loading system configuration
loading override configuration from /users/willend/McCode/tools/Python/mctest/../mccodelib/mcstas-test/McStas_DUAL_A100_DMSC/mccode_config.json
INFO: Using directory: "1"
INFO: Using existing c-file: ./Test_Fermi.c
INFO: Using existing binary: ./Test_Fermi.out
INFO: ===
--------------------------------------------------------------------------
WARNING: No preset parameters were found for the device that Open MPI
detected:

  Local host:            r6n22
  Device name:           mlx5_0
  Device vendor ID:      0x02c9
  Device vendor part ID: 4123

Default device parameters will be used, which may result in lower
performance.  You can edit any of the files specified by the
btl_openib_device_param_files MCA parameter to set values for your
device.

NOTE: You can turn off this warning by setting the MCA parameter
      btl_openib_warn_no_device_params_found to 0.
--------------------------------------------------------------------------
Simulation 'Test_Fermi' (/users/willend/TESTS/2023-03-01/McStas_DUAL_A100_DMSC_5e7/Test_Fermi/Test_Fermi.instr): running on 2 nodes (master is 'r6n22.esss.dk', MPI version 3.1).
Have found 2 GPU devices on rank 0. Will use device 0.
Have found 2 GPU devices on rank 1. Will use device 1.

Test_Fermi: Using FermiChopper

Theor: Lambda=8.01596 [Angs]
Theor: Time from source  t=0.00257078 [s]
Theor: Time to detection t=0.00257078 [s]
       Time period      dt=0.01 [s]
       Slit pack div       3.50032 [deg] (full width)
       Time window width  =9.72311e-05 [s] (pulse width)
       Phase           phi=92.548 [deg]

Test_Fermi: Using FermiChopper

Theor: Lambda=8.01596 [Angs]
Theor: Time from source  t=0.00257078 [s]
Theor: Time to detection t=0.00257078 [s]
       Time period      dt=0.01 [s]
       Slit pack div       3.50032 [deg] (full width)
       Time window width  =9.72311e-05 [s] (pulse width)
       Phase           phi=92.548 [deg]
[Test_Fermi] Initialize
Guide_gravity: FC_GuideG: Fermi Chopper mode: frequency=100 [Hz] phase=271.92 [deg]
Guide_channeled: FC_GuideC: Fermi Chopper mode: frequency=100 [Hz] phase=271.92 [deg]
FermiChopper: FC_McStas: Frequency nu=100 [Hz] 6000 [rpm], time frame=0.02 [s] phase=271.92 [deg]
[Test_Fermi] Initialize
Guide_gravity: FC_GuideG: Fermi Chopper mode: frequency=100 [Hz] phase=271.92 [deg]
Guide_channeled: FC_GuideC: Fermi Chopper mode: frequency=100 [Hz] phase=271.92 [deg]
FermiChopper: FC_McStas: Frequency nu=100 [Hz] 6000 [rpm], time frame=0.02 [s] phase=271.92 [deg]
*** TRACE end *** 

Save [Test_Fermi]
Detector: Monitor1_xt_I=0.0056561 Monitor1_xt_ERR=7.99893e-07 Monitor1_xt_N=5e+07 "Monitor1_xt_1677634462.x"
Detector: Monitor1_xt_I=0.0056561 Monitor1_xt_ERR=7.99893e-07 Monitor1_xt_N=5e+07 "Monitor1_xt_1677634462.y"
FermiChopper: FC_McStas
              Mean velocity     v     = 1169.96 [m/s]
              Mean wavelength   lambda= 3.38135 [Angs]
              Mean energy       omega = 7.15478 [meV]
Detector: Monitor1_xt_I=0.00565591 Monitor1_xt_ERR=7.9988e-07 Monitor1_xt_N=4.99984e+07 "Monitor1_xt_1677634462.t"
              Mean arrival time t     = 0.00248592 [s]
              Mean phase              = 92.5701 [deg] (use phase=-(this value) to optimize)
              Slit pack divergence    = 3.50032 [deg] (full width)
              Opening time      dt    = 0.00557093 [s]
              Intensity reaching FC   = 0.00282805 [n/s]
              Intensity passing  FC   = 0.000240852 [n/s]
FermiChopper: FC_McStas: Lost events anaylsis
              Already inside:            0
              By Top/Bottom of cylinder: 0
              At cylinder entrance:      4241006
              Hit cyl. entrance sides:   0
              Can't prop. to slit pack:  0
              At slit pack entrance:     15972
              On absorbing slit coating: 18442418
              Exiting slit pack:         0
              Too many iterations:       0
              Prop. in wrong direction : 0
              Mad neutron (no control):  0
              At cylinder exit:          59420
FermiChopper: FC_McStas
              Mean velocity     v     = 1169.96 [m/s]
              Mean wavelength   lambda= 3.38135 [Angs]
              Mean energy       omega = 7.15475 [meV]
              Mean arrival time t     = 0.00248593 [s]
              Mean phase              = 92.5706 [deg] (use phase=-(this value) to optimize)
              Slit pack divergence    = 3.50032 [deg] (full width)
              Opening time      dt    = 0.00557093 [s]
              Intensity reaching FC   = 0.00282805 [n/s]
              Intensity passing  FC   = 0.000240689 [n/s]
FermiChopper: FC_McStas: Lost events anaylsis
              Already inside:            0
              By Top/Bottom of cylinder: 0
              At cylinder entrance:      4241520
              Hit cyl. entrance sides:   0
              Can't prop. to slit pack:  0
              At slit pack entrance:     15855
              On absorbing slit coating: 18443851
              Exiting slit pack:         0
              Too many iterations:       0
              Prop. in wrong direction : 0
              Mad neutron (no control):  0
              At cylinder exit:          59107
Detector: Monitor2_xt_I=0.000481542 Monitor2_xt_ERR=2.27486e-07 Monitor2_xt_N=4.48085e+06 "Monitor2_xt_1677634462.x"
Detector: Monitor2_xt_I=0.000481542 Monitor2_xt_ERR=2.27486e-07 Monitor2_xt_N=4.48085e+06 "Monitor2_xt_1677634462.y"
Detector: Monitor2_xt_I=0.000481542 Monitor2_xt_ERR=2.27486e-07 Monitor2_xt_N=4.48085e+06 "Monitor2_xt_1677634462.t"

Finally [Test_Fermi: 1]. Time: 1 [s] 

Finally [Test_Fermi: 1]. Time: 1 [s] 
[r6n22.esss.dk:1577071] 1 more process has sent help message help-mpi-btl-openib.txt / no device params found
[r6n22.esss.dk:1577071] Set MCA parameter "orte_base_help_aggregate" to 0 to see all help / error messages
INFO: Placing instr file copy /users/willend/TESTS/2023-03-01/McStas_DUAL_A100_DMSC_5e7/Test_Fermi/Test_Fermi.instr in dataset 1