 4.149 [A] in order to save simulation time correspondingly, the energy monitors at sample position are detecting between 4.752 and 5.222 [meV] monochromator angles are: A1=-37.166, A2=-74.332 [deg] radius of curvature RMH= -3.269 [m] radius of curvature RMV= -2.386 [m] sample angles are: A3= 0.000, A4= 70.000 [deg] analyser angles are: A5=-37.166, A6=-74.332 [deg] radius of curvature RAH= -1.655 [m] radius of curvature RAV= -0.813 [m] velocity selector frequency is 213.618 [Hz] lambda= 4.054 [A] kI= 1.550 [A^-1] EI= 4.978 [meV] Maxwellian source forced to emit only between l_min= 3.958 and l_max= 4.149 [A] in order to save simulation time correspondingly, the energy monitors at sample position are detecting between 4.752 and 5.222 [meV] Component: elliptical_piece (Guide_tapering) Height at the guide exit (h2): 0.125000 Component: elliptical_piece (Guide_tapering) Width at the guide exit (w2): 0.030412 monochromator angles are: A1=-37.166, A2=-74.332 [deg] radius of curvature RMH= -3.269 [m] radius of curvature RMV= -2.386 [m] sample angles are: A3= 0.000, A4= 70.000 [deg] analyser angles are: A5=-37.166, A6=-74.332 [deg] radius of curvature RAH= -1.655 [m] radius of curvature RAV= -0.813 [m] velocity selector frequency is 213.618 [Hz] lambda= 4.054 [A] kI= 1.550 [A^-1] EI= 4.978 [meV] Maxwellian source forced to emit only between l_min= 3.958 and l_max= 4.149 [A] in order to save simulation time correspondingly, the energy monitors at sample position are detecting between 4.752 and 5.222 [meV] monochromator angles are: A1=-37.166, A2=-74.332 [deg] radius of curvature RMH= -3.269 [m] radius of curvature RMV= -2.386 [m] sample angles are: A3= 0.000, A4= 70.000 [deg] analyser angles are: A5=-37.166, A6=-74.332 [deg] radius of curvature RAH= -1.655 [m] radius of curvature RAV= -0.813 [m] velocity selector frequency is 213.618 [Hz] lambda= 4.054 [A] kI= 1.550 [A^-1] EI= 4.978 [meV] Maxwellian source forced to emit only between l_min= 3.958 and l_max= 4.149 [A] in order to save simulation time correspondingly, the energy monitors at sample position are detecting between 4.752 and 5.222 [meV] monochromator angles are: A1=-37.166, A2=-74.332 [deg] radius of curvature RMH= -3.269 [m] radius of curvature RMV= -2.386 [m] sample angles are: A3= 0.000, A4= 70.000 [deg] analyser angles are: A5=-37.166, A6=-74.332 [deg] radius of curvature RAH= -1.655 [m] radius of curvature RAV= -0.813 [m] velocity selector frequency is 213.618 [Hz] lambda= 4.054 [A] kI= 1.550 [A^-1] monochromator angles are: A1=-37.166, A2=-74.332 [deg] radius of curvature RMH= -3.269 [m] radius of curvature RMV= -2.386 [m] sample angles are: A3= 0.000, A4= 70.000 [deg] analyser angles are: A5=-37.166, A6=-74.332 [deg] radius of curvature RAH= -1.655 [m] radius of curvature RAV= -0.813 [m] velocity selector frequency is 213.618 [Hz] lambda= 4.054 [A] kI= 1.550 [A^-1] EI= 4.978 [meV] Maxwellian source forced to emit only between l_min= 3.958 and l_max= 4.149 [A] in order to save simulation time correspondingly, the energy monitors at sample position are detecting between 4.752 and 5.222 [meV] monochromator angles are: A1=-37.166, A2=-74.332 [deg] radius of curvature RMH= -3.269 [m] radius of curvature RMV= -2.386 [m] sample angles are: A3= 0.000, A4= 70.000 [deg] analyser angles are: A5=-37.166, A6=-74.332 [deg] radius of curvature RAH= -1.655 [m] radius of curvature RAV= -0.813 [m] velocity selector frequency is 213.618 [Hz] lambda= 4.054 [A] kI= 1.550 [A^-1] EI= 