loading system configuration loading override configuration from /home/nexmap/pkwi/McCode/tools/Python/mctest/../mccodelib/mcstas-test/McStas_8GPU/mccode_config.json INFO: Using directory: "1" INFO: Using existing c-file: ./ESS_BEER_MCPL.c INFO: Using existing binary: ./ESS_BEER_MCPL.out INFO: === Simulation 'ESS_BEER_MCPL' (/home/nexmap/pkwi/TESTS/2022-11-01/McStas_8GPU_5e7/ESS_BEER_MCPL/ESS_BEER_MCPL.instr): running on 7 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). Have found 8 GPU devices on rank 0. Will use device 0. Using the input file: BEER_MR.mcpl Using the sample file: duplex.laz INFO: Collimator radius=0.16, height=0.105744 -> 0.293308 Have found 8 GPU devices on rank 4. Will use device 4. Using the input file: BEER_MR.mcpl Using the sample file: duplex.laz INFO: Collimator radius=0.16, height=0.105744 -> 0.293308 Have found 8 GPU devices on rank 5. Will use device 5. Chopper delay = 3.36195, mod_period = 0.446429 [ms] Mean ToF [ms] = 80.8891 Selected energy range: 9.72702 to 67.6068 meV Chopper delay = 3.36195, mod_period = 0.446429 [ms] Mean ToF [ms] = 80.8891 Selected energy range: 9.72702 to 67.6068 meV [ESS_BEER_MCPL] Initialize [ESS_BEER_MCPL] Initialize Message(src): MCPL file (BEER_MR.mcpl) produced with SIMRES. Message(src): MCPL file (BEER_MR.mcpl) contains 10000 particles. Warning: You are using MCPL_input with a repeat_count of 50: - Minimum neutron count requested is 10000 x 50 <= 80000 x 7 MPI nodes = 560000 neutrons total OpenACC, preload implicit: Preload requested, loading MCPLfile in INITIALIZE Message(src): MCPL file (BEER_MR.mcpl) produced with SIMRES. Message(src): MCPL file (BEER_MR.mcpl) contains 10000 particles. OpenACC, preload implicit: Preload requested, loading MCPLfile in INITIALIZE Initiating file read... Initiating file read... Done reading MCPL file, found 10000 neutrons Warning: You are using MCPL_input with a repeat_count of 50: - Neutron count requested is 10000 x 50 <= 80000 neutrons total Done reading MCPL file, found 10000 neutrons Warning: You are using MCPL_input with a repeat_count of 50: - Neutron count requested is 10000 x 50 <= 80000 neutrons total WARNING(sample): p_transmit=0, adjusting to 0.01, to avoid algorithm instability Opening input file '/u/data/pkwi/McStas/mcstas/3.x-dev/tools/Python/mcrun/../mccodelib/../../../data/duplex.laz' (Table_Read_Offset) WARNING(sample): p_transmit=0, adjusting to 0.01, to avoid algorithm instability Table from file 'duplex.laz' (block 1) is 39 x 18 (x=1:7), constant step. interpolation: linear '# Duplex steel 0.5-alpha, 0.5-gamma, fake structure file normalized on alph ...' PowderN: sample: Reading 39 rows from duplex.laz PowderN: sample: Read 39 reflections from file 'duplex.laz' PowderN: sample: Vc=24.04 [Angs] sigma_abs=5.12 [barn] sigma_inc=0.8 [barn] reflections=duplex.laz PowderN: Target direction = (4.32978e-17 -0.707107 0.707107) PowderN: Target direction = (4.32978e-17 -0.707107 0.707107) Exact_radial_coll: rad2: foil thickness is 0.1 [millimeter] opening each input slit [0.424:106] [millimeter] opening each output slit [1.57:293] [millimeter] divergence per channel is 9.78565 [min] Exact_radial_coll: rad2: foil thickness is 0.1 [millimeter] opening each input slit [0.424:106] [millimeter] opening each output slit [1.57:293] [millimeter] divergence per channel is 9.78565 [min] dhklmon: Modulation off *** TRACE end *** Have found 8 GPU devices on rank 2. Will use device 2. Using the input file: BEER_MR.mcpl Using the sample file: duplex.laz INFO: Collimator radius=0.16, height=0.105744 -> 0.293308 Have found 8 GPU devices on rank 1. Will use device 1. Using the input file: BEER_MR.mcpl Using the sample file: duplex.laz Using the input file: BEER_MR.mcpl Using the sample file: duplex.laz INFO: Collimator radius=0.16, height=0.105744 -> 0.293308 INFO: Collimator radius=0.16, height=0.105744 -> 0.293308 Have found 8 GPU devices on rank 6. Will use device 6. Using the input file: BEER_MR.mcpl Using the sample file: duplex.laz INFO: