INFO: Using directory: "1"
INFO: Using existing c-file: ./Unit_test_conditional_standard.c
INFO: Using existing binary: ./Unit_test_conditional_standard.out
INFO: ===
Simulation 'Unit_test_conditional_standard' (Unit_test_conditional_standard.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1).
Instrument parameters for Unit_test_conditional_standard (Unit_test_conditional_standard.instr)
Opening input file '/u/data/pkwi/McStas/mcstas/3.x-dev/data/Cu2MnAl.laz' (Table_Read_Offset)
Table from file 'Cu2MnAl.laz' (block 1) is 43 x 6 (x=1:9), constant step. interpolation: linear
  '# TITLE  Al4 Cu8 Mn4 [Cubic, Centric (-1 at origin)];#        a         b   ...'
[Unit_test_conditional_standard] Initialize
Table from file 'Cu2MnAl.laz' (block 1) is 43 x 6 (x=1:9), constant step. interpolation: linear
  '# TITLE  Al4 Cu8 Mn4 [Cubic, Centric (-1 at origin)];#        a         b   ...'
[Unit_test_conditional_standard] Initialize
Table from file 'Cu2MnAl.laz' (block 1) is 43 x 6 (x=1:9), constant step. interpolation: linear
  '# TITLE  Al4 Cu8 Mn4 [Cubic, Centric (-1 at origin)];#        a         b   ...'
[Unit_test_conditional_standard] Initialize
Table from file 'Cu2MnAl.laz' (block 1) is 43 x 6 (x=1:9), constant step. interpolation: linear
  '# TITLE  Al4 Cu8 Mn4 [Cubic, Centric (-1 at origin)];#        a         b   ...'
[Unit_test_conditional_standard] Initialize
Table from file 'Cu2MnAl.laz' (block 1) is 43 x 6 (x=1:9), constant step. interpolation: linear
  '# TITLE  Al4 Cu8 Mn4 [Cubic, Centric (-1 at origin)];#        a         b   ...'
[Unit_test_conditional_standard] Initialize
Table from file 'Cu2MnAl.laz' (block 1) is 43 x 6 (x=1:9), constant step. interpolation: linear
  '# TITLE  Al4 Cu8 Mn4 [Cubic, Centric (-1 at origin)];#        a         b   ...'
[Unit_test_conditional_standard] Initialize
Table from file 'Cu2MnAl.laz' (block 1) is 43 x 6 (x=1:9), constant step. interpolation: linear
  '# TITLE  Al4 Cu8 Mn4 [Cubic, Centric (-1 at origin)];#        a         b   ...'
[Unit_test_conditional_standard] Initialize
Table from file 'Cu2MnAl.laz' (block 1) is 43 x 6 (x=1:9), constant step. interpolation: linear
  '# TITLE  Al4 Cu8 Mn4 [Cubic, Centric (-1 at origin)];#        a         b   ...'
[Unit_test_conditional_standard] Initialize
Table from file 'Cu2MnAl.laz' (block 1) is 43 x 6 (x=1:9), constant step. interpolation: linear
  '# TITLE  Al4 Cu8 Mn4 [Cubic, Centric (-1 at origin)];#        a         b   ...'
[Unit_test_conditional_standard] Initialize
Table from file 'Cu2MnAl.laz' (block 1) is 43 x 6 (x=1:9), constant step. interpolation: linear
  '# TITLE  Al4 Cu8 Mn4 [Cubic, Centric (-1 at origin)];#        a         b   ...'
[Unit_test_conditional_standard] Initialize
Table from file 'Cu2MnAl.laz' (block 1) is 43 x 6 (x=1:9), constant step. interpolation: linear
  '# TITLE  Al4 Cu8 Mn4 [Cubic, Centric (-1 at origin)];#        a         b   ...'
[Unit_test_conditional_standard] Initialize
Table from file 'Cu2MnAl.laz' (block 1) is 43 x 6 (x=1:9), constant step. interpolation: linear
  '# TITLE  Al4 Cu8 Mn4 [Cubic, Centric (-1 at origin)];#        a         b   ...'
PowderN: powder: Reading 43 rows from Cu2MnAl.laz
PowderN: powder: Powder file probably of type Crystallographica/Fullprof (lau)
WARNING: but F2 unit is set to barns=1 (barns). Intensity might be 100 times too high.
PowderN: powder: Read 43 reflections from file 'Cu2MnAl.laz'
PowderN: powder: Vc=197.493 [Angs] sigma_abs=84.364 [barn] sigma_inc=6.04349 [barn] reflections=Cu2MnAl.laz
[Unit_test_conditional_standard] Initialize
Table from file 'Cu2MnAl.laz' (block 1) is 43 x 6 (x=1:9), constant step. interpolation: linear
  '# TITLE  Al4 Cu8 Mn4 [Cubic, Centric (-1 at origin)];#        a         b   ...'
[Unit_test_conditional_standard] Initialize
Table from file 'Cu2MnAl.laz' (block 1) is 43 x 6 (x=1:9), constant step. interpolation: linear
  '# TITLE  Al4 Cu8 Mn4 [Cubic, Centric (-1 at origin)];#        a         b   ...'
[Unit_test_conditional_standard] Initialize
Table from file 'Cu2MnAl.laz' (block 1) is 43 x 6 (x=1:9), constant step. interpolation: linear
  '# TITLE  Al4 Cu8 Mn4 [Cubic, Centric (-1 at origin)];#        a         b   ...'
[Unit_test_conditional_standard] Initialize
Table from file 'Cu2MnAl.laz' (block 1) is 43 x 6 (x=1:9), constant step. interpolation: linear
  '# TITLE  Al4 Cu8 Mn4 [Cubic, Centric (-1 at origin)];#        a         b   ...'
[Unit_test_conditional_standard] Initialize
Table from file 'Cu2MnAl.laz' (block 1) is 43 x 6 (x=1:9), constant step. interpolation: linear
  '# TITLE  Al4 Cu8 Mn4 [Cubic, Centric (-1 at origin)];#        a         b   ...'
[Unit_test_conditional_standard] Initialize
Table from file 'Cu2MnAl.laz' (block 1) is 43 x 6 (x=1:9), constant step. interpolation: linear
  '# TITLE  Al4 Cu8 Mn4 [Cubic, Centric (-1 at origin)];#        a         b   ...'
[Unit_test_conditional_standard] Initialize
Table from file 'Cu2MnAl.laz' (block 1) is 43 x 6 (x=1:9), constant step. interpolation: linear
  '# TITLE  Al4 Cu8 Mn4 [Cubic, Centric (-1 at origin)];#        a         b   ...'
[Unit_test_conditional_standard] Initialize
Table from file 'Cu2MnAl.laz' (block 1) is 43 x 6 (x=1:9), constant step. interpolation: linear
  '# TITLE  Al4 Cu8 Mn4 [Cubic, Centric (-1 at origin)];#        a         b   ...'
[Unit_test_conditional_standard] Initialize
Union_master component master initialized sucessfully
*** TRACE end *** 

