INFO: Using directory: "1" INFO: Using existing c-file: ./ILL_IN6.c INFO: Using existing binary: ./ILL_IN6.out INFO: === -------------------------------------------------------------------------- WARNING: Linux kernel CMA support was requested via the btl_vader_single_copy_mechanism MCA variable, but CMA support is not available due to restrictive ptrace settings. The vader shared memory BTL will fall back on another single-copy mechanism if one is available. This may result in lower performance. Local host: runnervm6qbrg -------------------------------------------------------------------------- Simulation 'ILL_IN6' (ILL_IN6.instr): running on 2 nodes (master is 'runnervm6qbrg', MPI version 3.1). Instrument Simulation ILL_IN6 (ILL_IN6.instr) using computed monochromator take-off angles: 75.4011 76.1933 76.9908 [deg] Wavelength [AA] 4.14 Neutron velocity [m/s] 955.564 Monochr. Bragg angle [deg] 38.0966 Incident Energy [meV] 4.77282 Focusing Energy transfer[meV] 0 Travel time: Supp./Fermi [us] 209.301 Travel time: Supp./Det. [us] 3294.39 TOF Delay [us] 282.75 TOF Dead Time [us] 2.37202 TOF Period (1 cycle) [us] 6034.37 TOF Channel width [us] 47.125 CHOP Fermi Phase [deg] -6.24325 CHOP Suppressor Phase [deg] 0 CHOP Fermi Speed [rpm] 4971.52 CHOP Suppressor Speed [rpm] 4971.52 Number of time channels 128 Current Elastic Peak Ch. 64 Elast. peak ch. for 0-delay 70 Time window: min=0.56114 max=6.59314 delay=0.28275 tof-width=6.032 [ms] Instrument Simulation ILL_IN6 (ILL_IN6.instr) using computed monochromator take-off angles: 75.4011 76.1933 76.9908 [deg] Wavelength [AA] 4.14 Neutron velocity [m/s] 955.564 Monochr. Bragg angle [deg] 38.0966 Incident Energy [meV] 4.77282 Focusing Energy transfer[meV] 0 Travel time: Supp./Fermi [us] 209.301 Travel time: Supp./Det. [us] 3294.39 TOF Delay [us] 282.75 TOF Dead Time [us] 2.37202 TOF Period (1 cycle) [us] 6034.37 [ILL_IN6] Initialize TOF Channel width [us] 47.125 CHOP Fermi Phase [deg] -6.24325 CHOP Suppressor Phase [deg] 0 CHOP Fermi Speed [rpm] 4971.52 CHOP Suppressor Speed [rpm] 4971.52 Number of time channels 128 Current Elastic Peak Ch. 64 Elast. peak ch. for 0-delay 70 Time window: min=0.56114 max=6.59314 delay=0.28275 tof-width=6.032 [ms] [ILL_IN6] Initialize Source_gen: component VCS (square 0.03 x 0.2) focusing distance dist=2.55 area=0.03 x 0.2 spectra 4.065 to 4.215 AA (4.605 to 4.951 meV) T1=216.8 K (2.093 AA), T2=33.9 K (5.292 AA), T3=16.7 K (7.539 AA) Flux is dPhi/dlambda in [n/s/cm2]. Opening input file '/usr/share/miniconda/envs/mcstas/share/mcstas/resources/data/HOPG.rfl' (Table_Read_Offset) Opening input file '/usr/share/miniconda/envs/mcstas/share/mcstas/resources/data/HOPG.trm' (Table_Read_Offset) Reusing input file 'HOPG.rfl' (Table_Read_Offset) Reusing input file 'HOPG.trm' (Table_Read_Offset) Reusing input file 'HOPG.rfl' (Table_Read_Offset) Reusing input file 'HOPG.trm' (Table_Read_Offset) FermiChopper: Suppressor: Frequency nu=82.8587 [Hz] 4971.52 [rpm], time frame=0.0241375 [s] phase=0 [deg] FermiChopper: Suppressor: Frequency nu=82.8587 [Hz] 4971.52 [rpm], time frame=0.0241375 [s] phase=0 [deg] FermiChopper: FermiM: Frequency nu=82.8587 [Hz] 4971.52 [rpm], time frame=0.0241375 [s] phase=-6.24325 [deg] FermiChopper: FermiM: Frequency nu=82.8587 [Hz] 4971.52 [rpm], time frame=0.0241375 [s] phase=-6.24325 [deg] Isotropic_Sqw: Sample: is a hollow cylinder: radius=0.010000 thickness=0.005000 height=0.055000 [J Comp Phys 228 (2009) 5251] Opening input file '/usr/share/miniconda/envs/mcstas/share/mcstas/resources/data/Rb_liq_inc.sqw' (Table_Read_Offset) Opening input file '/usr/share/miniconda/envs/mcstas/share/mcstas/resources/data/Rb_liq_inc.sqw' (Table_Read_Offset) Opening input file '/usr/share/miniconda/envs/mcstas/share/mcstas/resources/data/Rb_liq_inc.sqw' (Table_Read_Offset) Opening input file '/usr/share/miniconda/envs/mcstas/share/mcstas/resources/data/Rb_liq_inc.sqw' (Table_Read_Offset) Isotropic_Sqw: Sample: Temperature set to T=350 [K] Isotropic_Sqw: Sample: S(q,w) data from Rb_liq_inc.sqw (inc) assumed to be classical (symmetrised in energy). Isotropic_Sqw: Sample: Applying exp(hw/2kT) factor with T=350 [K] on Rb_liq_inc.sqw file (classical/symmetric) using 'Frommhold' quantum correction Isotropic_Sqw: Sample: Generated Rb_liq_inc.sqw incoherent Sqw q=[0.1:10 Angs-1] w=[0:101.849 meV] |S|=0.985192 size=[101x10185] sigma=0.5 [barns] normalization factor S(q,w)*0.492586 (auto) \int q^2 S(q) dq=676.701 Opening input file '/usr/share/miniconda/envs/mcstas/share/mcstas/resources/data/Rb_liq_coh.sqw' (Table_Read_Offset) Opening input file '/usr/share/miniconda/envs/mcstas/share/mcstas/resources/data/Rb_liq_coh.sqw' (Table_Read_Offset) Opening input file '/usr/share/miniconda/envs/mcstas/share/mcstas/resources/data/Rb_liq_coh.sqw' (Table_Read_Offset) Opening input file '/usr/share/miniconda/envs/mcstas/share/mcstas/resources/data/Rb_liq_coh.sqw' (Table_Read_Offset) Isotropic_Sqw: Sample: Temperature set to T=350 [K] Isotropic_Sqw: Sample: S(q,w) data from Rb_liq_coh.sqw (coh) assumed to be classical (symmetrised in energy). Isotropic_Sqw: Sample: Applying exp(hw/2kT) factor with T=350 [K] on Rb_liq_coh.sqw file (classical/symmetric) using 'Frommhold' quantum correction Isotropic_Sqw: Sample: Generated Rb_liq_coh.sqw coherent Sqw q=[0.1:10 Angs-1] w=[0:101.849 meV] |S|=0.887933 size=[101x10185] sigma=6.32 [barns] normalization factor S(q,w)*0.477012 (auto) \int q^2 S(q) dq=698.369 FermiChopper: Suppressor: ABSORB Neutron propagation time v*dt/length=0.641577 in slit does not match its length=0.012 (slit exit expected). FermiChopper: Suppressor: ABSORB Neutron propagation time v*dt/length=0.677689 in slit does not match its length=0.012 (slit exit expected). [runnervm6qbrg:16219] 1 more process has sent help message help-btl-vader.txt / cma-permission-denied [runnervm6qbrg:16219] Set MCA parameter "orte_base_help_aggregate" to 0 to see all help / error messages FermiChopper: Suppressor: ABSORB Neutron propagation time v*dt/length=0.972398 in slit does not match its length=0.012 (slit exit expected). FermiChopper: Suppressor: ABSORB Neutron propagation time v*dt/length=0.973239 in slit does not match its length=0.012 (slit exit expected). *** TRACE end *** Save [ILL_IN6] Detector: Mon_SuppInL_I=7.68439e+09 Mon_SuppInL_ERR=4.59604e+06 Mon_SuppInL_N=2.80461e+06 "Mon_SuppInL_1765511998.L" FermiChopper: Suppressor Mean velocity v = 954.882 [m/s] Mean wavelength lambda= 4.14296 [Angs] Mean energy omega = 4.76601 [meV] Mean arrival time t = 0.00227856 [s] Mean phase = 70.1542 [deg] (use phase=-(this value) to optimize) Slit pack divergence = 154.011 [deg] (full width) Opening time dt = 0.295824 [s] Intensity reaching FC = 1.8165e+09 [n/s] Intensity passing FC = 4.86646e+08 [n/s] FermiChopper: Suppressor: Lost events anaylsis Already inside: 0 Detector: Mon_SuppInT_I=7.6843e+09 Mon_SuppInT_ERR=4.59602e+06 Mon_SuppInT_N=2.80457e+06 "Mon_SuppInT_1765511998.t" By Top/Bottom of cylinder: 76942 At cylinder entrance: 475858 Hit cyl. entrance sides: 0 Can't prop. to slit pack: 14790 At slit pack entrance: 119890 On absorbing slit coating: 94361 Exiting slit pack: 0 Too many iterations: 0 Prop. in wrong direction : 0 Mad neutron (no control): 2 At cylinder exit: 232331 Warning: Can not reach slit wall: 0 Warning: Can not reach slit output: 4 FermiChopper: Suppressor Mean velocity v = 954.888 [m/s] Mean wavelength lambda= 4.14293 [Angs] Mean energy omega = 4.76608 [meV] Mean arrival time t = 0.00228103 [s] Mean phase = 70.2278 [deg] (use