INFO: Using directory: "4"
INFO: Using existing c-file: ./Test_Sources.c
INFO: Using existing binary: ./Test_Sources.out
INFO: ===
--------------------------------------------------------------------------
WARNING: Linux kernel CMA support was requested via the
btl_vader_single_copy_mechanism MCA variable, but CMA support is
not available due to restrictive ptrace settings.

The vader shared memory BTL will fall back on another single-copy
mechanism if one is available. This may result in lower performance.

  Local host: runnervm6qbrg
--------------------------------------------------------------------------
Simulation 'Test_Sources' (Test_Sources.instr): running on 2 nodes (master is 'runnervm6qbrg', MPI version 3.1).
Test_Sources: Using Source_gen
Studied wavelength range is [1 11] AA
Test_Sources: Using Source_gen
[Test_Sources] Initialize
Source_gen: component sa5 (square 0.01 x 0.01)
            focusing distance dist=1 area=0.1 x 0.1
Studied wavelength range is [1 11] AA
            spectra 1.000 to 11.000 AA (0.676 to 81.810 meV)
            T1=216.8 K (2.093 AA), T2=33.9 K (5.292 AA), T3=16.7 K (7.539 AA)
  Flux is dPhi/dlambda in [n/s/cm2].
sa7: Setting up for sector W, beamline 8, global orientation angle is 108.7, internal angle 15
sa7: Focusing at rectagle sized 0.1 x 0.1 
  - positioned at location (x,y,z)=(0 m, 0 m, 1 m) 
 ( from dist parameter -> distance 1 )
sa7: Cold and Thermal brilliance performance multiplicators are c_performance=1 and t_performance=1
sa7: NOT using time focusing
[Test_Sources] Initialize
sa7: Setting up for sector W, beamline 8, global orientation angle is 108.7, internal angle 15
sa7: Focusing at rectagle sized 0.1 x 0.1 
  - positioned at location (x,y,z)=(0 m, 0 m, 1 m) 
 ( from dist parameter -> distance 1 )
sa7: Cold and Thermal brilliance performance multiplicators are c_performance=1 and t_performance=1
sa7: NOT using time focusing
*** TRACE end *** 
Storing event logfile -->  4/Events_1.log

Save [Test_Sources]
Storing event logfile -->  4/Events_0.log
Done storing logfile.
Done storing logfile.
Detector: m1_I=2.4256e+11 m1_ERR=3.40921e+08 m1_N=1e+06 "m1_1765513176.L"
Detector: m2_I=2.4256e+11 m2_ERR=3.40921e+08 m2_N=1e+06 "m2_1765513176.x_y"
Detector: m3_I=2.4256e+11 m3_ERR=3.40921e+08 m3_N=1e+06 "m3_1765513176.hd_vd"

Finally [Test_Sources: 4]. Time: 0 [s] 

Finally [Test_Sources: 4]. Time: 0 [s] 
[runnervm6qbrg:20868] 1 more process has sent help message help-btl-vader.txt / cma-permission-denied
[runnervm6qbrg:20868] Set MCA parameter "orte_base_help_aggregate" to 0 to see all help / error messages
INFO: Placing instr file copy Test_Sources.instr in dataset 4
INFO: Placing generated c-code copy Test_Sources.c in dataset 4