loading system configuration
loading user configuration from /users/willend/.mcstas/3.x-dev/mccode_config.json
loading override configuration from /users/willend/McCode/tools/Python/mctest/../mccodelib/mcstas-test/McStas_DUAL_A100_DMSC/mccode_config.json
INFO: Using directory: "4"
INFO: Using existing c-file: ./Test_Sources.c
INFO: Using existing binary: ./Test_Sources.out
INFO: ===
--------------------------------------------------------------------------
WARNING: No preset parameters were found for the device that Open MPI
detected:

  Local host:            r6n22
  Device name:           mlx5_0
  Device vendor ID:      0x02c9
  Device vendor part ID: 4123

Default device parameters will be used, which may result in lower
performance.  You can edit any of the files specified by the
btl_openib_device_param_files MCA parameter to set values for your
device.

NOTE: You can turn off this warning by setting the MCA parameter
      btl_openib_warn_no_device_params_found to 0.
--------------------------------------------------------------------------
Simulation 'Test_Sources' (/users/willend/TESTS/2022-11-01/McStas_DUAL_A100_DMSC_5e7/Test_Sources/Test_Sources.instr): running on 2 nodes (master is 'r6n22.esss.dk', MPI version 3.1).
Have found 2 GPU devices on rank 1. Will use device 1.
Have found 2 GPU devices on rank 0. Will use device 0.
Test_Sources: Using Source_gen
Studied wavelength range is [1 11] AA
[Test_Sources] Initialize
sa7: Setting up for sector W, beamline 8, global orientation angle is 108.7, internal angle 15
sa7: Focusing at rectagle sized 0.1 x 0.1 
  - positioned at location (x,y,z)=(0 m, 0 m, 1 m) 
 ( from dist parameter -> distance 1 )
sa7: Cold and Thermal brilliance performance multiplicators are c_performance=1 and t_performance=1
sa7: NOT using time focusing
Test_Sources: Using Source_gen
Studied wavelength range is [1 11] AA
[Test_Sources] Initialize
Source_gen: component sa5 (square 0.01 x 0.01)
            focusing distance dist=1 area=0.1 x 0.1
            spectra 1.000 to 11.000 AA (0.676 to 81.810 meV)
            T1=216.8 K (2.093 AA), T2=33.9 K (5.292 AA), T3=16.7 K (7.539 AA)
  Flux is dPhi/dlambda in [n/s/cm2].
sa7: Setting up for sector W, beamline 8, global orientation angle is 108.7, internal angle 15
sa7: Focusing at rectagle sized 0.1 x 0.1 
  - positioned at location (x,y,z)=(0 m, 0 m, 1 m) 
 ( from dist parameter -> distance 1 )
sa7: Cold and Thermal brilliance performance multiplicators are c_performance=1 and t_performance=1
sa7: NOT using time focusing
*** TRACE end *** 
Storing event logfile -->  4/Events_1.log

Save [Test_Sources]
Storing event logfile -->  4/Events_0.log
Done storing logfile.
Done storing logfile.
Detector: m1_I=2.42312e+11 m1_ERR=4.81393e+07 m1_N=5e+07 "m1_1667267506.L"
Detector: m2_I=2.42312e+11 m2_ERR=4.81393e+07 m2_N=5e+07 "m2_1667267506.x_y"
Detector: m3_I=2.42312e+11 m3_ERR=4.81393e+07 m3_N=5e+07 "m3_1667267506.hd_vd"

Finally [Test_Sources: 4]. Time: 0 [s] 

Finally [Test_Sources: 4]. Time: 0 [s] 
[r6n22.esss.dk:4150887] 1 more process has sent help message help-mpi-btl-openib.txt / no device params found
[r6n22.esss.dk:4150887] Set MCA parameter "orte_base_help_aggregate" to 0 to see all help / error messages
INFO: Placing instr file copy /users/willend/TESTS/2022-11-01/McStas_DUAL_A100_DMSC_5e7/Test_Sources/Test_Sources.instr in dataset 4