INFO: Using directory: "1" INFO: Using existing c-file: ./ILL_IN4.c INFO: Using existing binary: ./ILL_IN4.out INFO: === Simulation 'ILL_IN4' (ILL_IN4.instr): running on 20 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1). ILL_IN4: Thermal ToF spectrometer Divergence at the lead shutter: dX =2.2026 [deg] Take-off at monochromator: A1 =-20.964 [deg] ; DM=1.677 [Angs] Incident energy: Ei =56.8085 [meV] ; Ki=5.23599 [Angs-1] Incident velocity: Vi =3296.7 [m/s] Source-Mono distance: LRM =10.2086 [m] Virtual Source-Mono distance: d0 =3.52555 [m] Mono-Sample distance: LMS =1.94553 [m] (d1) Curvature at monochromator: RMH =-7.00816 [m] ; RMV=-1.9 [m] Fermi Chopper Frequency: nu =335.376 [Hz] ; rpm=20122.6 [rpm] BC2 phase wrt BC1: PhiBC2=-22.5 [deg] L12=2.45746 [m] delay t12=0.000745432 [s] (BCTR) FC phase wrt BC1: PhiFC =-196.999 [deg] L1F=5.37909 [m] delay t1F=0.00163166 [s] Distances: in [m] [H12] 6.1 [BC1] 0.583 [VS] 1.87446 [BC2] 1.65109 [PG] 1.27053 [FC] 0.675 [Spl] 2 [Det] ILL_IN4: WARNING: The choppers are NOT in closed position phase12=-22.5 [deg]. [ILL_IN4] Initialize ILL_IN4: WARNING: The choppers are NOT in closed position phase12=-22.5 [deg]. [ILL_IN4] Initialize ILL_IN4: WARNING: The choppers are NOT in closed position phase12=-22.5 [deg]. [ILL_IN4] Initialize ILL_IN4: WARNING: The choppers are NOT in closed position phase12=-22.5 [deg]. [ILL_IN4] Initialize ILL_IN4: WARNING: The choppers are NOT in closed position phase12=-22.5 [deg]. [ILL_IN4] Initialize ILL_IN4: WARNING: The choppers are NOT in closed position phase12=-22.5 [deg]. [ILL_IN4] Initialize ILL_IN4: WARNING: The choppers are NOT in closed position phase12=-22.5 [deg]. [ILL_IN4] Initialize ILL_IN4: WARNING: The choppers are NOT in closed position phase12=-22.5 [deg]. [ILL_IN4] Initialize ILL_IN4: WARNING: The choppers are NOT in closed position phase12=-22.5 [deg]. [ILL_IN4] Initialize ILL_IN4: WARNING: The choppers are NOT in closed position phase12=-22.5 [deg]. [ILL_IN4] Initialize ILL_IN4: WARNING: The choppers are NOT in closed position phase12=-22.5 [deg]. [ILL_IN4] Initialize ILL_IN4: WARNING: The choppers are NOT in closed position phase12=-22.5 [deg]. ILL_IN4: WARNING: The choppers are NOT in closed position phase12=-22.5 [deg]. ILL_IN4: WARNING: The choppers are NOT in closed position phase12=-22.5 [deg]. ILL_IN4: WARNING: The choppers are NOT in closed position phase12=-22.5 [deg]. ILL_IN4: WARNING: The choppers are NOT in closed position phase12=-22.5 [deg]. ILL_IN4: WARNING: The choppers are NOT in closed position phase12=-22.5 [deg]. [ILL_IN4] Initialize [ILL_IN4] Initialize [ILL_IN4] Initialize [ILL_IN4] Initialize [ILL_IN4] Initialize [ILL_IN4] Initialize ILL_IN4: WARNING: The choppers are NOT in closed position phase12=-22.5 [deg]. ILL_IN4: WARNING: The choppers are NOT in closed position phase12=-22.5 [deg]. [ILL_IN4] Initialize [ILL_IN4] Initialize Warning: Read_Table :Dirac2D.sqw Data has 40859 values that should