INFO: Using directory: "1"
INFO: Using existing c-file: ./HZB_FLEX.c
INFO: Using existing binary: ./HZB_FLEX.out
INFO: ===
Component: elliptical_piece (Guide_tapering)
           Height at the guide exit (h2): 0.125000 
Component: elliptical_piece (Guide_tapering)
           Width at the guide exit (w2): 0.030412 
monochromator angles are:
 A1=-37.166, A2=-74.332 [deg]
radius of curvature RMH= -3.269 [m]
radius of curvature RMV= -2.386 [m] 
sample angles are:
 A3=  0.000, A4= 70.000 [deg]
analyser angles are:
 A5=-37.166, A6=-74.332 [deg]
radius of curvature RAH= -1.655 [m]
radius of curvature RAV= -0.813 [m] 
velocity selector frequency is 213.618 [Hz]
lambda=  4.054 [A]
kI=  1.550 [A^-1] 
EI=  4.978 [meV]
Maxwellian source forced to emit only between l_min=  3.958 and l_max=  4.149 [A] in order to save simulation time
correspondingly, the energy monitors at sample position are detecting between   4.752 and   5.222 [meV]
[HZB_FLEX] Initialize
*** TRACE end *** 

Save [HZB_FLEX]
Detector: Before_selec_I=2.97293e+07 Before_selec_ERR=19613.2 Before_selec_N=4.14609e+06 "PSD_monitor_before.dat"
Detector: After_selec_I=2.03759e+07 After_selec_ERR=16245.1 After_selec_N=2.42257e+06 "PSD_monitor_after.dat"
Detector: energy_endguide_I=1.32613e+07 energy_endguide_ERR=12551.9 energy_endguide_N=1.64467e+06 "energy-endguide.dat"
<E> : 4.9947 meV , E-width : -nan meV 
Detector: energy_mono_I=4.32888e+06 energy_mono_ERR=7175.15 energy_mono_N=532216 "energy-mono.dat"
<E> : 4.96977 meV , E-width : -nan meV 
Detector: energy_pre_sample_I=3.66092e+06 energy_pre_sample_ERR=6685.74 energy_pre_sample_N=385537 "energy-pre-sample.dat"
<E> : 4.98199 meV , E-width : -nan meV 
Detector: div_mono_I=4.07258e+06 div_mono_ERR=7000.17 div_mono_N=454724 "div-sample.dat"
Detector: div_mono_H_I=358866 div_mono_H_ERR=2063.59 div_mono_H_N=44477 "H-div-sample.dat"
Detector: psd_sam_I=4.34476e+06 psd_sam_ERR=7182.73 psd_sam_N=538177 "psd-sam.dat"
Detector: dpsd1_I=4.34476e+06 dpsd1_ERR=7182.73 dpsd1_N=538177 "linpsdsam.dat"

Finally [HZB_FLEX: 1]. Time: 3 [s] 
INFO: Placing instr file copy /zhome/89/0/38697/TESTS/2022-04-01/McStas_GPU_PGCC_TESLA_KISS_5e7/HZB_FLEX/HZB_FLEX.instr in dataset 1
loading system configuration
loading override configuration from /zhome/89/0/38697/McCode/tools/Python/mctest/../mccodelib/mcstas-test/McStas_GPU_PGCC_TESLA_KISS/mccode_config.json