4.978 [meV] Maxwellian source forced to emit only between l_min= 3.958 and l_max= 4.149 [A] in order to save simulation time correspondingly, the energy monitors at sample position are detecting between 4.752 and 5.222 [meV] Component: elliptical_piece (Guide_tapering) Height at the guide exit (h2): 0.125000 Component: elliptical_piece (Guide_tapering) Width at the guide exit (w2): 0.030412 Component: elliptical_piece (Guide_tapering) Height at the guide exit (h2): 0.125000 Component: elliptical_piece (Guide_tapering) Width at the guide exit (w2): 0.030412 Component: elliptical_piece (Guide_tapering) Height at the guide exit (h2): 0.125000 Component: elliptical_piece (Guide_tapering) Width at the guide exit (w2): 0.030412 Component: elliptical_piece (Guide_tapering) Height at the guide exit (h2): 0.125000 Component: elliptical_piece (Guide_tapering) Width at the guide exit (w2): 0.030412 Component: elliptical_piece (Guide_tapering) Height at the guide exit (h2): 0.125000 Component: elliptical_piece (Guide_tapering) Width at the guide exit (w2): 0.030412 Component: elliptical_piece (Guide_tapering) Height at the guide exit (h2): 0.125000 Component: elliptical_piece (Guide_tapering) Width at the guide exit (w2): 0.030412 monochromator angles are: A1=-37.166, A2=-74.332 [deg] radius of curvature RMH= -3.269 [m] radius of curvature RMV= -2.386 [m] sample angles are: A3= 0.000, A4= 70.000 [deg] analyser angles are: A5=-37.166, A6=-74.332 [deg] radius of curvature RAH= -1.655 [m] radius of curvature RAV= -0.813 [m] velocity selector frequency is 213.618 [Hz] lambda= 4.054 [A] kI= 1.550 [A^-1] EI= 4.978 [meV] Maxwellian source forced to emit only between l_min= 3.958 and l_max= 4.149 [A] in order to save simulation time correspondingly, the energy monitors at sample position are detecting between 4.752 and 5.222 [meV] monochromator angles are: A1=-37.166, A2=-74.332 [deg] radius of curvature RMH= -3.269 [m] radius of curvature RMV= -2.386 [m] sample angles are: A3= 0.000, A4= 70.000 [deg] analyser angles are: A5=-37.166, A6=-74.332 [deg] radius of curvature RAH= -1.655 [m] radius of curvature RAV= -0.813 [m] velocity selector frequency is 213.618 [Hz] lambda= 4.054 [A] kI= 1.550 [A^-1] EI= 4.978 [meV] Maxwellian source forced to emit only between l_min= 3.958 and l_max= 4.149 [A] in order to save simulation time correspondingly, the energy monitors at sample position are detecting between 4.752 and 5.222 [meV] Component: elliptical_piece (Guide_tapering) Height at the guide exit (h2): 0.125000 Component: elliptical_piece (Guide_tapering) Width at the guide exit (w2): 0.030412 Component: elliptical_piece (Guide_tapering) Height at the guide exit (h2): 0.125000 Component: elliptical_piece (Guide_tapering) Width at the guide exit (w2): 0.030412 Component: elliptical_piece (Guide_tapering) Height at the guide exit (h2): 0.125000 Component: elliptical_piece (Guide_tapering) Width at the guide exit (w2): 0.030412 Component: elliptical_piece (Guide_tapering) Height at the guide exit (h2): 0.125000 Component: elliptical_piece (Guide_tapering) Width at the guide exit (w2): 0.030412 Component: elliptical_piece (Guide_tapering) Height at the guide exit (h2): 0.125000 Component: elliptical_piece (Guide_tapering) Width at the guide exit (w2): 0.030412 Component: elliptical_piece (Guide_tapering) Height at the guide exit (h2): 0.125000 Component: elliptical_piece (Guide_tapering) Width at the guide exit (w2): 0.030412 [HZB_FLEX] Initialize EI= 