INFO: Using directory: "1"
INFO: Using existing c-file: ./ILL_D4.c
INFO: Using existing binary: ./ILL_D4.out
INFO: ===
--------------------------------------------------------------------------
WARNING: Linux kernel CMA support was requested via the
btl_vader_single_copy_mechanism MCA variable, but CMA support is
not available due to restrictive ptrace settings.

The vader shared memory BTL will fall back on another single-copy
mechanism if one is available. This may result in lower performance.

  Local host: runnervm6qbrg
--------------------------------------------------------------------------
Simulation 'ILL_D4' (ILL_D4.instr): running on 2 nodes (master is 'runnervm6qbrg', MPI version 3.1).
ILL_D4: Detailed DIF configuration
* Incoming beam: lambda=0.7 [Angs] EI=166.9 [meV]  KI=8.976 [Angs-1] Vi=5651.48 [m/s]
* Monochromator:  DM=1.807 [Angs] RV=-0.7182 [m] curved, take-off A1=-11.17 [deg]
ILL_D4: Detailed DIF configuration
* Incoming beam: lambda=0.7 [Angs] EI=166.9 [meV]  KI=8.976 [Angs-1] Vi=5651.48 [m/s]
* Monochromator:  DM=1.807 [Angs] RV=-0.7182 [m] curved, take-off A1=-11.17 [deg]
[ILL_D4] Initialize
[ILL_D4] Initialize
Isotropic_Sqw: Sample: is a cylinder: radius=0.004000 thickness=0.000000 height=0.040000 [J Comp Phys 228 (2009) 5251]
Opening input file '/usr/share/miniconda/envs/mcstas/share/mcstas/resources/data/SiO2_liq.qSq' (Table_Read_Offset)
Opening input file '/usr/share/miniconda/envs/mcstas/share/mcstas/resources/data/SiO2_liq.qSq' (Table_Read_Offset)
Isotropic_Sqw: Sample: Computing scattering unit density V_rho=0.0220518 [AA^-3] from density=2.2 [g/cm^3] weight=60.08 [g/mol].
Isotropic_sqw: Converting 2467 S(q) from SiO2_liq.qSq into S(q,w) data
Isotropic_sqw: q range [0:49.971], creating 2467 elements vector
Isotropic_Sqw: Sample: Generated SiO2_liq.qSq coherent Sqw
                   q=[0:49.971 Angs-1] w=[0:0 meV] |S|=1.01457 size=[2499x1] sigma=10.6 [barns]
               Mainly elastic scattering.
Isotropic_Sqw: Sample: Using Isotropic elastic incoherent scattering (sigma=0.0056 [barns])
Isotropic_Sqw: Sample: Sample temperature not defined (T=0).
Warning        Disabling detailed balance.
Isotropic_Sqw: Sample: Focusing can only apply for single
               scattering. Setting to order=1.
*** TRACE end *** 

Save [ILL_D4]
Detector: PSD_I=2.81507e+09 PSD_ERR=7.25438e+06 PSD_N=150774 "PSD1.dat"
Detector: Lmon1_I=1.0102e+10 Lmon1_ERR=1.37423e+07 Lmon1_N=541062 "Lmon1.dat"
Detector: Lmon2_I=4.30737e+09 Lmon2_ERR=2.83665e+06 Lmon2_N=2.30811e+06 "Lmon2.dat"
Detector: Sample_mon_I=1.84407e+08 Sample_mon_ERR=195123 Sample_mon_N=893668 "Sample_mon_1765511925.x_y"
Detector: BananaTheta_I=1.47564e+06 BananaTheta_ERR=4608.45 BananaTheta_N=193806 "BananaTheta_1765511925.th"

Finally [ILL_D4: 1]. Time: 4 [s] 
Detector: BananaPSD_I=1.7731e+06 BananaPSD_ERR=5133.26 BananaPSD_N=227665 "BananaPSD_1765511925.th_y"

Finally [ILL_D4: 1]. Time: 4 [s] 
Isotropic_Sqw: Sample: 1 neutron events (out of 455200) that should have
               scattered were transmitted because scattering conditions
WARNING        could not be satisfied after 100 tries.
Isotropic_Sqw: Sample: Scattering fraction=0.148827 of incoming intensity
               Absorption fraction           =0.00609357
               Single   scattering intensity =3.54168e+06 (coh=3.53983e+06 inc=1855.35)
               Multiple scattering intensity =0
[runnervm6qbrg:15402] 1 more process has sent help message help-btl-vader.txt / cma-permission-denied
[runnervm6qbrg:15402] Set MCA parameter "orte_base_help_aggregate" to 0 to see all help / error messages
INFO: Placing instr file copy ILL_D4.instr in dataset 1
INFO: Placing generated c-code copy ILL_D4.c in dataset 1