be 41 x 859 Warning: Read_Table :Dirac2D.sqw Data has 40859 values that should be 41 x 859 Warning: Read_Table :Dirac2D.sqw Data has 2047 values that should be 3 x 906 Warning: Read_Table :Dirac2D.sqw Data has 42906 values that should be 43 x 906 Warning: Read_Table :Dirac2D.sqw Data has 44953 values that should be 45 x 953 Warning: Read_Table :Dirac2D.sqw Data has 2047 values that should be 3 x 1000 Warning: Read_Table :Dirac2D.sqw Data has 4094 values that should be 5 x 94 Warning: Read_Table :Dirac2D.sqw Data has 57235 values that should be 58 x 235 Warning: Read_Table :Dirac2D.sqw Data has 57235 values that should be 58 x 235 Warning: Read_Table :Dirac2D.sqw Data has 2047 values that should be 3 x 282 Warning: Read_Table :Dirac2D.sqw Data has 59282 values that should be 60 x 282 Warning: Read_Table :Dirac2D.sqw Data has 59282 values that should be 60 x 282 Warning: Read_Table :Dirac2D.sqw Data has 2047 values that should be 3 x 329 Warning: Read_Table :Dirac2D.sqw Data has 61329 values that should be 62 x 329 Warning: Read_Table :Dirac2D.sqw Data has 4094 values that should be 5 x 329 Warning: Read_Table :Dirac2D.sqw Data has 2047 values that should be 3 x 376 Warning: Read_Table :Dirac2D.sqw Data has 63376 values that should be 64 x 376 Warning: Read_Table :Dirac2D.sqw Data has 63376 values that should be 64 x 376 Warning: Read_Table :Dirac2D.sqw Data has 63376 values that should be 64 x 376 Warning: Read_Table :Dirac2D.sqw Data has 8188 values that should be 9 x 470 Warning: Read_Table :Dirac2D.sqw Data has 67470 values that should be 68 x 470 Warning: Read_Table :Dirac2D.sqw Data has 67470 values that should be 68 x 470 Warning: Read_Table :Dirac2D.sqw Data has 69517 values that should be 70 x 517 Warning: Read_Table :Dirac2D.sqw Data has 2047 values that should be 3 x 517 Warning: Read_Table :Dirac2D.sqw Data has 2047 values that should be 3 x 564 Warning: Read_Table :Dirac2D.sqw Data has 73611 values that should be 74 x 611 Warning: Read_Table :Dirac2D.sqw Data has 75658 values that should be 76 x 658 Warning: Read_Table :Dirac2D.sqw Data has 8188 values that should be 9 x 846 Warning: Read_Table :Dirac2D.sqw Data has 18422 values that should be 20 x 268 Warning: Read_Table :Dirac2D.sqw Data has 12282 values that should be 13 x 550 Generate 100 Dirac peaks on (q,w) grid. ILL_IN4: WARNING: The choppers are NOT in closed position phase12=-22.5 [deg]. [ILL_IN4] Initialize Source_gen: component Thermal (square 0.1 x 0.1) focusing distance dist=5.2 area=0.1 x 0.1 spectra 1.100 to 1.300 AA (48.408 to 67.612 meV) T1=683.7 K (1.178 AA), T2=257.7 K (1.919 AA), T3=16.7 K (7.539 AA) Flux is dPhi/dlambda in [n/s/cm2]. Source_gen: component Thermal2 (square 0.1 x 0.1) focusing distance dist=5.2 area=0.1 x 0.1 spectra 0.500 to 0.700 AA (166.959 to 327.240 meV) T1=683.7 K (1.178 AA), T2=257.7 K (1.919 AA), T3=16.7 K (7.539 AA) Flux is dPhi/dlambda in [n/s/cm2]. Source_gen: component Thermal3 (square 0.1 x 