loading system configuration
loading user configuration from /users/willend/.mcstas/3.x-dev/mccode_config.json
loading override configuration from /users/willend/McCode/tools/Python/mctest/../mccodelib/mcstas-test/McStas_DUAL_A100_DMSC/mccode_config.json
INFO: Using directory: "1"
INFO: Using existing c-file: ./HZB_FLEX.c
INFO: Using existing binary: ./HZB_FLEX.out
INFO: ===
--------------------------------------------------------------------------
WARNING: No preset parameters were found for the device that Open MPI
detected:

  Local host:            r6n22
  Device name:           mlx5_0
  Device vendor ID:      0x02c9
  Device vendor part ID: 4123

Default device parameters will be used, which may result in lower
performance.  You can edit any of the files specified by the
btl_openib_device_param_files MCA parameter to set values for your
device.

NOTE: You can turn off this warning by setting the MCA parameter
      btl_openib_warn_no_device_params_found to 0.
--------------------------------------------------------------------------
Simulation 'HZB_FLEX' (/users/willend/TESTS/2022-12-01/McStas_DUAL_A100_DMSC_5e7/HZB_FLEX/HZB_FLEX.instr): running on 2 nodes (master is 'r6n22.esss.dk', MPI version 3.1).
Have found 2 GPU devices on rank 0. Will use device 0.
Have found 2 GPU devices on rank 1. Will use device 1.
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
[HZB_FLEX] Initialize
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
[HZB_FLEX] Initialize
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
*** TRACE end *** 

Save [HZB_FLEX]
Detector: Before_selec_I=2.97102e+07 Before_selec_ERR=19607.1 Before_selec_N=4.14319e+06 "PSD_monitor_before.dat"
Detector: After_selec_I=2.03625e+07 After_selec_ERR=16240.9 After_selec_N=2.42091e+06 "PSD_monitor_after.dat"
<E> : 4.98331 meV , E-width : 0.449359 meV 
Detector: energy_endguide_I=1.32655e+07 energy_endguide_ERR=12555.7 energy_endguide_N=1.64431e+06 "energy-endguide.dat"
<E> : 5.03478 meV , E-width : -nan meV 
<E> : 4.97741 meV , E-width : 0.275157 meV 
Detector: energy_mono_I=4.32064e+06 energy_mono_ERR=7168.53 energy_mono_N=531139 "energy-mono.dat"
<E> : 4.98306 meV , E-width : 0.0346336 meV 
Detector: energy_pre_sample_I=3.65479e+06 energy_pre_sample_ERR=6680.33 energy_pre_sample_N=384754 "energy-pre-sample.dat"
<E> : 5.01625 meV , E-width : -nan meV 
<E> : 4.98107 meV , E-width : -nan meV 
Detector: div_mono_I=4.06613e+06 div_mono_ERR=6995.14 div_mono_N=453883 "div-sample.dat"
Detector: div_mono_H_I=358782 div_mono_H_ERR=2063.48 div_mono_H_N=44474 "H-div-sample.dat"
Detector: psd_sam_I=4.33701e+06 psd_sam_ERR=7176.41 psd_sam_N=537164 "psd-sam.dat"

Finally [HZB_FLEX: 1]. Time: 2 [s] 
Detector: dpsd1_I=4.33701e+06 dpsd1_ERR=7176.41 dpsd1_N=537164 "linpsdsam.dat"

Finally [HZB_FLEX: 1]. Time: 2 [s] 
[r6n22.esss.dk:3382593] 1 more process has sent help message help-mpi-btl-openib.txt / no device params found
[r6n22.esss.dk:3382593] Set MCA parameter "orte_base_help_aggregate" to 0 to see all help / error messages
INFO: Placing instr file copy /users/willend/TESTS/2022-12-01/McStas_DUAL_A100_DMSC_5e7/HZB_FLEX/HZB_FLEX.instr in dataset 1