loading system configuration
loading user configuration from /users/willend/.mcstas/3.x-dev/mccode_config.json
loading override configuration from /users/willend/McCode/tools/Python/mctest/../mccodelib/mcstas-test/McStas_DUAL_A100_DMSC/mccode_config.json
INFO: Using directory: "1"
INFO: Using existing c-file: ./HZB_FLEX.c
INFO: Using existing binary: ./HZB_FLEX.out
INFO: ===
--------------------------------------------------------------------------
WARNING: No preset parameters were found for the device that Open MPI
detected:

  Local host:            r6n22
  Device name:           mlx5_0
  Device vendor ID:      0x02c9
  Device vendor part ID: 4123

Default device parameters will be used, which may result in lower
performance.  You can edit any of the files specified by the
btl_openib_device_param_files MCA parameter to set values for your
device.

NOTE: You can turn off this warning by setting the MCA parameter
      btl_openib_warn_no_device_params_found to 0.
--------------------------------------------------------------------------
Simulation 'HZB_FLEX' (/users/willend/TESTS/2022-10-01/McStas_DUAL_A100_DMSC_5e7/HZB_FLEX/HZB_FLEX.instr): running on 2 nodes (master is 'r6n22.esss.dk', MPI version 3.1).
Have found 2 GPU devices on rank 0. Will use device 0.
Have found 2 GPU devices on rank 1. Will use device 1.
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
[HZB_FLEX] Initialize
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
[HZB_FLEX] Initialize
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
*** TRACE end *** 

Save [HZB_FLEX]
Detector: Before_selec_I=2.97229e+07 Before_selec_ERR=19613 Before_selec_N=4.14319e+06 "PSD_monitor_before.dat"
Detector: After_selec_I=2.03711e+07 After_selec_ERR=16245.4 After_selec_N=2.42121e+06 "PSD_monitor_after.dat"
<E> : 4.98489 meV , E-width : 0.175249 meV 
Detector: energy_endguide_I=1.3265e+07 energy_endguide_ERR=12555 energy_endguide_N=1.64488e+06 "energy-endguide.dat"
<E> : 4.98048 meV , E-width : 0.235355 meV 
<E> : 4.99743 meV , E-width : -nan meV 
Detector: energy_mono_I=4.31996e+06 energy_mono_ERR=7167.33 energy_mono_N=531388 "energy-mono.dat"
<E> : 4.83777 meV , E-width : 0.82023 meV 
Detector: energy_pre_sample_I=3.65457e+06 energy_pre_sample_ERR=6679.8 energy_pre_sample_N=384808 "energy-pre-sample.dat"
<E> : 4.97903 meV , E-width : 0.0544789 meV 
<E> : 4.96831 meV , E-width : 0.244986 meV 
Detector: div_mono_I=4.0657e+06 div_mono_ERR=6994.18 div_mono_N=454009 "div-sample.dat"
Detector: div_mono_H_I=358792 div_mono_H_ERR=2063.68 div_mono_H_N=44502 "H-div-sample.dat"
Detector: psd_sam_I=4.33631e+06 psd_sam_ERR=7175.21 psd_sam_N=537414 "psd-sam.dat"
Detector: dpsd1_I=4.33631e+06 dpsd1_ERR=7175.21 dpsd1_N=537414 "linpsdsam.dat"

Finally [HZB_FLEX: 1]. Time: 2 [s] 

Finally [HZB_FLEX: 1]. Time: 2 [s] 
[r6n22.esss.dk:796250] 1 more process has sent help message help-mpi-btl-openib.txt / no device params found
[r6n22.esss.dk:796250] Set MCA parameter "orte_base_help_aggregate" to 0 to see all help / error messages
INFO: Placing instr file copy /users/willend/TESTS/2022-10-01/McStas_DUAL_A100_DMSC_5e7/HZB_FLEX/HZB_FLEX.instr in dataset 1