Collimator radius=0.16, height=0.105744 -> 0.293308 Have found 8 GPU devices on rank 3. Will use device 3. Using the input file: BEER_MR.mcpl Using the sample file: duplex.laz INFO: Collimator radius=0.16, height=0.105744 -> 0.293308 Chopper delay = 3.36195, mod_period = 0.446429 [ms] Mean ToF [ms] = 80.8891 Selected energy range: 9.72702 to 67.6068 meV [ESS_BEER_MCPL] Initialize Message(src): MCPL file (BEER_MR.mcpl) produced with SIMRES. Message(src): MCPL file (BEER_MR.mcpl) contains 10000 particles. OpenACC, preload implicit: Preload requested, loading MCPLfile in INITIALIZE Initiating file read... Done reading MCPL file, found 10000 neutrons Warning: You are using MCPL_input with a repeat_count of 50: - Neutron count requested is 10000 x 50 <= 80000 neutrons total WARNING(sample): p_transmit=0, adjusting to 0.01, to avoid algorithm instability PowderN: Target direction = (4.32978e-17 -0.707107 0.707107) Exact_radial_coll: rad2: foil thickness is 0.1 [millimeter] opening each input slit [0.424:106] [millimeter] opening each output slit [1.57:293] [millimeter] divergence per channel is 9.78565 [min] Chopper delay = 3.36195, mod_period = 0.446429 [ms] Mean ToF [ms] = 80.8891 Selected energy range: 9.72702 to 67.6068 meV Chopper delay = 3.36195, mod_period = 0.446429 [ms] Mean ToF [ms] = 80.8891 Selected energy range: 9.72702 to 67.6068 meV [ESS_BEER_MCPL] Initialize Message(src): MCPL file (BEER_MR.mcpl) produced with SIMRES. Message(src): MCPL file (BEER_MR.mcpl) contains 10000 particles. OpenACC, preload implicit: Preload requested, loading MCPLfile in INITIALIZE Chopper delay = 3.36195, mod_period = 0.446429 [ms] Mean ToF [ms] = 80.8891 Selected energy range: 9.72702 to 67.6068 meV [ESS_BEER_MCPL] Initialize [ESS_BEER_MCPL] Initialize Message(src): MCPL file (BEER_MR.mcpl) produced with SIMRES. Message(src): MCPL file (BEER_MR.mcpl) contains 10000 particles. OpenACC, preload implicit: Preload requested, loading MCPLfile in INITIALIZE Message(src): MCPL file (BEER_MR.mcpl) produced with SIMRES. Message(src): MCPL file (BEER_MR.mcpl) contains 10000 particles. OpenACC, preload implicit: Preload requested, loading MCPLfile in INITIALIZE Initiating file read... Initiating file read... Initiating file read... Done reading MCPL file, found 10000 neutrons Warning: You are using MCPL_input with a repeat_count of 50: - Neutron count requested is 10000 x 50 <= 80000 neutrons total Done reading MCPL file, found 10000 neutrons Warning: You are using MCPL_input with a repeat_count of 50: - Neutron count requested is 10000 x 50 <= 80000 neutrons total Done reading MCPL file, found 10000 neutrons Warning: You are using MCPL_input with a repeat_count of 50: - Neutron count requested is 10000 x 50 <= 80000 neutrons total Chopper delay = 3.36195, mod_period = 0.446429 [ms] Mean ToF [ms] = 80.8891 Selected energy range: 9.72702 to 67.6068 meV [ESS_BEER_MCPL] Initialize Message(src): MCPL file (BEER_MR.mcpl) produced with SIMRES. Message(src): MCPL file (BEER_MR.mcpl) contains 10000 particles. OpenACC, preload implicit: Preload requested, loading MCPLfile in INITIALIZE Initiating file read... Done reading MCPL file, found 10000 neutrons Warning: You are using MCPL_input with a repeat_count of 50: - Neutron count requested is 10000 x 50 <= 80000 neutrons total WARNING(sample): p_transmit=0, adjusting to 0.01, to avoid algorithm instability WARNING(sample): p_transmit=0, adjusting to 0.01, to avoid algorithm instability WARNING(sample): p_transmit=0, adjusting to 0.01, to avoid algorithm instability PowderN: Target direction = (4.32978e-17 -0.707107 0.707107) Exact_radial_coll: rad2: foil thickness is 0.1 [millimeter] opening each input slit [0.424:106] [millimeter] opening each output slit [1.57:293] [millimeter] divergence per channel is 9.78565 [min] PowderN: Target direction = (4.32978e-17 -0.707107 0.707107) Exact_radial_coll: rad2: foil thickness is 0.1 [millimeter] opening each input slit [0.424:106] [millimeter] opening each output slit [1.57:293] [millimeter] divergence per channel is 9.78565 [min] PowderN: Target direction = (4.32978e-17 -0.707107 0.707107) Exact_radial_coll: rad2: foil thickness is 0.1 [millimeter] opening each input slit [0.424:106] [millimeter] opening each output slit [1.57:293] [millimeter] divergence per channel is 9.78565 [min] WARNING(sample): p_transmit=0, adjusting to 0.01, to avoid algorithm instability PowderN: Target direction = (4.32978e-17 -0.707107 0.707107) Exact_radial_coll: rad2: foil thickness is 0.1 [millimeter] opening each input slit [0.424:106] [millimeter] opening each output slit [1.57:293] [millimeter] divergence per channel is 9.78565 [min] Save [ESS_BEER_MCPL] Detector: xymon_I=305244 xymon_ERR=522.293 xymon_N=535192 "xymon.dat" Detector: lmon_I=305244 lmon_ERR=522.293 lmon_N=535192 "lmon.dat" Detector: hdiv_mon_I=305244 hdiv_mon_ERR=522.293 hdiv_mon_N=535192 "hdiv.dat" Detector: toflam_I=23793.3 toflam_ERR=113.983 toflam_N=54824 "toflam.dat" Detector: MonNDXZ_I=320.013 MonNDXZ_ERR=4.14876 MonNDXZ_N=15186 "SGV_xz.dat" Detector: MonNDX_I=320.013 MonNDX_ERR=4.14876 MonNDX_N=15186 "SGV_x.dat" Detector: MonNDY_I=320.013 MonNDY_ERR=4.14876 MonNDY_N=15186 "SGV_y.dat" Detector: MonNDZ_I=320.013 MonNDZ_ERR=4.14876 MonNDZ_N=15186 "SGV_z.dat" Detector: dhklmon_I=265.357 dhklmon_ERR=3.57658 dhklmon_N=14102 "dhkl.dat" Detector: psdtof_I=298.431 psdtof_ERR=4.00526 psdtof_N=14166 "tof_theta.dat" Finally [ESS_BEER_MCPL: 1]. Time: 1 [s] Detector: psdtofDetail_I=64.9888 psdtofDetail_ERR=2.22384 psdtofDetail_N=1540 "tof_theta_detail.dat" Finally [ESS_BEER_MCPL: 1]. Time: 1 [s] Message(src): You have used 9557 of 10000 neutrons available in the MCPL file. Message(src): You have used 9557 of 10000 neutrons available in the MCPL file. Finally [ESS_BEER_MCPL: 1]. Time: 1 [s] Message(src): You have used 9557 of 10000 neutrons available in the MCPL file. Warning (src): You requested 152912 neutrons from a file which contains 10000 particles in general, of which only 9557 are neutrons (within the wanted energy interval). Please examine the recorded intensities carefully. Warning (src): You requested 152912 neutrons from a file which contains 10000 particles in general, of which only 9557 are neutrons (within the wanted energy interval). Please examine the recorded intensities carefully. Warning (src): You requested 152912 neutrons from a file which contains 10000 particles in general, of which only 9557 are neutrons (within the wanted energy interval). Please examine the recorded intensities carefully. Warning (src): You requested 152912 neutrons from a file which contains 10000 particles in general, of which only 9557 are neutrons (within the wanted energy interval). Please examine the recorded intensities carefully. Finally [ESS_BEER_MCPL: 1]. Time: 1 [s] Message(src): You have used 9557 of 10000 neutrons available in the MCPL file. Finally [ESS_BEER_MCPL: 1]. Time: 1 [s] Message(src): You have used 9557 of 10000 neutrons available in the MCPL file. Warning (src): You requested 152912 neutrons from a file which contains 10000 particles in general, of which only 9557 are neutrons (within the wanted energy interval). Please examine the recorded intensities carefully. Finally [ESS_BEER_MCPL: 1]. Time: 1 [s] Message(src): You have used 9557 of 10000 neutrons available in the MCPL file. Warning (src): You requested 152912 neutrons from a file which contains 10000 particles in general, of which only 9557 are neutrons (within the wanted energy interval). Please examine the recorded intensities carefully. Finally [ESS_BEER_MCPL: 1]. Time: 1 [s] Message(src): You have used 9557 of 10000 neutrons available in the MCPL file. Warning (src): You requested 152912 neutrons from a file which contains 10000 particles in general, of which only 9557 are neutrons (within the wanted energy interval). Please examine the recorded intensities carefully. INFO: Placing instr file copy /home/nexmap/pkwi/TESTS/2022-11-01/McStas_8GPU_5e7/ESS_BEER_MCPL/ESS_BEER_MCPL.instr in dataset 1