loading system configuration loading user configuration from /users/willend/.mcstas/3.x-dev/mccode_config.json loading override configuration from /users/willend/McCode/tools/Python/mctest/../mccodelib/mcstas-test/McStas_DUAL_A100_DMSC/mccode_config.json INFO: Using directory: "1" INFO: Using existing c-file: ./ESS_butterfly_tfocus_NOFOCUS_test.c INFO: Using existing binary: ./ESS_butterfly_tfocus_NOFOCUS_test.out INFO: === -------------------------------------------------------------------------- WARNING: No preset parameters were found for the device that Open MPI detected: Local host: r6n22 Device name: mlx5_0 Device vendor ID: 0x02c9 Device vendor part ID: 4123 Default device parameters will be used, which may result in lower performance. You can edit any of the files specified by the btl_openib_device_param_files MCA parameter to set values for your device. NOTE: You can turn off this warning by setting the MCA parameter btl_openib_warn_no_device_params_found to 0. -------------------------------------------------------------------------- Simulation 'ESS_butterfly_tfocus_NOFOCUS_test' (/users/willend/TESTS/2022-11-01/McStas_DUAL_A100_DMSC_5e7/ESS_butterfly_tfocus_NOFOCUS_test/ESS_butterfly_tfocus_NOFOCUS_test.instr): running on 2 nodes (master is 'r6n22.esss.dk', MPI version 3.1). Have found 2 GPU devices on rank 1. Will use device 1. Have found 2 GPU devices on rank 0. Will use device 0. [ESS_butterfly_tfocus_NOFOCUS_test] Initialize Source: Setting up for sector N, beamline 1, global orientation angle is 30, internal angle 55 Source: Focusing at rectagle sized 0.1 x 0.1 - positioned at location (x,y,z)=(0 m, 0 m, 100 m) ( from dist parameter -> distance 100 ) Source: Cold and Thermal brilliance performance multiplicators are c_performance=1 and t_performance=1 Source: NOT using time focusing [ESS_butterfly_tfocus_NOFOCUS_test] Initialize Source: Setting up for sector N, beamline 1, global orientation angle is 30, internal angle 55 Source: Focusing at rectagle sized 0.1 x 0.1 - positioned at location (x,y,z)=(0 m, 0 m, 100 m) ( from dist parameter -> distance 100 ) Source: Cold and Thermal brilliance performance multiplicators are c_performance=1 and t_performance=1 Source: NOT using time focusing *** TRACE end *** Save [ESS_butterfly_tfocus_NOFOCUS_test] Detector: AutoTOFL0_I=2.08911e+09 AutoTOFL0_ERR=1.20692e+06 AutoTOFL0_N=2.78393e+07 "AutoTOFL0_1667264292.t_L" Detector: AutoTOF0_I=2.08911e+09 AutoTOF0_ERR=1.20692e+06 AutoTOF0_N=2.78244e+07 "AutoTOF0_1667264292.t" Detector: AutoL0_I=2.08943e+09 AutoL0_ERR=1.20692e+06 AutoL0_N=5e+07 "AutoL0_1667264292.L" Detector: PSD0_I=2.08943e+09 PSD0_ERR=1.20692e+06 PSD0_N=5e+07 "flat.x_y" Detector: PSD1_I=1.64175e+09 PSD1_ERR=1.05898e+06 PSD1_N=4.76987e+07 "flatC.x_y" Detector: PSD2_I=1.4924e+09 PSD2_ERR=1.03148e+06 PSD2_N=2.73041e+07 "flatT.x_y" Detector: MonND1_I=9.11028e+08 MonND1_ERR=808449 MonND1_N=2.41072e+07 "MonND1_1667264292.U1" Detector: CWidth_I=1.19389e+09 CWidth_ERR=886447 CWidth_N=4.53966e+07 "CWidth_1667264292.U1" Detector: TWidth_I=6.27606e+08 TWidth_ERR=722322 TWidth_N=2.8241e+06 "TWidth_1667264292.U1" Detector: MonND2_I=1.0449e+09 MonND2_ERR=853440 MonND2_N=2.4998e+07 "MonND2_1667264292.U1" Detector: MonND2_2_I=1.04453e+09 MonND2_2_ERR=853398 MonND2_2_N=2.5002e+07 "MonND2_2_1667264292.U1" Detector: MonND3_I=2.08943e+09 MonND3_ERR=1.20692e+06 MonND3_N=5e+07 "MonND3_1667264292.U1_U2" Detector: MonND4_I=2.08943e+09 MonND4_ERR=1.20692e+06 MonND4_N=5e+07 "MonND4_1667264292.U1_U2" Detector: AutoTOFL_I=2.08943e+09 AutoTOFL_ERR=1.20692e+06 AutoTOFL_N=5e+07 "AutoTOFL_1667264292.t_L" Detector: BrillmonCOLD_I=5.37561e+10 BrillmonCOLD_ERR=2.75903e+08 BrillmonCOLD_N=964697 "Mean_brillCOLD.dat" Detector: BrillmonCOLD_I=1.44702e+12 BrillmonCOLD_ERR=3.01067e+07 BrillmonCOLD_N=47987 "Peak_brillCOLD.dat" Detector: BrillmonCOLD_I=9.45882e+12 BrillmonCOLD_ERR=8.78748e+06 BrillmonCOLD_N=964697 "brillCOLD.dat" Detector: BrillmonCOLD_COLL_I=0 BrillmonCOLD_COLL_ERR=0 BrillmonCOLD_COLL_N=0 "Mean_brillCOLD_COLL.dat" Detector: BrillmonCOLD_COLL_I=0 BrillmonCOLD_COLL_ERR=0 BrillmonCOLD_COLL_N=0 "Peak_brillCOLD_COLL.dat" Detector: BrillmonCOLD_COLL_I=0 BrillmonCOLD_COLL_ERR=0 BrillmonCOLD_COLL_N=0 "brillCOLD_COLL.dat" Detector: BrillmonTHRM_I=3.55217e+10 BrillmonTHRM_ERR=1.8289e+08 BrillmonTHRM_N=964082 "Mean_brillTHRM.dat" Detector: BrillmonTHRM_I=9.59428e+11 BrillmonTHRM_ERR=1.99094e+07 BrillmonTHRM_N=48074 "Peak_brillTHRM.dat" Detector: BrillmonTHRM_I=6.25034e+12 BrillmonTHRM_ERR=5.43427e+06 BrillmonTHRM_N=964082 "brillTHRM.dat" Detector: BrillmonTHRM_COLL_I=7.99239e+10 BrillmonTHRM_COLL_ERR=4.11502e+08 BrillmonTHRM_COLL_N=964082 "Mean_brillTHRM_COLL.dat" Detector: BrillmonTHRM_COLL_I=2.15871e+12 BrillmonTHRM_COLL_ERR=4.48563e+07 BrillmonTHRM_COLL_N=48074 "Peak_brillTHRM_COLL.dat" Detector: BrillmonTHRM_COLL_I=1.40633e+13 BrillmonTHRM_COLL_ERR=1.3589e+07 BrillmonTHRM_COLL_N=964082 "brillTHRM_COLL.dat" Detector: AutoTOFLend_I=1.52674e+08 AutoTOFLend_ERR=343723 AutoTOFLend_N=998719 "AutoTOFLend_1667264292.t_L" Finally [ESS_butterfly_tfocus_NOFOCUS_test: 1]. Time: 1 [s] Finally [ESS_butterfly_tfocus_NOFOCUS_test: 1]. Time: 1 [s] [r6n22.esss.dk:4136092] 1 more process has sent help message help-mpi-btl-openib.txt / no device params found [r6n22.esss.dk:4136092] Set MCA parameter "orte_base_help_aggregate" to 0 to see all help / error messages INFO: Placing instr file copy /users/willend/TESTS/2022-11-01/McStas_DUAL_A100_DMSC_5e7/ESS_butterfly_tfocus_NOFOCUS_test/ESS_butterfly_tfocus_NOFOCUS_test.instr in dataset 1