0.1) focusing distance dist=5.2 area=0.1 x 0.1 spectra 0.300 to 0.500 AA (327.240 to 909.000 meV) T1=683.7 K (1.178 AA), T2=257.7 K (1.919 AA), T3=16.7 K (7.539 AA) Flux is dPhi/dlambda in [n/s/cm2]. Source_gen: component Thermal4 (square 0.1 x 0.1) focusing distance dist=5.2 area=0.1 x 0.1 spectra 0.200 to 0.400 AA (511.312 to 2045.250 meV) T1=683.7 K (1.178 AA), T2=257.7 K (1.919 AA), T3=16.7 K (7.539 AA) Flux is dPhi/dlambda in [n/s/cm2]. Opening input file '/u/data/pkwi/McStas/mcstas/3.x-dev/data/Al2O3_sapphire.trm' (Table_Read_Offset) Opening input file '/u/data/pkwi/McStas/mcstas/3.x-dev/data/HOPG.rfl' (Table_Read_Offset) Opening input file '/u/data/pkwi/McStas/mcstas/3.x-dev/data/HOPG.trm' (Table_Read_Offset) Opening input file '/u/data/pkwi/McStas/mcstas/3.x-dev/data/Al.laz' (Table_Read_Offset) Opening input file '/u/data/pkwi/McStas/mcstas/3.x-dev/data/Al.laz' (Table_Read_Offset) Opening input file '/u/data/pkwi/McStas/mcstas/3.x-dev/data/V.laz' (Table_Read_Offset) Opening input file '/u/data/pkwi/McStas/mcstas/3.x-dev/data/V.laz' (Table_Read_Offset) Isotropic_Sqw: SampleS: is a box: width=0.050000 height=0.050000 depth=0.001000 Opening input file 'Dirac2D.sqw' (Table_Read_Offset) Opening input file 'Dirac2D.sqw' (Table_Read_Offset) Opening input file 'Dirac2D.sqw' (Table_Read_Offset) Opening input file 'Dirac2D.sqw' (Table_Read_Offset) Isotropic_Sqw: SampleS: Computing scattering unit density V_rho=0.602214 [AA^-3] from density=1 [g/cm^3] weight=1 [g/mol]. Isotropic_Sqw: SampleS: S(q,w) data from Dirac2D.sqw (coh) assumed to be classical (symmetrised in energy). Isotropic_Sqw: SampleS: Generated Dirac2D.sqw coherent Sqw q=[0:15.6923 Angs-1] w=[0:283.758 meV] |S|=0.284838 size=[1000x1999] sigma=1 [barns] normalization factor S(q,w)*21.4141 (auto) \int q^2 S(q) dq=59.5952 # McStas 3.x-dev - Dec. 11, 2025: [pid 2792220] Signal 11 detected [proc 19] SIGSEGV (Mem Error) # Simulation: ILL_IN4 (ILL_IN4.instr) # Breakpoint: [_Environment_in_init] component Environment_in=Isotropic_Sqw() INITIALISE [Isotropic_Sqw:0] 0.00 % ( 0.0/10000000.0) # Date: Fri Dec 12 06:31:51 2025 # Started: Fri Dec 12 06:31:48 2025 # Last I/O Error: No such file or directory # McStas 3.x-dev - Dec. 11, 2025: Simulation stop (abort). # McStas 3.x-dev - Dec. 11, 2025: [pid 2792191] Signal 11 detected [proc 11] SIGSEGV (Mem Error) # Simulation: ILL_IN4 (ILL_IN4.instr) # Breakpoint: [_Environment_in_init] component Environment_in=Isotropic_Sqw() INITIALISE [Isotropic_Sqw:0] 0.00 % ( 0.0/10000000.0) # Date: Fri Dec 12 06:31:51 2025 # Started: Fri Dec 12 06:31:48 2025 # Last I/O Error: No such file or directory # McStas 3.x-dev - Dec. 11, 2025: Simulation stop (abort). -------------------------------------------------------------------------- Primary job terminated normally, but 1 process returned a non-zero exit code. Per user-direction, the job has been aborted. -------------------------------------------------------------------------- # McStas 