INFO: Using directory: "1"
INFO: Using existing c-file: ./HZB_FLEX.c
INFO: Using existing binary: ./HZB_FLEX.out
INFO: ===
Simulation 'HZB_FLEX' (/home/nexmap/pkwi/TESTS/2024-11-18/ANTLR_mpi_x_16_1e7_Linux_1e7/HZB_FLEX/HZB_FLEX.instr): running on 16 nodes (master is 'elearn1.fysik.dtu.dk', MPI version 3.1).
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
[HZB_FLEX] Initialize
[HZB_FLEX] Initialize
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
[HZB_FLEX] Initialize
[HZB_FLEX] Initialize
[HZB_FLEX] Initialize
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
[HZB_FLEX] Initialize
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
[HZB_FLEX] Initialize
[HZB_FLEX] Initialize
[HZB_FLEX] Initialize
[HZB_FLEX] Initialize
[HZB_FLEX] Initialize
[HZB_FLEX] Initialize
[HZB_FLEX] Initialize
[HZB_FLEX] Initialize
[HZB_FLEX] Initialize
[HZB_FLEX] Initialize
*** TRACE end *** 

Save [HZB_FLEX]
Detector: Before_selec_I=2.97326e+07 Before_selec_ERR=43849.4 Before_selec_N=829974 "PSD_monitor_before.dat"
Detector: After_selec_I=2.03585e+07 After_selec_ERR=36297 After_selec_N=484563 "PSD_monitor_after.dat"
<E> : 4.98493 meV , E-width : 0.135809 meV 
<E> : 4.9835 meV , E-width : 0.135976 meV 
<E> : 4.98196 meV , E-width : 0.136109 meV 
<E> : 4.98284 meV , E-width : 0.134786 meV 
<E> : 4.98166 meV , E-width : 0.134866 meV 
<E> : 4.98567 meV , E-width : 0.135249 meV 
<E> : 4.98412 meV , E-width : 0.135596 meV 
<E> : 4.98471 meV , E-width : 0.135579 meV 
<E> : 4.98555 meV , E-width : 0.135575 meV 
<E> : 4.98371 meV , E-width : 0.134861 meV 
<E> : 4.9847 meV , E-width : 0.135391 meV 
<E> : 4.98421 meV , E-width : 0.134688 meV 
<E> : 4.98492 meV , E-width : 0.135187 meV 
<E> : 4.98505 meV , E-width : 0.136291 meV 
<E> : 4.98249 meV , E-width : 0.135619 meV 
Detector: energy_endguide_I=1.32462e+07 energy_endguide_ERR=28035.2 energy_endguide_N=328937 "energy-endguide.dat"
<E> : 4.98446 meV , E-width : 0.136208 meV 
<E> : 4.97641 meV , E-width : 0.0822107 meV 
<E> : 4.97866 meV , E-width : 0.0830256 meV 
<E> : 4.97804 meV , E-width : 0.0838687 meV 
<E> : 4.9798 meV , E-width : 0.0814737 meV 
<E> : 4.97995 meV , E-width : 0.0811648 meV 
<E> : 4.97928 meV , E-width : 0.0818664 meV 
<E> : 4.98239 meV , E-width : 0.0832392 meV 
<E> : 4.97809 meV , E-width : 0.0823473 meV 
<E> : 4.97988 meV , E-width : 0.0829592 meV 
<E> : 4.97841 meV , E-width : 0.0815458 meV 
<E> : 4.98064 meV , E-width : 0.0823109 meV 
<E> : 4.97924 meV , E-width : 0.0826893 meV 
<E> : 4.98143 meV , E-width : 0.0828913 meV 
<E> : 4.98039 meV , E-width : 0.0823691 meV 
<E> : 4.97952 meV , E-width : 0.0825208 meV 
Detector: energy_mono_I=4.29173e+06 energy_mono_ERR=15953.9 energy_mono_N=105774 "energy-mono.dat"
<E> : 4.98134 meV , E-width : 0.0833152 meV 
<E> : 4.98084 meV , E-width : 0.0709577 meV 
<E> : 4.97759 meV , E-width : 0.0695241 meV 
<E> : 4.97898 meV , E-width : 0.0691915 meV 
<E> : 4.97812 meV , E-width : 0.0695908 meV 
<E> : 4.97922 meV , E-width : 0.0703426 meV 
<E> : 4.97834 meV , E-width : 0.0705593 meV 
<E> : 4.98004 meV , E-width : 0.0694563 meV 
<E> : 4.97877 meV , E-width : 0.0696374 meV 
Detector: energy_pre_sample_I=3.62393e+06 energy_pre_sample_ERR=14851.4 energy_pre_sample_N=76593 "energy-pre-sample.dat"
<E> : 4.97795 meV , E-width : 0.07025 meV 
<E> : 4.97645 meV , E-width : 0.0699977 meV 
<E> : 4.97949 meV , E-width : 0.0705788 meV 
<E> : 4.97736 meV , E-width : 0.0706922 meV 
<E> : 4.97803 meV , E-width : 0.0698962 meV 
<E> : 4.97889 meV , E-width : 0.0702192 meV 
<E> : 4.97814 meV , E-width : 0.0703618 meV 
<E> : 4.98169 meV , E-width : 0.0695669 meV 
Detector: div_mono_I=4.03867e+06 div_mono_ERR=15570.1 div_mono_N=90294 "div-sample.dat"
Detector: div_mono_H_I=354890 div_mono_H_ERR=4584.92 div_mono_H_N=8794 "H-div-sample.dat"
Detector: psd_sam_I=4.3066e+06 psd_sam_ERR=15969.7 psd_sam_N=106940 "psd-sam.dat"

Finally [HZB_FLEX: 1]. Time: 1 [s] 

Finally [HZB_FLEX: 1]. Time: 1 [s] 

Finally [HZB_FLEX: 1]. Time: 1 [s] 

Finally [HZB_FLEX: 1]. Time: 1 [s] 

Finally [HZB_FLEX: 1]. Time: 1 [s] 

Finally [HZB_FLEX: 1]. Time: 1 [s] 

Finally [HZB_FLEX: 1]. Time: 1 [s] 

Finally [HZB_FLEX: 1]. Time: 1 [s] 

Finally [HZB_FLEX: 1]. Time: 1 [s] 

Finally [HZB_FLEX: 1]. Time: 1 [s] 

Finally [HZB_FLEX: 1]. Time: 1 [s] 

Finally [HZB_FLEX: 1]. Time: 1 [s] 

Finally [HZB_FLEX: 1]. Time: 1 [s] 
Detector: dpsd1_I=4.3066e+06 dpsd1_ERR=15969.7 dpsd1_N=106940 "linpsdsam.dat"

Finally [HZB_FLEX: 1]. Time: 1 [s] 

Finally [HZB_FLEX: 1]. Time: 1 [s] 

Finally [HZB_FLEX: 1]. Time: 1 [s] 
INFO: Placing instr file copy HZB_FLEX.instr in dataset 1
INFO: Placing generated c-code copy HZB_FLEX.c in dataset 1