phase=-(this value) to optimize) Slit pack divergence = 154.011 [deg] (full width) Opening time dt = 0.295824 [s] Intensity reaching FC = 1.81215e+09 [n/s] Intensity passing FC = 4.84061e+08 [n/s] FermiChopper: Suppressor: Lost events anaylsis Already inside: 0 By Top/Bottom of cylinder: 76664 At cylinder entrance: 474949 Hit cyl. entrance sides: 0 Can't prop. to slit pack: 14372 At slit pack entrance: 120462 On absorbing slit coating: 94535 Exiting slit pack: 0 Too many iterations: 0 Prop. in wrong direction : 0 Mad neutron (no control): 3 At cylinder exit: 231478 Warning: Can not reach slit wall: 0 Warning: Can not reach slit output: 9 FermiChopper: FermiM Mean velocity v = 957.066 [m/s] Mean wavelength lambda= 4.1335 [Angs] Mean energy omega = 4.78784 [meV] Mean arrival time t = 0.000160718 [s] Mean phase = 6.04078 [deg] (use phase=-(this value) to optimize) Slit pack divergence = 2.10061 [deg] (full width) Opening time dt = 0.00403485 [s] Intensity reaching FC = 3.18482e+08 [n/s] Detector: Mon_SuppOutT_I=9.63276e+08 Mon_SuppOutT_ERR=775036 Mon_SuppOutT_N=1.55e+06 "Mon_SuppOutT_1765511998.t" Intensity passing FC = 1.27973e+07 [n/s] FermiChopper: FermiM: Lost events anaylsis Already inside: 0 By Top/Bottom of cylinder: 13250 At cylinder entrance: 11997 Hit cyl. entrance sides: 0 Can't prop. to slit pack: 2 At slit pack entrance: 611 On absorbing slit coating: 479026 Exiting slit pack: 0 Too many iterations: 0 Prop. in wrong direction : 0 Mad neutron (no control): 0 At cylinder exit: 35 FermiChopper: FermiM Mean velocity v = 957.059 [m/s] Mean wavelength lambda= 4.13353 [Angs] Mean energy omega = 4.78777 [meV] Mean arrival time t = 0.000161164 [s] Mean phase = 6.05407 [deg] (use phase=-(this value) to optimize) Slit pack divergence = 2.10061 [deg] (full width) Opening time dt = 0.00403485 [s] Intensity reaching FC = 3.17199e+08 [n/s] Intensity passing FC = 1.28504e+07 [n/s] FermiChopper: FermiM: Lost events anaylsis Already inside: 0 By Top/Bottom of cylinder: 12980 At cylinder entrance: 11896 Hit cyl. entrance sides: 0 Can't prop. to slit pack: 0 At slit pack entrance: 538 On absorbing slit coating: 477111 Exiting slit pack: 0 Too many iterations: 0 Prop. in wrong direction : 0 Mad neutron (no control): 0 At cylinder exit: 41 Warning: Can not reach slit wall: 0 Warning: Can not reach slit output: 1 Detector: Mon_FermiOutdT_I=2.5194e+07 Mon_FermiOutdT_ERR=125278 Mon_FermiOutdT_N=40580 "Mon_FermiOutdT_1765511998.t" Detector: MonokMonitor_I=66436.2 MonokMonitor_ERR=321.621 MonokMonitor_N=42815 "MonokMonitor_1765511998.U1_L" Detector: Mon_SampleInT_I=828571 Mon_SampleInT_ERR=4543.15 Mon_SampleInT_N=33375 "Mon_SampleInT_1765511998.t" Detector: Mon_SampleInXY_I=442908 Mon_SampleInXY_ERR=2144.14 Mon_SampleInXY_N=42815 "Mon_SampleInXY_1765511998.x_y" Detector: Out_I=699299 Out_ERR=2091.12 Out_N=135745 "out.dat" Detector: M_theta_t_all_I=118605 M_theta_t_all_ERR=862.765 M_theta_t_all_N=23092 "M_theta_t_all_1765511999.A_E" Finally [ILL_IN6: 1]. Time: 8 [s] Detector: Detector_nM_I=225418 Detector_nM_ERR=1189.77 Detector_nM_N=43873 "Detector_nM.dat" Finally [ILL_IN6: 1]. Time: 8 [s] Isotropic_Sqw: Sample: 516993 neutron events (out of 679743) that should have scattered were transmitted because scattering conditions WARNING could not be satisfied after 100 tries. Isotropic_Sqw: Sample: 480 neutron events (out of 162750) reached WARNING unrealistic weight. The S(q,w) norm might be too high. Isotropic_Sqw: Sample: Scattering fraction=0.0752755 of incoming intensity Absorption fraction =0.123055 Single scattering intensity =663936 (coh=610589 inc=53347) Multiple scattering intensity =35363.1 INFO: Placing instr file copy ILL_IN6.instr in dataset 1 INFO: Placing generated c-code copy ILL_IN6.c in dataset 1