loading system configuration
loading user configuration from /users/willend/.mcstas/3.x-dev/mccode_config.json
loading override configuration from /users/willend/McCode/tools/Python/mctest/../mccodelib/mcstas-test/McStas_DUAL_A100_DMSC/mccode_config.json
INFO: Using directory: "1"
INFO: Using existing c-file: ./Test_Pol_Bender_Vs_Guide_Curved.c
INFO: Using existing binary: ./Test_Pol_Bender_Vs_Guide_Curved.out
INFO: ===
--------------------------------------------------------------------------
WARNING: No preset parameters were found for the device that Open MPI
detected:

  Local host:            r6n22
  Device name:           mlx5_0
  Device vendor ID:      0x02c9
  Device vendor part ID: 4123

Default device parameters will be used, which may result in lower
performance.  You can edit any of the files specified by the
btl_openib_device_param_files MCA parameter to set values for your
device.

NOTE: You can turn off this warning by setting the MCA parameter
      btl_openib_warn_no_device_params_found to 0.
--------------------------------------------------------------------------
Simulation 'Test_Pol_Bender_Vs_Guide_Curved' (/users/willend/TESTS/2022-10-01/McStas_DUAL_A100_DMSC_5e7/Test_Pol_Bender_Vs_Guide_Curved/Test_Pol_Bender_Vs_Guide_Curved.instr): running on 2 nodes (master is 'r6n22.esss.dk', MPI version 3.1).
Have found 2 GPU devices on rank 0. Will use device 0.
Have found 2 GPU devices on rank 1. Will use device 1.
[Test_Pol_Bender_Vs_Guide_Curved] Initialize
[Test_Pol_Bender_Vs_Guide_Curved] Initialize
*** TRACE end *** 

Save [Test_Pol_Bender_Vs_Guide_Curved]
Detector: lamStart_I=0.125469 lamStart_ERR=1.7744e-05 lamStart_N=5e+07 "lambdaStart.dat"
Detector: psdStart_I=0.125469 psdStart_ERR=1.7744e-05 psdStart_N=5e+07 "psdStart.dat"
Detector: lamStopBender1_I=0.00205868 lamStopBender1_ERR=1.76806e-06 lamStopBender1_N=6.87396e+06 "lambdaStopBender1.dat"
Detector: psdBender1_I=0.00205868 psdBender1_ERR=1.76806e-06 psdBender1_N=6.87396e+06 "psdBender1.dat"
Detector: lamStopBender2_I=0.00205471 lamStopBender2_ERR=1.76589e-06 lamStopBender2_N=6.87083e+06 "lambdaStopBender2.dat"
Detector: psdBender2_I=0.00205471 psdBender2_ERR=1.76589e-06 psdBender2_N=6.87083e+06 "psdBender2.dat"
Detector: lamStopGuide_I=0.00220921 lamStopGuide_ERR=1.90719e-06 lamStopGuide_N=1.66591e+07 "lambdaStopGuide.dat"

Finally [Test_Pol_Bender_Vs_Guide_Curved: 1]. Time: 1 [s] 
Detector: psdGuide_I=0.00220917 psdGuide_ERR=1.90717e-06 psdGuide_N=1.66581e+07 "psdGuide.dat"

Finally [Test_Pol_Bender_Vs_Guide_Curved: 1]. Time: 1 [s] 
[r6n22.esss.dk:805239] 1 more process has sent help message help-mpi-btl-openib.txt / no device params found
[r6n22.esss.dk:805239] Set MCA parameter "orte_base_help_aggregate" to 0 to see all help / error messages
INFO: Placing instr file copy /users/willend/TESTS/2022-10-01/McStas_DUAL_A100_DMSC_5e7/Test_Pol_Bender_Vs_Guide_Curved/Test_Pol_Bender_Vs_Guide_Curved.instr in dataset 1