loading system configuration loading override configuration from /users/willend/McCode/tools/Python/mctest/../mccodelib/mcstas-test/McStas_DUAL_A100_DMSC/mccode_config.json INFO: Using directory: "1" INFO: Using existing c-file: ./ILL_Lagrange.c INFO: Using existing binary: ./ILL_Lagrange.out INFO: === -------------------------------------------------------------------------- WARNING: No preset parameters were found for the device that Open MPI detected: Local host: r6n22 Device name: mlx5_0 Device vendor ID: 0x02c9 Device vendor part ID: 4123 Default device parameters will be used, which may result in lower performance. You can edit any of the files specified by the btl_openib_device_param_files MCA parameter to set values for your device. NOTE: You can turn off this warning by setting the MCA parameter btl_openib_warn_no_device_params_found to 0. -------------------------------------------------------------------------- Simulation 'ILL_Lagrange' (/users/willend/TESTS/2023-03-01/McStas_DUAL_A100_DMSC_5e7/ILL_Lagrange/ILL_Lagrange.instr): running on 2 nodes (master is 'r6n22.esss.dk', MPI version 3.1). Have found 2 GPU devices on rank 0. Will use device 0. Have found 2 GPU devices on rank 1. Will use device 1. ILL_Lagrange: Detailed Lagrange configuration * Incoming beam: lambda=0.897 [Angs] EI=101.7 [meV] KI=7.005 [Angs-1] Vi=4410.29 [m/s] * Monochromator: DM=1.807 [Angs] RV=-0.9031 [m] curved, take-off A1=-14.37 [deg] * Analyser: DA=3.355 [Angs] RV=0.5834 [m] curved, take-off A5=39.45 [deg] * Outgoing beam: lambda=4.264 [Angs] EF=4.5 [meV] KF=1.474 [Angs-1] Vf=927.851 [m/s] [ILL_Lagrange] Initialize ILL_Lagrange: Detailed Lagrange configuration * Incoming beam: lambda=0.897 [Angs] EI=101.7 [meV] KI=7.005 [Angs-1] Vi=4410.29 [m/s] * Monochromator: DM=1.807 [Angs] RV=-0.9031 [m] curved, take-off A1=-14.37 [deg] * Analyser: DA=3.355 [Angs] RV=0.5834 [m] curved, take-off A5=39.45 [deg] * Outgoing beam: lambda=4.264 [Angs] EF=4.5 [meV] KF=1.474 [Angs-1] Vf=927.851 [m/s] [ILL_Lagrange] Initialize PowderN: cryostat_in: Concentric mode - remember to include the 'opposite' copy of this component ! WARNING The equivalent, 'opposite' comp should have concentric=0 Opening input file '/users/willend/McStas/mcstas/3.x-dev/tools/Python/mcrun/../mccodelib/../../../data/Al.laz' (Table_Read_Offset) Table from file 'Al.laz' (block 1) is 26 x 18 (x=1:8), constant step. interpolation: linear '# TITLE *Aluminum-Al-[FM3-M] Miller, H.P.jr.;DuMond, J.W.M.[1942] at 298 K; ...' PowderN: cryostat_in: Reading 26 rows from Al.laz PowderN: cryostat_in: Read 26 reflections from file 'Al.laz' PowderN: cryostat_in: Vc=66.4 [Angs] sigma_abs=0.924 [barn] sigma_inc=0.0328 [barn] reflections=Al.laz Opening input file '/users/willend/McStas/mcstas/3.x-dev/tools/Python/mcrun/../mccodelib/../../../data/Rb_liq_inc.sqw' (Table_Read_Offset) Opening input file '/users/willend/McStas/mcstas/3.x-dev/tools/Python/mcrun/../mccodelib/../../../data/Rb_liq_inc.sqw' (Table_Read_Offset) Opening input file '/users/willend/McStas/mcstas/3.x-dev/tools/Python/mcrun/../mccodelib/../../../data/Rb_liq_inc.sqw' (Table_Read_Offset) Opening