Save [Unit_test_conditional_standard]
Detector: Union_logger_2D_space_zx_I=5.66001e-09 Union_logger_2D_space_zx_ERR=1.20625e-12 Union_logger_2D_space_zx_N=4.42565e+07 "Union_logger_2D_space_zx.dat"
Detector: Union_logger_2D_space_zy_I=5.66001e-09 Union_logger_2D_space_zy_ERR=1.20625e-12 Union_logger_2D_space_zy_N=4.42565e+07 "Union_logger_2D_space_zy.dat"
Detector: Union_logger_2D_space_zx_con_I=3.00094e-10 Union_logger_2D_space_zx_con_ERR=2.76493e-13 Union_logger_2D_space_zx_con_N=4.63256e+06 "Union_logger_2D_space_zx_con.dat"
Detector: Union_logger_2D_space_zy_con_I=3.00094e-10 Union_logger_2D_space_zy_con_ERR=2.76493e-13 Union_logger_2D_space_zy_con_N=4.63256e+06 "Union_logger_2D_space_zy_con.dat"


Finally [Unit_test_conditional_standard: 1]. Time: 6 [s] 


Finally [Unit_test_conditional_standard: 1]. Time: 6 [s] 
Finally [Unit_test_conditional_standard: 1]. Time: 6 [s] 

Finally [Unit_test_conditional_standard: 1]. Time: 6 [s] 


Finally [Unit_test_conditional_standard: 1]. Time: 6 [s] 

Finally [Unit_test_conditional_standard: 1]. Time: 6 [s] 
Finally [Unit_test_conditional_standard: 1]. Time: 6 [s] 

Finally [Unit_test_conditional_standard: 1]. Time: 6 [s] 

Finally [Unit_test_conditional_standard: 1]. Time: 6 [s] 

Finally [Unit_test_conditional_standard: 1]. Time: 6 [s] 

Finally [Unit_test_conditional_standard: 1]. Time: 6 [s] 

Finally [Unit_test_conditional_standard: 1]. Time: 6 [s] 

Finally [Unit_test_conditional_standard: 1]. Time: 6 [s] 

Detector: transmission_I=5.34135e-12 transmission_ERR=3.62023e-14 transmission_N=22676 "PSD.dat"

Finally [Unit_test_conditional_standard: 1]. Time: 6 [s] 


Finally [Unit_test_conditional_standard: 1]. Time: 6 [s] 
Finally [Unit_test_conditional_standard: 1]. Time: 6 [s] 
Finally [Unit_test_conditional_standard: 1]. Time: 6 [s] 
Finally [Unit_test_conditional_standard: 1]. Time: 6 [s] 

Finally [Unit_test_conditional_standard: 1]. Time: 6 [s] 

Finally [Unit_test_conditional_standard: 1]. Time: 7 [s] 
INFO: Placing instr file copy Unit_test_conditional_standard.instr in dataset 1
INFO: Placing generated c-code copy Unit_test_conditional_standard.c in dataset 1