loading system configuration loading user configuration from /users/willend/.mcstas/3.x-dev/mccode_config.json loading override configuration from /users/willend/McCode/tools/Python/mctest/../mccodelib/mcstas-test/McStas_DUAL_A100_DMSC/mccode_config.json INFO: Using directory: "1" INFO: Using existing c-file: ./ESS_IN5_reprate.c INFO: Using existing binary: ./ESS_IN5_reprate.out INFO: === -------------------------------------------------------------------------- WARNING: No preset parameters were found for the device that Open MPI detected: Local host: r6n22 Device name: mlx5_0 Device vendor ID: 0x02c9 Device vendor part ID: 4123 Default device parameters will be used, which may result in lower performance. You can edit any of the files specified by the btl_openib_device_param_files MCA parameter to set values for your device. NOTE: You can turn off this warning by setting the MCA parameter btl_openib_warn_no_device_params_found to 0. -------------------------------------------------------------------------- Simulation 'ESS_IN5_reprate' (/users/willend/TESTS/2022-11-01/McStas_DUAL_A100_DMSC_5e7/ESS_IN5_reprate/ESS_IN5_reprate.instr): running on 2 nodes (master is 'r6n22.esss.dk', MPI version 3.1). Have found 2 GPU devices on rank 1. Will use device 1. Have found 2 GPU devices on rank 0. Will use device 0. source: Setting up for sector W, beamline 5, global orientation angle is 126, internal angle 35 source: Focusing at rectagle sized 0.1 x 0.105 - positioned at location (x,y,z)=(0 m, 0 m, 2 m) ( from target_index 6 -> distance 2 ) source: Cold and Thermal brilliance performance multiplicators are c_performance=1 and t_performance=1 source: NOT using time focusing [ESS_IN5_reprate] Initialize source: Setting up for sector W, beamline 5, global orientation angle is 126, internal angle 35 source: Focusing at rectagle sized 0.1 x 0.105 - positioned at location (x,y,z)=(0 m, 0 m, 2 m) ( from target_index 6 -> distance 2 ) source: Cold and Thermal brilliance performance multiplicators are c_performance=1 and t_performance=1 source: NOT using time focusing [ESS_IN5_reprate] Initialize DiskChopper: FOchop2 WARNING: chopper frequency is 0! DiskChopper: Fastchop1 WARNING: chopper frequency is 0! DiskChopper: FOchop2 WARNING: chopper frequency is 0! DiskChopper: Fastchop1 WARNING: chopper frequency is 0! *** TRACE end *** Save [ESS_IN5_reprate] Detector: TOFmoderator_zoom_I=4.89306e+10 TOFmoderator_zoom_ERR=1.34642e+07 TOFmoderator_zoom_N=2.04923e+07 "TOFmoderator_zoom.dat" Detector: TOFmoderator_I=4.89416e+10 TOFmoderator_ERR=1.34642e+07 TOFmoderator_N=3.59882e+07 "TOFmoderator.dat" Detector: Lmon_guistart_I=6.75237e+10 Lmon_guistart_ERR=1.57882e+07 Lmon_guistart_N=4.98037e+07 "Lmon_guistart.dat" Detector: Lmon_normalize_I=5.83179e+10 Lmon_normalize_ERR=1.46727e+07 Lmon_normalize_N=4.30067e+07 "Lmon_guistart_normalize.dat" Detector: Lmonslow1_I=2.20783e+10 Lmonslow1_ERR=8.63278e+06 Lmonslow1_N=1.98362e+07 "Lmonslow1.dat" Detector: PSDslow1_I=3.58766e+10 PSDslow1_ERR=1.10587e+07 PSDslow1_N=3.41558e+07 "PSDslow1.dat" Detector: TOFLmon1_I=1.84803e+10 TOFLmon1_ERR=7.88833e+06 TOFLmon1_N=1.63731e+07 "TOFLmon1.dat" Detector: Lmon_afterslow1_I=2.20782e+10 Lmon_afterslow1_ERR=8.63278e+06 Lmon_afterslow1_N=1.98362e+07 "Lmon_afterslow1.dat" Detector: PSD_afterslow1_I=3.58765e+10 PSD_afterslow1_ERR=1.10587e+07 PSD_afterslow1_N=3.41558e+07 "PSD_afterslow1.dat" Detector: Lmon_slow2_I=1.3946e+10 Lmon_slow2_ERR=6.57429e+06 Lmon_slow2_N=1.60632e+07 "Lmon_slow2.dat" Detector: PSD_afterslow2_I=2.31731e+10 PSD_afterslow2_ERR=8.48223e+06 PSD_afterslow2_N=2.66232e+07 "PSD_afterslow2.dat" Detector: Lmon_afterslow2_I=1.39428e+10 Lmon_afterslow2_ERR=6.57334e+06 Lmon_afterslow2_N=1.60813e+07 "Lmon_afterslow2.dat" Detector: TOFL_afterslow2_I=1.16241e+10 TOFL_afterslow2_ERR=6.00159e+06 TOFL_afterslow2_N=1.34099e+07 "TOFL_afterslow2.dat" Detector: Lmon_beforeballistic_I=1.14217e+10 Lmon_beforeballistic_ERR=5.90172e+06 Lmon_beforeballistic_N=1.41345e+07 "Lmon_before_ballistic.dat" Detector: PSD_beforeballistic_I=2.25982e+10 PSD_beforeballistic_ERR=8.30487e+06 PSD_beforeballistic_N=2.79278e+07 "PSD_beforeballistic.dat" Detector: Lmonfast2_I=1.18322e+10 Lmonfast2_ERR=6.08677e+06 Lmonfast2_N=1.46396e+07 "Lmonfast2.dat" Detector: Lmonfast2_zoom_I=1.18322e+10 Lmonfast2_zoom_ERR=6.08677e+06 Lmonfast2_zoom_N=1.46396e+07 "Lmonfast2_zoom.dat" Detector: TOFLfast2_I=1.18322e+10 TOFLfast2_ERR=6.08677e+06 TOFLfast2_N=1.46396e+07 "TOFLfast2.dat" Detector: TOFLfast2zoom_I=4.64732e+09 TOFLfast2zoom_ERR=3.84073e+06 TOFLfast2zoom_N=2.71238e+06 "TOFLfast2_zoom.dat" Detector: PSDfast2_I=1.18322e+10 PSDfast2_ERR=6.08677e+06 PSDfast2_N=1.46396e+07 "PSDfast2.dat" Detector: TOFfast2_zoom_I=0 TOFfast2_zoom_ERR=0 TOFfast2_zoom_N=0 "TOF_fast2.dat" Detector: Lmon_afterfast2_I=0 Lmon_afterfast2_ERR=0 Lmon_afterfast2_N=0 "Lmon_afterfast2.dat" Detector: TOFL_afterfast2_I=0 TOFL_afterfast2_ERR=0 TOFL_afterfast2_N=0 "TOF_afterfast2.dat" Detector: TOFL_afterfast2_zoom_I=0 TOFL_afterfast2_zoom_ERR=0 TOFL_afterfast2_zoom_N=0 "TOFL_afterfast2_zoom.dat" Detector: PSD_afterfast2_I=0 PSD_afterfast2_ERR=0 PSD_afterfast2_N=0 "PSD_afterfast2.dat" Detector: Lmon_guideend_I=0 Lmon_guideend_ERR=0 Lmon_guideend_N=0 "Lmon_guideend.dat" Detector: PSDsample_I=0 PSDsample_ERR=0 PSDsample_N=0 "PSDsample.dat" Detector: TOFsample_zoom_I=0 TOFsample_zoom_ERR=0 TOFsample_zoom_N=0 "TOF_sample.dat" Detector: Esample_I=0 Esample_ERR=0 Esample_N=0 "Esample.dat" Detector: Lmon_sample_zoom_I=0 Lmon_sample_zoom_ERR=0 Lmon_sample_zoom_N=0 "LMON_sample_zoom.dat" Detector: TOFdetector_I=0 TOFdetector_ERR=0 TOFdetector_N=0 "TOF.dat" Detector: TOFdetector_zoom_I=0 TOFdetector_zoom_ERR=0 TOFdetector_zoom_N=0 "TOF_zoom.dat" Detector: Edetector_I=0 Edetector_ERR=0 Edetector_N=0 "Edet.dat" Finally [ESS_IN5_reprate: 1]. Time: 1 [s] Detector: TOF2Edetector_I=0 TOF2Edetector_ERR=0 TOF2Edetector_N=0 "TOF2E.dat" Finally [ESS_IN5_reprate: 1]. Time: 1 [s] [r6n22.esss.dk:4135786] 1 more process has sent help message help-mpi-btl-openib.txt / no device params found [r6n22.esss.dk:4135786] Set MCA parameter "orte_base_help_aggregate" to 0 to see all help / error messages INFO: Placing instr file copy /users/willend/TESTS/2022-11-01/McStas_DUAL_A100_DMSC_5e7/ESS_IN5_reprate/ESS_IN5_reprate.instr in dataset 1