input file '/users/willend/McStas/mcstas/3.x-dev/tools/Python/mcrun/../mccodelib/../../../data/Rb_liq_inc.sqw' (Table_Read_Offset) Opening input file '/users/willend/McStas/mcstas/3.x-dev/tools/Python/mcrun/../mccodelib/../../../data/Rb_liq_coh.sqw' (Table_Read_Offset) Opening input file '/users/willend/McStas/mcstas/3.x-dev/tools/Python/mcrun/../mccodelib/../../../data/Rb_liq_coh.sqw' (Table_Read_Offset) Opening input file '/users/willend/McStas/mcstas/3.x-dev/tools/Python/mcrun/../mccodelib/../../../data/Rb_liq_coh.sqw' (Table_Read_Offset) Opening input file '/users/willend/McStas/mcstas/3.x-dev/tools/Python/mcrun/../mccodelib/../../../data/Rb_liq_coh.sqw' (Table_Read_Offset) [r6n22.esss.dk:1573171] 1 more process has sent help message help-mpi-btl-openib.txt / no device params found [r6n22.esss.dk:1573171] Set MCA parameter "orte_base_help_aggregate" to 0 to see all help / error messages Opening input file '/users/willend/McStas/mcstas/3.x-dev/tools/Python/mcrun/../mccodelib/../../../data/Al.laz' (Table_Read_Offset) Table from file 'Al.laz' (block 1) is 26 x 18 (x=1:8), constant step. interpolation: linear '# TITLE *Aluminum-Al-[FM3-M] Miller, H.P.jr.;DuMond, J.W.M.[1942] at 298 K; ...' PowderN: cryostat_out: Reading 26 rows from Al.laz PowderN: cryostat_out: Read 26 reflections from file 'Al.laz' PowderN: cryostat_out: Vc=66.4 [Angs] sigma_abs=0.924 [barn] sigma_inc=0.0328 [barn] reflections=Al.laz Opening input file '/users/willend/McStas/mcstas/3.x-dev/tools/Python/mcrun/../mccodelib/../../../data/HOPG.rfl' (Table_Read_Offset) *** TRACE end *** Save [ILL_Lagrange] Detector: PSD_I=1.97379e+09 PSD_ERR=811304 PSD_N=5.9345e+06 "PSD1.dat" Detector: Lmon1_I=9.00701e+09 Lmon1_ERR=1.73304e+06 Lmon1_N=2.70827e+07 "Lmon1.dat" Detector: Lmon2_I=3.31583e+09 Lmon2_ERR=332213 Lmon2_N=9.98095e+07 "Lmon2.dat" Detector: Sample_mon_I=1.1854e+08 Sample_mon_ERR=20877.6 Sample_mon_N=3.22619e+07 "Sample_mon_1677634063.x_y" Detector: Barrel_PSD_monitor_I=3.66168e+06 Barrel_PSD_monitor_ERR=1286.09 Barrel_PSD_monitor_N=2.96094e+07 "Barrel_PSD_monitor_1677634068.th_y" Detector: Barrel_PSD_monitor2_I=1.67923e+06 Barrel_PSD_monitor2_ERR=869.967 Barrel_PSD_monitor2_N=1.36586e+07 "Barrel_PSD_monitor2_1677634068.th_E" Detector: Barrel_PSD_monitor3_I=1.03931e+06 Barrel_PSD_monitor3_ERR=685.413 Barrel_PSD_monitor3_N=6.07465e+06 "Barrel_PSD_monitor3_1677634068.E_y" Detector: Detector_I=3744.94 Detector_ERR=13.072 Detector_N=215770 "Detector_1677634068.E_y" Detector: Detector_Sqw_I=644596 Detector_Sqw_ERR=170.614 Detector_Sqw_N=4.49588e+07 "Detector_Sqw.dat" Detector: Detector_Sqw_env_I=4790.79 Detector_Sqw_env_ERR=1.65963 Detector_Sqw_env_N=2.86097e+07 "Detector_Sqw_env.dat" Finally [ILL_Lagrange: 1]. Time: 45 [s] Finally [ILL_Lagrange: 1]. Time: 45 [s] Isotropic_Sqw: Sample: 2 neutron events (out of 2033359) that should have scattered were transmitted because scattering conditions WARNING could not be satisfied after 100 tries. INFO: Placing instr file copy /users/willend/TESTS/2023-03-01/McStas_DUAL_A100_DMSC_5e7/ILL_Lagrange/ILL_Lagrange.instr in dataset 1