INFO: Using directory: "1"
INFO: Using existing c-file: ./HZB_FLEX.c
INFO: Using existing binary: ./HZB_FLEX.out
INFO: ===
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
[HZB_FLEX] Initialize
*** TRACE end *** 

Save [HZB_FLEX]
Detector: Before_selec_I=2.96753e+07 Before_selec_ERR=61977.4 Before_selec_N=413910 "PSD_monitor_before.dat"
Detector: After_selec_I=2.03266e+07 After_selec_ERR=51306 After_selec_N=241823 "PSD_monitor_after.dat"
Detector: energy_endguide_I=1.32166e+07 energy_endguide_ERR=39640.2 energy_endguide_N=163844 "energy-endguide.dat"
<E> : 4.97899 meV , E-width : 0.179663 meV 
Detector: energy_mono_I=4.28968e+06 energy_mono_ERR=22577.5 energy_mono_N=52928 "energy-mono.dat"
<E> : 4.97668 meV , E-width : 0.126984 meV 
Detector: energy_pre_sample_I=3.62329e+06 energy_pre_sample_ERR=21029.5 energy_pre_sample_N=38226 "energy-pre-sample.dat"
<E> : 4.97676 meV , E-width : 0.0735493 meV 
Detector: div_mono_I=4.02871e+06 div_mono_ERR=22011.1 div_mono_N=45145 "div-sample.dat"
Detector: div_mono_H_I=351576 div_mono_H_ERR=6475.29 div_mono_H_N=4391 "H-div-sample.dat"
Detector: psd_sam_I=4.30469e+06 psd_sam_ERR=22600.6 psd_sam_N=53511 "psd-sam.dat"
Detector: dpsd1_I=4.30469e+06 dpsd1_ERR=22600.6 dpsd1_N=53511 "linpsdsam.dat"

Finally [HZB_FLEX: 1]. Time: 4 [s] 
INFO: Placing instr file copy HZB_FLEX.instr in dataset 1
INFO: Placing generated c-code copy HZB_FLEX.c in dataset 1