3.x-dev - Dec. 11, 2025: [pid 2792169] Signal 15 detected [proc 3] SIGTERM (Termination) # Simulation: ILL_IN4 (ILL_IN4.instr) # Breakpoint: [_VS_trace] component VS=Slit() TRACE [Slit:0] 0.00 % ( 0.0/ 500000.0) # Date: Fri Dec 12 06:31:52 2025 # Started: Fri Dec 12 06:31:48 2025 # McStas 3.x-dev - Dec. 11, 2025: Finishing simulation (save results and exit) # McStas 3.x-dev - Dec. 11, 2025: [pid 2792168] Signal 15 detected [proc 2] SIGTERM (Termination) # Simulation: ILL_IN4 (ILL_IN4.instr) # Breakpoint: [_Environment_in_init] component Environment_in=Isotropic_Sqw() INITIALISE [Isotropic_Sqw:0] 0.00 % ( 0.0/10000000.0) # Date: Fri Dec 12 06:31:52 2025 # Started: Fri Dec 12 06:31:48 2025 # McStas 3.x-dev - Dec. 11, 2025: Finishing simulation (save results and exit) # McStas 3.x-dev - Dec. 11, 2025: [pid 2792170] Signal 15 detected [proc 4] SIGTERM (Termination) # Simulation: ILL_IN4 (ILL_IN4.instr) # Breakpoint: [_Environment_in_init] component Environment_in=Isotropic_Sqw() INITIALISE [Isotropic_Sqw:0] 0.00 % ( 0.0/10000000.0) # Date: Fri Dec 12 06:31:52 2025 # Started: Fri Dec 12 06:31:48 2025 # McStas 3.x-dev - Dec. 11, 2025: Finishing simulation (save results and exit) # McStas 3.x-dev - Dec. 11, 2025: [pid 2792166] Signal 15 detected [proc 0] SIGTERM (Termination) # Simulation: ILL_IN4 (ILL_IN4.instr) # Breakpoint: [_Environment_in_init] component Environment_in=Isotropic_Sqw() INITIALISE [Isotropic_Sqw:0] 0.00 % ( 0.0/10000000.0) # Date: Fri Dec 12 06:31:52 2025 # Started: Fri Dec 12 06:31:48 2025 # McStas 3.x-dev - Dec. 11, 2025: Finishing simulation (save results and exit) Save [ILL_IN4] # McStas 3.x-dev - Dec. 11, 2025: [pid 2792175] Signal 15 detected [proc 5] SIGTERM (Termination) # Simulation: ILL_IN4 (ILL_IN4.instr) # Breakpoint: [_Mono_trace] component Mono=Monochromator_curved() TRACE [Monochromator_curved:0] 0.00 % ( 0.0/ 500000.0) # Date: Fri Dec 12 06:31:52 2025 # Started: Fri Dec 12 06:31:48 2025 # McStas 3.x-dev - Dec. 11, 2025: Finishing simulation (save results and exit) # McStas 3.x-dev - Dec. 11, 2025: [pid 2792187] Signal 15 detected [proc 9] SIGTERM (Termination) # Simulation: ILL_IN4 (ILL_IN4.instr) # Breakpoint: [_Mono_trace] component Mono=Monochromator_curved() TRACE [Monochromator_curved:0] 0.00 % ( 0.0/ 500000.0) # Date: Fri Dec 12 06:31:52 2025 # Started: Fri Dec 12 06:31:48 2025 # McStas 3.x-dev - Dec. 11, 2025: Finishing simulation (save results and exit) # McStas 3.x-dev - Dec. 11, 2025: [pid 2792176] Signal 15 detected [proc 6] SIGTERM (Termination) # Simulation: ILL_IN4 (ILL_IN4.instr) # Breakpoint: [_Environment_in_init] component Environment_in=Isotropic_Sqw() INITIALISE [Isotropic_Sqw:0] 0.00 % ( 0.0/10000000.0) # Date: Fri Dec 12 06:31:52 2025 # Started: Fri Dec 12 06:31:48 2025 # McStas 3.x-dev - Dec. 11, 2025: Finishing simulation (save results and exit) # McStas 3.x-dev - Dec. 11, 2025: [pid 2792196] Signal 15 detected [proc 14] SIGTERM (Termination) # Simulation: ILL_IN4 (ILL_IN4.instr) # Breakpoint: [_Environment_in_init] component Environment_in=Isotropic_Sqw() INITIALISE [Isotropic_Sqw:0] 0.00 % ( 0.0/10000000.0) # Date: Fri Dec 12 06:31:52 2025 # Started: Fri Dec 12 06:31:48 2025 # McStas 3.x-dev - Dec. 11, 2025: Finishing simulation (save results and exit) # McStas 3.x-dev - Dec. 11, 2025: [pid 2792188] Signal 15 detected [proc 10] SIGTERM (Termination) # Simulation: ILL_IN4 (ILL_IN4.instr) # Breakpoint: [_Environment_in_init] component Environment_in=Isotropic_Sqw() INITIALISE [Isotropic_Sqw:0] 0.00 % ( 0.0/10000000.0) # Date: Fri Dec 12 06:31:52 2025 # Started: Fri Dec 12 06:31:48 2025 # McStas 3.x-dev - Dec. 11, 2025: Finishing simulation (save results and exit) # McStas 3.x-dev - Dec. 11, 2025: [pid 2792208] Signal 15 detected [proc 18] SIGTERM (Termination) # Simulation: ILL_IN4 (ILL_IN4.instr) # Breakpoint: [_Environment_in_init] component Environment_in=Isotropic_Sqw() INITIALISE [Isotropic_Sqw:0] 0.00 % ( 0.0/10000000.0) # Date: Fri Dec 12 06:31:52 2025 # Started: Fri Dec 12 06:31:48 2025 # McStas 3.x-dev - Dec. 11, 2025: Finishing simulation (save results and exit) # McStas 3.x-dev - Dec. 11, 2025: [pid 2792181] Signal 15 detected [proc 7] SIGTERM (Termination) # Simulation: ILL_IN4 (ILL_IN4.instr) # Breakpoint: [_Thermal_trace] component Thermal=Source_gen() TRACE [Source_gen:0] 0.00 % ( 0.0/ 500000.0) # Date: Fri Dec 12 06:31:52 2025 # Started: Fri Dec 12 06:31:48 2025 # McStas 3.x-dev - Dec. 11, 2025: Finishing simulation (save results and exit) # McStas 3.x-dev - Dec. 11, 2025: [pid 2792193] Signal 15 detected [proc 12] SIGTERM (Termination) # Simulation: ILL_IN4 (ILL_IN4.instr) # Breakpoint: [_Environment_in_init] component Environment_in=Isotropic_Sqw() INITIALISE [Isotropic_Sqw:0] 0.00 % ( 0.0/10000000.0) # Date: Fri Dec 12 06:31:52 2025 # Started: Fri Dec 12 06:31:48 2025 # McStas 3.x-dev - Dec. 11, 2025: Finishing simulation (save results and exit) # McStas 3.x-dev - Dec. 11, 2025: [pid 2792182] Signal 15 detected [proc 8] SIGTERM (Termination) # Simulation: ILL_IN4 (ILL_IN4.instr) # Breakpoint: [_Environment_in_init] component Environment_in=Isotropic_Sqw() INITIALISE [Isotropic_Sqw:0] 0.00 % ( 0.0/10000000.0) # Date: Fri Dec 12 06:31:52 2025 # Started: Fri Dec 12 06:31:48 2025 # McStas 3.x-dev - Dec. 11, 2025: Finishing simulation (save results and exit) # McStas 3.x-dev - Dec. 11, 2025: [pid 2792195] Signal 15 detected [proc 13] SIGTERM (Termination) # Simulation: ILL_IN4 (ILL_IN4.instr) # Breakpoint: [_Obt1_trace] component Obt1=Monitor_nD() TRACE [Monitor_nD:0] 0.00 % ( 0.0/ 500000.0) # Date: Fri Dec 12 06:31:52 2025 # Started: Fri Dec 12 06:31:48 2025 # McStas 3.x-dev - Dec. 11, 2025: Finishing simulation (save results and exit) # McStas 3.x-dev - Dec. 11, 2025: [pid 2792200] Signal 15 detected [proc 15] SIGTERM (Termination) # Simulation: ILL_IN4 (ILL_IN4.instr) # Breakpoint: [_VS_trace] component VS=Slit() TRACE [Slit:0] 0.00 % ( 0.0/ 500000.0) # Date: Fri Dec 12 06:31:52 2025 # Started: Fri Dec 12 06:31:48 2025 # McStas 3.x-dev - Dec. 11, 2025: Finishing simulation (save results and exit) # McStas 3.x-dev - Dec. 11, 2025: [pid 2792203] Signal 15 detected [proc 16] SIGTERM (Termination) # Simulation: ILL_IN4 (ILL_IN4.instr) # Breakpoint: [_Environment_in_init] component Environment_in=Isotropic_Sqw() INITIALISE [Isotropic_Sqw:0] 0.00 % ( 0.0/10000000.0) # Date: Fri Dec 12 06:31:52 2025 # Started: Fri Dec 12 06:31:48 2025 # McStas 3.x-dev - Dec. 11, 2025: Finishing simulation (save results and exit) # McStas 3.x-dev - Dec. 11, 2025: [pid 2792167] Signal 15 detected [proc 1] SIGTERM (Termination) # Simulation: ILL_IN4 (ILL_IN4.instr) # Breakpoint: [_Fermi_trace] component Fermi=FermiChopper() TRACE [FermiChopper:0] 0.00 % ( 0.0/ 500000.0) # Date: Fri Dec 12 06:31:52 2025 # Started: Fri Dec 12 06:31:48 2025 # McStas 3.x-dev - Dec. 11, 2025: Finishing simulation (save results and exit) # McStas 3.x-dev - Dec. 11, 2025: [pid 2792205] Signal 15 detected [proc 17] SIGTERM (Termination) # Simulation: ILL_IN4 (ILL_IN4.instr) # Breakpoint: [_Mono_trace] component Mono=Monochromator_curved() TRACE [Monochromator_curved:0] 0.00 % ( 0.0/ 500000.0) # Date: Fri Dec 12 06:31:52 2025 # Started: Fri Dec 12 06:31:48 2025 # McStas 3.x-dev - Dec. 11, 2025: Finishing simulation (save results and exit) -------------------------------------------------------------------------- mpirun noticed that process rank 11 with PID 0 on node hypatia exited on signal 3 (Quit). -------------------------------------------------------------------------- INFO: call to mpirun failed with Command 'mpirun -np 20 ./ILL_IN4.out --trace=0 --seed=1000 --ncount=10000000.0 --dir=1 --format=McCode --bufsiz=10000000 lambda=1.2 DM=1.677' returned non-zero exit status 131. Traceback (most recent call last): File "/u/data/pkwi/McStas/mcstas/3.x-dev/tools/Python/mcrun/mcrun.py", line 648, in main() File "/u/data/pkwi/McStas/mcstas/3.x-dev/tools/Python/mcrun/mcrun.py", line 620, in main mcstas.run() # in mccode.py File "/u/data/pkwi/McStas/mcstas/3.x-dev/tools/Python/mcrun/mccode.py", line 397, in run return self.runMPI(args, pipe, override_mpi) File "/u/data/pkwi/McStas/mcstas/3.x-dev/tools/Python/mcrun/mccode.py", line 451, in runMPI return Process(binpath).run(args, pipe=pipe) File "/u/data/pkwi/McStas/mcstas/3.x-dev/tools/Python/mcrun/mccode.py", line 77, in run raise err File "/u/data/pkwi/McStas/mcstas/3.x-dev/tools/Python/mcrun/mccode.py", line 73, in run proc = run(command, shell=True, check=True, text=True, capture_output=pipe) File "/u/data/pkwi/McStas/mcstas/3.x-dev/miniconda3/lib/python3.10/subprocess.py", line 526, in run raise CalledProcessError(retcode, process.args, subprocess.CalledProcessError: Command 'mpirun -np 20 ./ILL_IN4.out --trace=0 --seed=1000 --ncount=10000000.0 --dir=1 --format=McCode --bufsiz=10000000 lambda=1.2 DM=1.677' returned non-zero exit status 131.