loading system configuration
loading override configuration from /users/willend/McCode/tools/Python/mctest/../mccodelib/mcstas-test/McStas_DUAL_A100_DMSC/mccode_config.json
INFO: Using directory: "3"
INFO: Using existing c-file: ./Test_Fermi.c
INFO: Using existing binary: ./Test_Fermi.out
INFO: ===
--------------------------------------------------------------------------
WARNING: No preset parameters were found for the device that Open MPI
detected:

  Local host:            r6n22
  Device name:           mlx5_0
  Device vendor ID:      0x02c9
  Device vendor part ID: 4123

Default device parameters will be used, which may result in lower
performance.  You can edit any of the files specified by the
btl_openib_device_param_files MCA parameter to set values for your
device.

NOTE: You can turn off this warning by setting the MCA parameter
      btl_openib_warn_no_device_params_found to 0.
--------------------------------------------------------------------------
Simulation 'Test_Fermi' (/users/willend/TESTS/2023-03-01/McStas_DUAL_A100_DMSC_5e7/Test_Fermi/Test_Fermi.instr): running on 2 nodes (master is 'r6n22.esss.dk', MPI version 3.1).
Have found 2 GPU devices on rank 1. Will use device 1.
Have found 2 GPU devices on rank 0. Will use device 0.

Test_Fermi: Using rotating Guide_gravity

Theor: Lambda=8.01596 [Angs]
Theor: Time from source  t=0.00257078 [s]
Theor: Time to detection t=0.00257078 [s]
       Time period      dt=0.01 [s]
       Slit pack div       3.50032 [deg] (full width)
       Time window width  =9.72311e-05 [s] (pulse width)
       Phase           phi=92.548 [deg]

Test_Fermi: Using rotating Guide_gravity

Theor: Lambda=8.01596 [Angs]
Theor: Time from source  t=0.00257078 [s]
Theor: Time to detection t=0.00257078 [s]
       Time period      dt=0.01 [s]
       Slit pack div       3.50032 [deg] (full width)
       Time window width  =9.72311e-05 [s] (pulse width)
       Phase           phi=92.548 [deg]
[Test_Fermi] Initialize
Guide_gravity: FC_GuideG: Fermi Chopper mode: frequency=100 [Hz] phase=271.92 [deg]
Guide_channeled: FC_GuideC: Fermi Chopper mode: frequency=100 [Hz] phase=271.92 [deg]
[Test_Fermi] Initialize
FermiChopper: FC_McStas: Frequency nu=100 [Hz] 6000 [rpm], time frame=0.02 [s] phase=271.92 [deg]
Guide_gravity: FC_GuideG: Fermi Chopper mode: frequency=100 [Hz] phase=271.92 [deg]
Guide_channeled: FC_GuideC: Fermi Chopper mode: frequency=100 [Hz] phase=271.92 [deg]
FermiChopper: FC_McStas: Frequency nu=100 [Hz] 6000 [rpm], time frame=0.02 [s] phase=271.92 [deg]
*** TRACE end *** 

Save [Test_Fermi]
Detector: Monitor1_xt_I=0.0056561 Monitor1_xt_ERR=7.99893e-07 Monitor1_xt_N=5e+07 "Monitor1_xt_1677634467.x"
Detector: Monitor1_xt_I=0.0056561 Monitor1_xt_ERR=7.99893e-07 Monitor1_xt_N=5e+07 "Monitor1_xt_1677634467.y"
Detector: Monitor1_xt_I=0.00565591 Monitor1_xt_ERR=7.9988e-07 Monitor1_xt_N=4.99984e+07 "Monitor1_xt_1677634467.t"
FermiChopper: FC_McStas: No neutron can reach the chopper.
FermiChopper: FC_McStas: No neutron can reach the chopper.
Detector: Monitor2_xt_I=0.000587364 Monitor2_xt_ERR=2.57767e-07 Monitor2_xt_N=5.19231e+06 "Monitor2_xt_1677634467.x"
Detector: Monitor2_xt_I=0.000587364 Monitor2_xt_ERR=2.57767e-07 Monitor2_xt_N=5.19231e+06 "Monitor2_xt_1677634467.y"

Finally [Test_Fermi: 3]. Time: 1 [s] 
Detector: Monitor2_xt_I=0.000587227 Monitor2_xt_ERR=2.57737e-07 Monitor2_xt_N=5.1911e+06 "Monitor2_xt_1677634467.t"

Finally [Test_Fermi: 3]. Time: 1 [s] 
[r6n22.esss.dk:1577218] 1 more process has sent help message help-mpi-btl-openib.txt / no device params found
[r6n22.esss.dk:1577218] Set MCA parameter "orte_base_help_aggregate" to 0 to see all help / error messages
INFO: Placing instr file copy /users/willend/TESTS/2023-03-01/McStas_DUAL_A100_DMSC_5e7/Test_Fermi/Test_Fermi.instr in dataset 3