4.978 [meV] Maxwellian source forced to emit only between l_min= 3.958 and l_max= 4.149 [A] in order to save simulation time correspondingly, the energy monitors at sample position are detecting between 4.752 and 5.222 [meV] [HZB_FLEX] Initialize [HZB_FLEX] Initialize [HZB_FLEX] Initialize [HZB_FLEX] Initialize monochromator angles are: A1=-37.166, A2=-74.332 [deg] radius of curvature RMH= -3.269 [m] radius of curvature RMV= -2.386 [m] sample angles are: A3= 0.000, A4= 70.000 [deg] analyser angles are: A5=-37.166, A6=-74.332 [deg] [HZB_FLEX] Initialize [HZB_FLEX] Initialize [HZB_FLEX] Initialize [HZB_FLEX] Initialize [HZB_FLEX] Initialize radius of curvature RAH= -1.655 [m] radius of curvature RAV= -0.813 [m] velocity selector frequency is 213.618 [Hz] lambda= 4.054 [A] kI= 1.550 [A^-1] EI= 4.978 [meV] Maxwellian source forced to emit only between l_min= 3.958 and l_max= 4.149 [A] in order to save simulation time correspondingly, the energy monitors at sample position are detecting between 4.752 and 5.222 [meV] Component: elliptical_piece (Guide_tapering) Height at the guide exit (h2): 0.125000 Component: elliptical_piece (Guide_tapering) Width at the guide exit (w2): 0.030412 Component: elliptical_piece (Guide_tapering) Height at the guide exit (h2): 0.125000 Component: elliptical_piece (Guide_tapering) Width at the guide exit (w2): 0.030412 Component: elliptical_piece (Guide_tapering) Height at the guide exit (h2): 0.125000 Component: elliptical_piece (Guide_tapering) Width at the guide exit (w2): 0.030412 [HZB_FLEX] Initialize [HZB_FLEX] Initialize monochromator angles are: A1=-37.166, A2=-74.332 [deg] radius of curvature RMH= -3.269 [m] radius of curvature RMV= -2.386 [m] sample angles are: A3= 0.000, A4= 70.000 [deg] analyser angles are: A5=-37.166, A6=-74.332 [deg] radius of curvature RAH= -1.655 [m] radius of curvature RAV= -0.813 [m] velocity selector frequency is 213.618 [Hz] lambda= 4.054 [A] kI= 1.550 [A^-1] EI= 4.978 [meV] Maxwellian source forced to emit only between l_min= 3.958 and l_max= 4.149 [A] in order to save simulation time correspondingly, the energy monitors at sample position are detecting between 4.752 and 5.222 [meV] [HZB_FLEX] Initialize monochromator angles are: A1=-37.166, A2=-74.332 [deg] radius of curvature RMH= -3.269 [m] radius of curvature RMV= -2.386 [m] sample angles are: A3= 0.000, A4= 70.000 [deg] analyser angles are: A5=-37.166, A6=-74.332 [deg] radius of curvature RAH= -1.655 [m] radius of curvature RAV= -0.813 [m] velocity selector frequency is 213.618 [Hz] lambda= 4.054 [A] kI= 1.550 [A^-1] EI= 4.978 [meV] Maxwellian source forced to emit only between l_min= 3.958 and l_max= 4.149 [A] in order to save simulation time correspondingly, the energy monitors at sample position are detecting between 4.752 and 5.222 [meV] [HZB_FLEX] Initialize monochromator angles are: A1=-37.166, A2=-74.332 [deg] radius of curvature RMH= -3.269 [m] radius of curvature RMV= -2.386 [m] sample angles are: A3= 0.000, A4= 70.000 [deg] analyser angles are: A5=-37.166, A6=-74.332 [deg] radius of curvature RAH= -1.655 [m] radius of curvature RAV= -0.813 [m] velocity selector frequency is 213.618 [Hz] lambda= 4.054 [A] kI= 1.550 [A^-1] EI= 4.978 [meV] Maxwellian source forced to emit only between l_min= 3.958 and l_max= 4.149 [A] in order to save simulation time correspondingly, the energy monitors at sample position are detecting between 4.752 and 5.222 [meV] [HZB_FLEX] Initialize [HZB_FLEX] Initialize *** TRACE