INFO: Using directory: "1"
INFO: Using existing c-file: ./HZB_FLEX.c
INFO: Using existing binary: ./HZB_FLEX.out
INFO: ===
--------------------------------------------------------------------------
WARNING: Linux kernel CMA support was requested via the
btl_vader_single_copy_mechanism MCA variable, but CMA support is
not available due to restrictive ptrace settings.

The vader shared memory BTL will fall back on another single-copy
mechanism if one is available. This may result in lower performance.

  Local host: runnervm6qbrg
--------------------------------------------------------------------------
Simulation 'HZB_FLEX' (HZB_FLEX.instr): running on 2 nodes (master is 'runnervm6qbrg', MPI version 3.1).
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
[HZB_FLEX] Initialize
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
[HZB_FLEX] Initialize
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
*** TRACE end *** 

Save [HZB_FLEX]
Detector: Before_selec_I=2.97496e+07 Before_selec_ERR=138774 Before_selec_N=82978 "PSD_monitor_before.dat"
Detector: After_selec_I=2.03423e+07 After_selec_ERR=114771 After_selec_N=48345 "PSD_monitor_after.dat"
<E> : 4.98578 meV , E-width : 0.135992 meV 
Detector: energy_endguide_I=1.32343e+07 energy_endguide_ERR=88612.7 energy_endguide_N=32798 "energy-endguide.dat"
<E> : 4.98473 meV , E-width : 0.13636 meV 
<E> : 4.97946 meV , E-width : 0.0823831 meV 
Detector: energy_mono_I=4.2479e+06 energy_mono_ERR=50171.8 energy_mono_N=10470 "energy-mono.dat"
<E> : 4.98212 meV , E-width : 0.0837516 meV 
<E> : 4.97816 meV , E-width : 0.0699093 meV 
Detector: energy_pre_sample_I=3.56936e+06 energy_pre_sample_ERR=46620.6 energy_pre_sample_N=7562 "energy-pre-sample.dat"
<E> : 4.98182 meV , E-width : 0.0698858 meV 
Detector: div_mono_I=3.97499e+06 div_mono_ERR=48831.9 div_mono_N=8917 "div-sample.dat"
Detector: div_mono_H_I=327437 div_mono_H_ERR=13955.7 div_mono_H_N=817 "H-div-sample.dat"
Detector: psd_sam_I=4.26569e+06 psd_sam_ERR=50235 psd_sam_N=10599 "psd-sam.dat"

Finally [HZB_FLEX: 1]. Time: 1 [s] 
Detector: dpsd1_I=4.26569e+06 dpsd1_ERR=50235 dpsd1_N=10599 "linpsdsam.dat"

Finally [HZB_FLEX: 1]. Time: 1 [s] 
[runnervm6qbrg:15069] 1 more process has sent help message help-btl-vader.txt / cma-permission-denied
[runnervm6qbrg:15069] Set MCA parameter "orte_base_help_aggregate" to 0 to see all help / error messages
INFO: Placing instr file copy HZB_FLEX.instr in dataset 1
INFO: Placing generated c-code copy HZB_FLEX.c in dataset 1