loading system configuration
loading user configuration from /users/willend/.mcstas/3.x-dev/mccode_config.json
loading override configuration from /users/willend/McCode/tools/Python/mctest/../mccodelib/mcstas-test/McStas_DUAL_A100_DMSC/mccode_config.json
INFO: Using directory: "1"
INFO: Using existing c-file: ./PSI_DMC.c
INFO: Using existing binary: ./PSI_DMC.out
INFO: ===
--------------------------------------------------------------------------
WARNING: No preset parameters were found for the device that Open MPI
detected:

  Local host:            r6n22
  Device name:           mlx5_0
  Device vendor ID:      0x02c9
  Device vendor part ID: 4123

Default device parameters will be used, which may result in lower
performance.  You can edit any of the files specified by the
btl_openib_device_param_files MCA parameter to set values for your
device.

NOTE: You can turn off this warning by setting the MCA parameter
      btl_openib_warn_no_device_params_found to 0.
--------------------------------------------------------------------------
Simulation 'PSI_DMC' (/users/willend/TESTS/2022-11-01/McStas_DUAL_A100_DMSC_5e7/PSI_DMC/PSI_DMC.instr): running on 2 nodes (master is 'r6n22.esss.dk', MPI version 3.1).
Have found 2 GPU devices on rank 1. Will use device 1.
Have found 2 GPU devices on rank 0. Will use device 0.
[PSI_DMC] Initialize
[PSI_DMC] Initialize
Table from file '' (catenated) is empty.
Table from file '' (catenated) is empty.
WARNING(sample): p_inc=0, adjusting to 0.01, to avoid algorithm instability
WARNING(sample): p_transmit=0, adjusting to 0.01, to avoid algorithm instability
WARNING(sample): p_inc=0, adjusting to 0.01, to avoid algorithm instability
WARNING(sample): p_transmit=0, adjusting to 0.01, to avoid algorithm instability
Opening input file '/users/willend/McStas/mcstas/3.x-dev/tools/Python/mcrun/../mccodelib/../../../data/Na2Ca3Al2F14.laz' (Table_Read_Offset)
Table from file 'Na2Ca3Al2F14.laz' (block 1) is 841 x 18 (x=1:20), constant step. interpolation: linear
  '# TITLE *-Na2Ca3Al2F14-[I213] Courbion, G.;Ferey, G.[1988] Standard NAC cal ...'
PowderN: sample: Reading 841 rows from Na2Ca3Al2F14.laz
PowderN: sample: Read 841 reflections from file 'Na2Ca3Al2F14.laz'
PowderN: sample: Vc=1079.1 [Angs] sigma_abs=11.7856 [barn] sigma_inc=13.6704 [barn] reflections=Na2Ca3Al2F14.laz
*** TRACE end *** 

Save [PSI_DMC]
Detector: PSDbefore_guides_I=2.5433e+09 PSDbefore_guides_ERR=359681 PSDbefore_guides_N=4.99996e+07 "PSDbefore_guides.dat"
Detector: l_mon_source_I=2.5433e+09 l_mon_source_ERR=359681 l_mon_source_N=4.99996e+07 "lmonsource.dat"
Detector: PSDbefore_curve_I=1.13092e+08 PSDbefore_curve_ERR=73132.2 PSDbefore_curve_N=6.28972e+06 "PSDbefore_curve.dat"
Detector: PSDafter_curve_I=4.72184e+07 PSDafter_curve_ERR=46766.2 PSDafter_curve_N=4.76488e+06 "PSDafter_curve.dat"
Detector: ydist_fluxpos_I=3.54613e+07 ydist_fluxpos_ERR=40022.6 ydist_fluxpos_N=3.91484e+06 "ydist_fluxpos.dat"
Detector: PSD_fluxpos_I=3.54613e+07 PSD_fluxpos_ERR=40022.6 PSD_fluxpos_N=3.91484e+06 "xdist_fluxposy.dat"
Detector: xdist_flux_pos_I=3.54613e+07 xdist_flux_pos_ERR=40022.6 xdist_flux_pos_N=3.91484e+06 "xdist_fluxpos.dat"
Detector: PSD_fluxposB_I=3.24927e+07 PSD_fluxposB_ERR=38379.9 PSD_fluxposB_N=3.11953e+06 "PSD_fluxposB.dat"
Detector: lambda_in_I=3.23522e+07 lambda_in_ERR=38221.2 lambda_in_N=3.11665e+06 "L_in.dat"
Detector: PSD_sample_I=1.44014e+07 PSD_sample_ERR=6254.98 PSD_sample_N=2.0708e+07 "PSD_sample.dat"
Detector: lambda_sample_I=2.01136e+06 lambda_sample_ERR=2479.26 lambda_sample_N=1.23693e+06 "L_sample.dat"
Detector: Detector_I=825.328 Detector_ERR=1.49272 Detector_N=1.67975e+06 "detector.dat"

Finally [PSI_DMC: 1]. Time: 3 [s] 

Finally [PSI_DMC: 1]. Time: 3 [s] 
[r6n22.esss.dk:4140580] 1 more process has sent help message help-mpi-btl-openib.txt / no device params found
[r6n22.esss.dk:4140580] Set MCA parameter "orte_base_help_aggregate" to 0 to see all help / error messages
INFO: Placing instr file copy /users/willend/TESTS/2022-11-01/McStas_DUAL_A100_DMSC_5e7/PSI_DMC/PSI_DMC.instr in dataset 1