end *** Save [HZB_FLEX] Detector: Before_selec_I=2.97201e+07 Before_selec_ERR=62001.8 Before_selec_N=414589 "PSD_monitor_before.dat" Detector: After_selec_I=2.03521e+07 After_selec_ERR=51328.5 After_selec_N=241922 "PSD_monitor_after.dat" : 4.9842 meV , E-width : 0.134279 meV : 4.98315 meV , E-width : 0.134172 meV : 4.98656 meV , E-width : 0.13563 meV : 4.98402 meV , E-width : 0.135033 meV : 4.98611 meV , E-width : 0.135378 meV : 4.981 meV , E-width : 0.135514 meV : 4.98412 meV , E-width : 0.135624 meV : 4.98187 meV , E-width : 0.135741 meV : 4.98196 meV , E-width : 0.134748 meV : 4.98424 meV , E-width : 0.136436 meV Detector: energy_endguide_I=1.32667e+07 energy_endguide_ERR=39681.9 energy_endguide_N=164389 "energy-endguide.dat" : 4.98453 meV , E-width : 0.135106 meV : 4.98497 meV , E-width : 0.135871 meV : 4.98518 meV , E-width : 0.135773 meV : 4.98077 meV , E-width : 0.135571 meV : 4.98113 meV , E-width : 0.135454 meV : 4.98645 meV , E-width : 0.136713 meV : 4.97914 meV , E-width : 0.0827905 meV : 4.97909 meV , E-width : 0.0816144 meV : 4.98012 meV , E-width : 0.0824067 meV : 4.98149 meV , E-width : 0.0829425 meV : 4.98072 meV , E-width : 0.0814103 meV : 4.97926 meV , E-width : 0.0829225 meV : 4.97879 meV , E-width : 0.0826649 meV : 4.9809 meV , E-width : 0.0810589 meV Detector: energy_mono_I=4.30907e+06 energy_mono_ERR=22613 energy_mono_N=52933 "energy-mono.dat" : 4.97832 meV , E-width : 0.0835434 meV : 4.9808 meV , E-width : 0.0829301 meV : 4.97936 meV , E-width : 0.0841132 meV : 4.97687 meV , E-width : 0.0825628 meV : 4.97889 meV , E-width : 0.0808453 meV : 4.97883 meV , E-width : 0.0840343 meV : 4.98145 meV , E-width : 0.0816457 meV : 4.98314 meV , E-width : 0.0839694 meV : 4.97947 meV , E-width : 0.0703955 meV Detector: energy_pre_sample_I=3.64457e+06 energy_pre_sample_ERR=21067.5 energy_pre_sample_N=38461 "energy-pre-sample.dat" : 4.97666 meV , E-width : 0.0693038 meV : 4.97929 meV , E-width : 0.0701596 meV : 4.97746 meV , E-width : 0.0707692 meV : 4.97601 meV , E-width : 0.0710221 meV : 4.978 meV , E-width : 0.0700939 meV : 4.97853 meV , E-width : 0.0710366 meV : 4.98101 meV , E-width : 0.0709589 meV : 4.97671 meV , E-width : 0.0698602 meV : 4.97912 meV , E-width : 0.0697127 meV : 4.97924 meV , E-width : 0.0688069 meV : 4.9802 meV , E-width : 0.0689488 meV : 4.97891 meV , E-width : 0.0699751 meV : 4.97791 meV , E-width : 0.0695617 meV : 4.97961 meV , E-width : 0.0696931 meV : 4.98156 meV , E-width : 0.0701747 meV Detector: div_mono_I=4.05065e+06 div_mono_ERR=22062.5 div_mono_N=45151 "div-sample.dat" Detector: div_mono_H_I=357541 div_mono_H_ERR=6513.13 div_mono_H_N=4415 "H-div-sample.dat" Detector: psd_sam_I=4.32361e+06 psd_sam_ERR=22634.1 psd_sam_N=53509 "psd-sam.dat" Finally [HZB_FLEX: 1]. Time: 1 [s] Finally [HZB_FLEX: 1]. Time: 1 [s] Finally [HZB_FLEX: 1]. Time: 1 [s] Finally [HZB_FLEX: 1]. Time: 1 [s] Finally [HZB_FLEX: 1]. Time: 1 [s] Finally [HZB_FLEX: 1]. Time: 1 [s] Finally [HZB_FLEX: 1]. Time: 1 [s] Finally [HZB_FLEX: 1]. Time: 1 [s] Finally [HZB_FLEX: 1]. Time: 1 [s] Finally [HZB_FLEX: 1]. Time: 1 [s] Finally [HZB_FLEX: 1]. Time: 1 [s] Finally [HZB_FLEX: 1]. Time: 1 [s] Finally [HZB_FLEX: 1]. Time: 1 [s] Finally [HZB_FLEX: 1]. Time: 1 [s] Finally [HZB_FLEX: 1]. Time: 1 [s] Detector: dpsd1_I=4.32361e+06 dpsd1_ERR=22634.1 dpsd1_N=53509 "linpsdsam.dat" Finally [HZB_FLEX: 1]. Time: 1 [s] INFO: Placing instr file copy HZB_FLEX.instr in dataset 1 INFO: Placing generated c-code copy HZB_FLEX.c in dataset 1