loading system configuration
loading override configuration from /home/nexmap/pkwi/McCode/tools/Python/mctest/../mccodelib/mcstas-test/McStas_8GPU/mccode_config.json
INFO: Using directory: "1"
INFO: Using existing c-file: ./HZB_FLEX.c
INFO: Using existing binary: ./HZB_FLEX.out
INFO: ===
Simulation 'HZB_FLEX' (/home/nexmap/pkwi/TESTS/2023-03-01/McStas_8GPU_5e7/HZB_FLEX/HZB_FLEX.instr): running on 2 nodes (master is 'hypatia.fysik.dtu.dk', MPI version 3.1).
Have found 3 GPU devices on rank 0. Will use device 0.
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
[HZB_FLEX] Initialize
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
Have found 3 GPU devices on rank 1. Will use device 1.
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
[HZB_FLEX] Initialize
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
*** TRACE end *** 

Save [HZB_FLEX]
Detector: Before_selec_I=2.97229e+07 Before_selec_ERR=19613 Before_selec_N=4.14319e+06 "PSD_monitor_before.dat"
Detector: After_selec_I=2.03711e+07 After_selec_ERR=16245.4 After_selec_N=2.42121e+06 "PSD_monitor_after.dat"
Detector: energy_endguide_I=1.32743e+07 energy_endguide_ERR=12560.8 energy_endguide_N=1.6447e+06 "energy-endguide.dat"
<E> : 4.95159 meV , E-width : 0.529227 meV 
<E> : 4.9526 meV , E-width : 0.525784 meV 
Detector: energy_mono_I=4.32431e+06 energy_mono_ERR=7171.75 energy_mono_N=531420 "energy-mono.dat"
<E> : 4.97682 meV , E-width : 0.117972 meV 
<E> : 4.97808 meV , E-width : 0.088296 meV 
Detector: energy_pre_sample_I=3.65751e+06 energy_pre_sample_ERR=6683.14 energy_pre_sample_N=384938 "energy-pre-sample.dat"
<E> : 4.97688 meV , E-width : 0.0900781 meV 
<E> : 4.97706 meV , E-width : 0.103538 meV 
Detector: div_mono_I=4.06945e+06 div_mono_ERR=6998.15 div_mono_N=454147 "div-sample.dat"
Detector: div_mono_H_I=358907 div_mono_H_ERR=2064.3 div_mono_H_N=44468 "H-div-sample.dat"
Detector: psd_sam_I=4.34071e+06 psd_sam_ERR=7179.66 psd_sam_N=537455 "psd-sam.dat"

Finally [HZB_FLEX: 1]. Time: 18 [s] 
Detector: dpsd1_I=4.34071e+06 dpsd1_ERR=7179.66 dpsd1_N=537455 "linpsdsam.dat"

Finally [HZB_FLEX: 1]. Time: 18 [s] 
INFO: Placing instr file copy /home/nexmap/pkwi/TESTS/2023-03-01/McStas_8GPU_5e7/HZB_FLEX/HZB_FLEX.instr in dataset 1